ADSM-L@VM.MARIST.EDU
To
ADSM-L
cc
Subject
Re: [ADSM-L] Server media mount not possible
Hi Geoff,
The messages manual says "Ensure that the MAXNUMMP (maximum number of
mount points) defined on the server for this node is greater than 0."
What is the maxnummp for the node?
I ver
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Geoff
Gill
Sent: Thursday, October 11, 2012 8:49 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Server media mount not possible
I thought I'd throw this out there for ideas since I'm just being exposed to
NAS backpus and resto
alnch...@yahoo.com
To
ADSM-L
cc
Subject
[ADSM-L] Server media mount not possible
I thought I'd throw this out there for ideas since I'm just being exposed
to NAS backpus and restores. I believe I got a previous post yesterday
figured out and was finally able to move on to testing a resto
nd clicked restore.
5. Within a few seconds I received a popup with the error "Server media mount
not possible.
I watched this process from the TSM server and during step 2 I watched the
server mount the tape to draw the TOC from. While the tape was still mounted,
Idle, I clicked the restore
On Oct 27, 2006, at 12:53 AM, Murugan_Pachamallayan wrote:
I was started the TSM Server backup I got the following error message.
"Server media mount not possible"
Can any one please help me out in this regard
First, do not strip message numbers off of messages you post when
se
Hi all,
I was started the TSM Server backup I got the following error message.
"Server media mount not possible"
Can any one please help me out in this regard
Thanks in advance
Regards,
Murugan
DISCLAIMER:
This email (including any attachments) is intend
>I'm using TSM server 5.2 on IBM AIX 5.2 and facing the
>following MESSEAGE while running backup.
>
>"ANS1312E Server media mount not possible"
>
>I'm junor at TSM, so anybody can show me how to debug
>the things ?
You don't mention that you'
Address AutoComplete - You start. We finish.
http://promotions.yahoo.com/new_mail--- Begin Message ---
Hi All,
I'm using TSM server 5.2 on IBM AIX 5.2 and facing the
following MESSEAGE while running backup.
"ANS1312E Server media mount not possible"
I'm junor at TSM, so anybod
>You could determine which drives had tapes mounted in them, but it would
>be a matter of piecing through the activity log looking for mounts and
>dismounts, which can be laborious. ...
There are third-party packages which do this kind of thing, to help make
TSM administration a bit easier. Gener
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On
Behalf Of Gill, Geoffrey L.
>From looking at the log below it looks like this backup failed
>because the
>backup could not mount a tape. The server logs do show migrations and
>reclamation running at this time. The disk pool itself is set
ects compressed by: 100%
06/10/04 04:55:06 Elapsed processing time: 00:21:30
06/10/04 04:55:06 --- SCHEDULEREC STATUS END
06/10/04 04:55:06 ANS1312E Server media mount not possible
06/10/04 04:55:06 --- SCHEDULEREC OBJECT END PEOPLESOFT-LATE-M-F 06/10/04
04:30:00
As alwa
2:01:18 Server media mount not possible
02/04/2004 22:02:04 Server media mount not possible
02/04/2004 22:03:08 GetDfsEnum(): Server=\\usptml01, NetDfsEnum() returns
RC=259.
02/05/2004 00:05:59 sessSendVerb: Error sending Verb, rc: -50
02/05/2004 00:05:59 ANS1809W Session is lost; initializing sess
rver media mount not possible
02/04/2004 22:02:04 Server media mount not possible
02/04/2004 22:03:08 GetDfsEnum(): Server=\\usptml01, NetDfsEnum() returns
RC=259.
02/05/2004 00:05:59 sessSendVerb: Error sending Verb, rc: -50
02/05/2004 00:05:59 ANS1809W Session is lost; initializing session reopen
procedu
been for many
months.
Since the upgrade, I have started getting the "ANS1312E Server Media Mount
Not Possible".
The RESOURCEUTILIZATION parameter was set to 4 on a few of the clients, but
was not set on others.
The MAXNUMMP for all the clients was set at the default of 2.
As I mentioned,
been for many
months.
Since the upgrade, I have started getting the "ANS1312E Server Media Mount
Not Possible".
The RESOURCEUTILIZATION parameter was set to 4 on a few of the clients, but
was not set on others.
The MAXNUMMP for all the clients was set at the default of 2.
As I mentioned,
many
months.
Since the upgrade, I have started getting the "ANS1312E Server Media Mount
Not Possible".
The RESOURCEUTILIZATION parameter was set to 4 on a few of the clients, but
was not set on others.
The MAXNUMMP for all the clients was set at the default of 2.
As I mentioned, it w
<[EMAIL PROTECTED]To:
> [EMAIL PROTECTED]
> M> cc:
> Sent by: "ADSM:
> Subject: media mount not possible
> Dist Stor
> Manager"
&
PROTECTED]
Bill Zhang
<[EMAIL PROTECTED]To: [EMAIL PROTECTED]
M> cc:
Sent by: "ADSM: Subject: media mount not possible
Dist Stor
ratch wolume" to 15
for the tape pool 3584TAPEPOOL1.
mount limit is DRIVES
When I tried to make a full backup, it pop up a
message
"server media mount not possible" and in the log, it
says
ANR0535W insufficient mount points available to
satisfy the request.
I don't know what i
]]
Sent: Wednesday, December 18, 2002 10:38 AM
To: [EMAIL PROTECTED]
Subject: Re: Idle system fails with Media mount not possible
well, by using the piecemeal method of successfully individually backing up
everything that failed i have finally been able to run a successfull system
wide backup. strange
Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
To: ADSM-L
cc:
Subject: Re: Idle system fails with Media mount not possible
well, by using the piecemeal method of successfully individually backing
up
everything that failed i have
problem?
-Original Message-
From: Kent Monthei [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, December 18, 2002 9:59 AM
To: [EMAIL PROTECTED]
Subject: Re: Idle system fails with Media mount not possible
On the client, do a 'dsmc show opt' and a 'dsmc q inclexcl' to check
with Media mount not possible
So are you saying that the management class that the directories are
atracting
is pointing them
to the same disk storage pool which you said had plenty of space.
**
The information in this E-Mail
So are you saying that the management class that the directories are atracting
is pointing them
to the same disk storage pool which you said had plenty of space.
**
The information in this E-Mail is confidential and may be lega
From: Kent Monthei [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, December 18, 2002 9:59 AM
To: [EMAIL PROTECTED]
Subject: Re: Idle system fails with Media mount not possible
On the client, do a 'dsmc show opt' and a 'dsmc q inclexcl' to check for
stray management-class binding
Dist Stor Manager" <[EMAIL PROTECTED]>
To: ADSM-L
cc:
Subject:Re: Idle system fails with Media mount not possible
The strange thing as that other clients are backing up fine... these are
three very similar, nearly identical clients, all configured
SM: Dist Stor Manager" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
cc:(bcc: John Naylor/HAV/SSE)
Subject: Re: Idle system fails with Media mount not possible
yes, it is always failing on the same file(s) in the same directory. how
would it attract a different management class? this
: Wednesday, December 18, 2002 9:35 AM
To: [EMAIL PROTECTED]
Subject: Re: Idle system fails with Media mount not possible
Does it fail on the same file or directory every time, and does that file or
directory attract
a management class which is pointing to a different storage pool
"Conko, S
t; <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
cc:(bcc: John Naylor/HAV/SSE)
Subject: Re: Idle system fails with Media mount not possible
The strange thing as that other clients are backing up fine... these are
three very similar, nearly identical clients, all configured exactly the
s
The strange thing as that other clients are backing up fine... these are
three very similar, nearly identical clients, all configured exactly the
same. the others backup fine, and this incremental keeps failing in the same
spot with the media mount not possible.
-Original Message-
From
roblem.
Thanks,
Rob.
From: "Conko, Steven" <[EMAIL PROTECTED]> on 12/18/2002 09:03 AM
Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
cc:
Subject: Re: Idle system fails with Media mount not possible
the client was alrea
yes, its at ML 10.
-Original Message-
From: David Longo [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, December 17, 2002 7:12 PM
To: [EMAIL PROTECTED]
Subject: Re: Idle system fails with Media mount not possible
You didn't mention the Maint Level of AIX 4.3.3. If you have less
than
From: "Conko, Steven" <[EMAIL PROTECTED]> on 12/17/2002 04:19 PM
Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
cc:
Subject: Idle system fails with Media mount not possible
strange one... and ive looked at every
: "Conko, Steven" <[EMAIL PROTECTED]> on 12/17/2002 04:19 PM
Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
cc:
Subject: Idle system fails with Media mount not possible
strange one... and ive looked at everything i can think
MMP for the
node
when... this new wrinkle occurred.
The SQL 6.5 server started having problems backing up certain
databases:
the smaller system databases; master, model, msdb, pubs, tempdb, with
and
error message of "server media mount not possible". All the DBs on
this
server have a desti
>ANR0535W Transaction failed for session 1356 for node
>SY00113 (AIX) - insufficient mount points available to
>satisfy the request.
>
>There is NOTHING else running on this TSM server. All 6 drives are online.
Nothing running can itself be an indication of things suspicious...
It may be that TSM
message of "server media mount not possible". All the DBs on this
server have a destination of ltotape_sql. Like you, plenty of room in the
storage pool, plenty of scratch.
Called support
Got level one.. told him a few things.. he didn't even want to try it.. and
immediately escal
strange one... and ive looked at everything i can think of.
In client dsmerror.log:
12/17/02 15:01:54 ANS1228E Sending of object
'/tibco/logs/hawk/log/Hawk4.log' failed
12/17/02 15:01:54 ANS1312E Server media mount not possible
12/17/02 15:01:57 ANS1312E Server media mount no
astev
IT Consultant
Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
Sent by:"ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
cc:
Subject: ANS1312E Server media mount not possible
I assume that "
Manager [mailto:[EMAIL PROTECTED]]On Behalf Of
Burak Demircan
Sent: Wednesday, August 21, 2002 6:05 AM
To: [EMAIL PROTECTED]
Subject: Re: ANS1312E Server media mount not possible
the high and low tresholds of any stg pool determines when the data is moved
to
the next
pool.
see below options are from
[EMAIL PROTECTED]
Sent by: [EMAIL PROTECTED]
21.08.2002 15:47
Please respond to ADSM-L
To: [EMAIL PROTECTED]
cc:
Subject: Re: ANS1312E Server media mou
>think this also:
>this volume may be full and next storage which is most probably a
tapepool
>need
>a mount point?
Which parameter controls how long a backup session will wait for a
mount of a secondary storage pool volume after the primary storage pool
fills?
To: [EMAIL PROTECTED]
cc:
Subject: Re: ANS1312E Server media mount not possible
Hi
Check the status of volumes " q vol"
Use "vary on" command to make offline volumes online.
Reg
ECTED]
ST.EDU>
08/20/2002
09:42 PM
Please respond
to "ADSM: Dist
Stor Manager"
I assume that "ANS1312E Server media mount not possible
Explanation: Server media mount
How about disk is full and all drives are busy so backup goes to secondary
storage which is tape?
Quoting David E Ehresman <[EMAIL PROTECTED]>:
> I assume that "ANS1312E Server media mount not possible
>
> Explanation: Server media mount not possible. Th
I assume that "ANS1312E Server media mount not possible
Explanation: Server media mount not possible. The server timed
out
waiting for a mount of an offline volume." refers to mounting a
sequential acess media? If my assumption is correct, under what
conditions shoul
12-04-2002 19:53:37 --- SCHEDULEREC STATUS END
12-04-2002 19:53:37 ANS1312E Server media mount not possible
To: [EMAIL PROTECTED]
Subject: Re: "Server media mount not
possible" error condition
Sent by: "ADSM:
Dist Stor
Manager"
<[EMAIL PROT
Ken
Try a q node f=d to check to make sure that you have mount points greater
then 0
Becky
-Original Message-
From: Ken Sedlacek [mailto:[EMAIL PROTECTED]]
Sent: Friday, January 18, 2002 10:25 AM
To: [EMAIL PROTECTED]
Subject: "Server media mount not possible" error condition
started getting the "ANS1312E Server media mount not possible" errors a
few days ago.
Actual dsmerror.log:
01/17/02 03:27:56 ANS1312E Server media mount not possible
01/17/02 03:27:56 ANS1512E Scheduled event 'RS6000H70' failed. Return
code =
4.
# castor :/ ==>
The dsms
Wednesday, January 02, 2002 2:05 PM
Subject: Server media mount not possible
> Hello,
>
> Can anyone help me with this error. Receiving "ANS1312E Server media
mount
> not possible" while running backups. The
> error is intermittent, not receiving it on all backups. I am cu
Hello,
Can anyone help me with this error. Receiving "ANS1312E Server media mount
not possible" while running backups. The
error is intermittent, not receiving it on all backups. I am currently
running TSM 4.1.3.0 and the client is 4.1.0.0.
We are backing up straight to tape, and all
r 2001 21:10, you wrote:
> > How do I check to see what my Resourceutilization is currently set to?
> >
> > -Original Message-
> > From: Rolf Meyer [mailto:[EMAIL PROTECTED]]
> > Sent: Thursday, October 11, 2001 1:41 PM
> > To: [EMAIL PROTECTED]
>
First thing I can suggest is a swift upgrade to TSM 4.1.4.0 on AIX. I've
got it installed at two client sites (using 3995 Optical jukeboxes and LTO)
and seems quite stable.
>From the messages manual (thank you, Adobe Acrobat Catalog...):
ANS1312E Server media mount not possible
Exp
ounces that
it lacks room to back up the file, and the operation stops abruptly
with a "server media mount not possible" message.
This chain of events could explain why the client error and schedule
logs reflect this message, but the server activity log doesn't.
The only workaroun
"ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
cc:
Subject: Re: server media mount not possible
Yes. I'm sure of this because the migration from disk to tape works fine.
Nancy Reeves
Technical Support, Wichita State University
[EMAIL PROTECTED]
d has scratches available to it?
"Nancy Reeves" <[EMAIL PROTECTED]>@VM.MARIST.EDU> on 10/23/2001
10:54:19 AM
Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
To: [EMAIL P
<[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
cc:
Subject: server media mount not possible
Can anyone point me to a fuller description or explanation of that error
message (in the subject)? It has no message numbe
Can anyone point me to a fuller description or explanation of that error
message (in the subject)? It has no message number, and is in the client's
dsmerror.log and a pop up window. There are no error messages in the
server activity log, and I know that all the drives in the robot/library
are avai
Hi:
I've
1). added a copy group for archives of Novell files
2). validated and activated the policy
When the Novell admin goes to do archives he gets:
ANS1312E Server media mount not possible, yet the drives are available.
Any suggestions?
Policy Domain Name: N
luck..
From South Korea
Cddata co.ltd.
- Original Message -
From: "Bo Nielsen" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, March 05, 2001 6:17 PM
Subject: ANS1312E Server media mount not possible
> Hi
>
> Can somebody help me.
>> Fra: Palmadesso Jack[SMTP:[EMAIL PROTECTED]]
>> That sounds like that is exactly your problem. I was caught
>by this when
>> we
>> moved our first server to TSM. I believe 3.7 sets these to
>0. You will
>> have to make it something other than 0 for it to work.
Having just upgraded to the m
PROTECTED]
> Emne: Re: Antwort: ANS1312E Server media mount not possible
>
> That sounds like that is exactly your problem. I was caught by this when
> we
> moved our first server to TSM. I believe 3.7 sets these to 0. You will
> have to make it something other than 0 for it
: Monday, March 05, 2001 6:51 AM
To: [EMAIL PROTECTED]
Subject: Antwort: ANS1312E Server media mount not possible
The client tries to write directly into a sequentiel storage pool and on the
server
the point MAX MOUNT POINTS for the client ist set to zero
Answer from dsmc:
dsmc h
39
Explanation: Server media mount not possible. The server timed out
waiting
for a mount of an offline volume.
System Action: File skipped.
User Response: Retry later when server volumes can be mounted.
The server couldn't mount a tape and reached a ti
The client tries to write directly into a sequentiel storage pool and on the
server
the point MAX MOUNT POINTS for the client ist set to zero.
__
Da E-Mails leicht unter fremdem Namen erstellt oder manipuliert werden
ko
Hi
Can somebody help me.
A W2K Server TSM Client vers. 4.1.1
TSM server OS/390 4.1.1.0
StorageTek VSM tape library.
When I run a backup, I receive the follow error message:
ANS1312E Server media mount not possible
Can any tell me what the problem is.
Regards,
Bo Nielsen
FDB data
TED]
Subject: ANS1312E Server media mount not possible
Hi:
Yet another peculiar situation that has popped up since the upgrade to TSM
3.7.2 on the server:
Backgound:
- the problem only occurs on this node in an SP environment
- the node is the control workstation
- I can ping the backup (TSM) server
>Hi Richard and list:
>TSM support cracked this one: The parameter for node RSCWS had its =
>maxmountpoint ( new client parm as of 3.7) set to 0. Do not know how/why, =
>since all other nodes were set to unlimited.
Larry - Thanks for the final resolution. I'll make note of that one.
It goes to
IL PROTECTED]
cc:
Subject: Re: ANS1312E Server media mount not possible
>10/11/00 12:50:04 ANR0406I Session 7978 started for node RSCWS (AIX) =
> (Tcp/Ip 129.10.199.10(40421)).
>10/11/00 12:50:09 ANR0406I Session 7979 started for node RSCWS (AIX) =
>
:[EMAIL PROTECTED]]
Sent: Wednesday, October 11, 2000 11:09 AM
To: [EMAIL PROTECTED]
Subject: ANS1312E Server media mount not possible
Hi:
Yet another peculiar situation that has popped up since the upgrade to TSM
3.7.2 on the server:
Backgound:
- the problem only occurs on this node in an SP
ANR0403I Session 7979 ended for node RSCWS (AIX).
>10/11/00 12:50:11 ANR0480W Session 7978 for node RSCWS (AIX) terminated =
> - connection with client severed.
>
>
>>> [EMAIL PROTECTED] 10/11/00 11:33AM >>>
>>ANS1312E Server media mount
on state transition error, sessState: sSigned
On.
10/11/00 13:58:52 sessOpen: Transitioning: sSignedOn state ===> sTRANSERR stat
e
10/11/00 13:58:52 ANS1312E Server media mount not possible
>>> [EMAIL PROTECTED] 10/11/00 01:46PM >>>
>10/11/00 12:50:04 ANR0406I Session
NR0403I Session 7979 ended for node RSCWS (AIX).
>10/11/00 12:50:11 ANR0480W Session 7978 for node RSCWS (AIX) terminated =
> - connection with client severed.
>
>
>>> [EMAIL PROTECTED] 10/11/00 11:33AM >>>
>>ANS1312E Server media mount
nated -
connection with client severed.
>>> [EMAIL PROTECTED] 10/11/00 11:33AM >>>
>ANS1312E Server media mount not possible
Larry - Given that all drives are free at the time and that this happens
only with this SP node, I'd begin by comparing the output of a
&#
>ANS1312E Server media mount not possible
Larry - Given that all drives are free at the time and that this happens
only with this SP node, I'd begin by comparing the output of a
'dsmc q mgm' from that node and a successful node and see if any
difference. The mount f
0
Total number of bytes transferred: 790.12 KB
Data transfer time:1.70 sec
Network data transfer rate: 462.54 KB/sec
Aggregate data transfer rate: 97.91 KB/sec
Objects compressed by: 0%
Elapsed processing time: 00:00:08
ANS1312E Server media mount not possible
Larry Clark
NYS Thruway Authority
77 matches
Mail list logo
