We made a mistake today. We are totally routed … so it has been a while since
we did anything VLAN related.
We have lost management access to the AP.
We turned VLAN configuration ON
Allow Frames ALL
Dynamic Learning Enabled
Management VID is 1
Vlan Membership configuration had a VLAN of 347
Shouldn't be. Here is a screen shot of the VLAN membership tab one of
ours that's configured the same way:
[image: Inline image 1]
Management is on VLAN1, and I can get into it fine. This is plugged into
a Layer 3 switch at the bottom.
On Tue, Mar 24, 2015 at 5:32 PM, Andreas Wiatowski
The management VID should always be permanent in the membership table,
i.e. you do not have to add it. Just remember that VLAN 1 is treated
differently on Canopy, it is always untagged. I believe it will ignore
any VLAN 1 tagged frames. So perhaps you are trying to send VLAN 1 as
tagged and
Have not tried this recently but If you can get a SM to register to the AP you
can telnet back to the AP.
Mark Radabaugh
Amplex
27800 Lemoyne, Ste F
Millbury, OH 43447
419-261-5996
On Mar 24, 2015, at 7:32 PM, Andreas Wiatowski andr...@silowireless.com
wrote:
We made a mistake today.
for the suggestion.
-Andreas
--
From: Mark Radabaugh
Reply-To: af@afmug.commailto:af@afmug.com
Date: Tuesday, March 24, 2015 at 8:39 PM
To: af@afmug.commailto:af@afmug.com
Subject: Re: [AFMUG] 450 Vlan tagging
Have not tried this recently but If you can get a SM to register to the AP you
can telnet back