With Epmp? Canopy? No ipv6. Technically ubnt kinda has ipv6.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Dec 18, 2014 6:47 PM, "Dave White via Af" wrote:
> Could ipv6 be used instead of rtables?
>
> DaveW
>
>
> On 12/17/2014 3:42 PM, Mark
Could ipv6 be used instead of rtables?
DaveW
On 12/17/2014 3:42 PM, Mark Radabaugh via Af wrote:
Virtual Routing Instances:
http://www.packetmischief.ca/2011/09/20/virtualizing-the-openbsd-routing-table/
Mark
On 12/17/14, 5:33 PM, Josh Luthman via Af wrote:
How exactly does that work? Not
: [AFMUG] Canopy v13.2 and SNMP Bug?
Virtual Routing Instances:
http://www.packetmischief.ca/2011/09/20/virtualizing-the-openbsd-routing-table/
Mark
On 12/17/14, 5:33 PM, Josh Luthman via Af wrote:
How exactly does that work? Not familiar with Soekris. My issue is having the
same IP on 7
Holy crap. That's some neat stuff!!! Seems pretty simple to put together
and use, too!
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Dec 17, 2014 5:42 PM, "Mark Radabaugh via Af" wrote:
> Virtual Routing Instances:
>
>
> http://www.packetmis
Tushar,
We do most of the programming using SNMP traps when the CPE registers.
The configuration tool we built for the office takes care of defaulting the
unit, pushing the "Read/Write SNMP" button, sets the radios to 20Mhz (or 10Mhz
for 3.65), sets the appropriate frequencies (no 5.4, all 5.7
Mark,
I thought you had SNMP trap setup for radios and programmed dynamically?
Tushar
> On Dec 17, 2014, at 4:30 PM, Mark Radabaugh via Af wrote:
>
> We finally got around to building a 8 port "SM Programmer" out of a Soekris
> board and OpenBSD.It has 7 Ethernet ports on the front. Plu
Virtual Routing Instances:
http://www.packetmischief.ca/2011/09/20/virtualizing-the-openbsd-routing-table/
Mark
On 12/17/14, 5:33 PM, Josh Luthman via Af wrote:
How exactly does that work? Not familiar with Soekris. My issue is
having the same IP on 7 interfaces talking to the same IP on eac
How exactly does that work? Not familiar with Soekris. My issue is having
the same IP on 7 interfaces talking to the same IP on each said interface.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Wed, Dec 17, 2014 at 5:30 PM, Mark Radabaugh vi
We finally got around to building a 8 port "SM Programmer" out of a
Soekris board and OpenBSD.It has 7 Ethernet ports on the front.
Plug a SM with a default plug in and of the 7 ports and it blows all the
template onto it and lets you know when it's done.
Saves a lot of time for inside gu
ng.
>> >
>> > I will open an issue for this.
>> >
>> > The obvious workaround (until fixed) would be to set the IPv4 Filter
>> > after setting the IPv6 filter in your script.
>> >
>> > Best,
>> >
>> > Jonathan
>> >
&
o:af-boun...@afmug.com>] On Behalf Of Matt via Af
> Sent: Monday, December 08, 2014 2:53 PM
> To: af@afmug.com <mailto:af@afmug.com>
> Subject: Re: [AFMUG] Canopy v13.2 and SNMP Bug?
>
> Further investigation. To repeat it.
>
> First res
ter in your script.
> >
> > Best,
> >
> > Jonathan
> >
> > -Original Message-----
> > From: Af [mailto:af-boun...@afmug.com] On Behalf Of Matt via Af
> > Sent: Monday, December 08, 2014 2:53 PM
> > To: af@afmug.com
> > Subjec
ehalf Of Matt via Af
> Sent: Monday, December 08, 2014 2:53 PM
> To: af@afmug.com
> Subject: Re: [AFMUG] Canopy v13.2 and SNMP Bug?
>
> Further investigation. To repeat it.
>
> First reset factory defaults to a 3.6 sm running 13.2 then reboot.
> Enable SNMP read/write
: Af [mailto:af-boun...@afmug.com] On Behalf Of Matt via Af
Sent: Monday, December 08, 2014 2:53 PM
To: af@afmug.com
Subject: Re: [AFMUG] Canopy v13.2 and SNMP Bug?
Further investigation. To repeat it.
First reset factory defaults to a 3.6 sm running 13.2 then reboot.
Enable SNMP read/write in GUI
] On Behalf Of Matt via Af
> Sent: Monday, December 08, 2014 12:01 PM
> To: af@afmug.com
> Subject: [AFMUG] Canopy v13.2 and SNMP Bug?
>
> allIpv4Filter
> Object ID: 1.3.6.1.4.1.161.19.3.3.2.132
>
> snmpset -v 2c -c Canopy 169.254.1.1 .1.3.6.1.4.1.161.19.3.3.2.132.0 i 1
>
&
ject: [AFMUG] Canopy v13.2 and SNMP Bug?
allIpv4Filter
Object ID: 1.3.6.1.4.1.161.19.3.3.2.132
snmpset -v 2c -c Canopy 169.254.1.1 .1.3.6.1.4.1.161.19.3.3.2.132.0 i 1
Keep trying to set the allip4filter with SNMP on a 3.6 450 SM running
13.2 and it does not seem to work. Anyone else see an issue
allIpv4Filter
Object ID: 1.3.6.1.4.1.161.19.3.3.2.132
snmpset -v 2c -c Canopy 169.254.1.1 .1.3.6.1.4.1.161.19.3.3.2.132.0 i 1
Keep trying to set the allip4filter with SNMP on a 3.6 450 SM running
13.2 and it does not seem to work. Anyone else see an issue with it?
Setting the allipv6filter does
17 matches
Mail list logo