[AFMUG] Exalt ExtremeAir

Anybody seen the error "Ethernet port 1 input alarm" on an Exalt Extremeair radio? I seem to be getting them when I try to pass packet sizes larger than 1500 bytes. Link is up at 1G full and I've tried both a laptop plugged into the radio power supply directly as well as from a MKT CCR router

Re: [AFMUG] Exalt firmware

s" <cstann...@gmail.com> *To: *af@afmug.com *Sent: *Tuesday, January 16, 2018 11:45:22 AM *Subject: *Re: [AFMUG] Exalt firmware Note: According to the ExtendAir G2 1.4.3 upgrade notes, if you have very early firmware you can upgrade your link to 1.1.0 then jump straight to

[AFMUG] Exalt support - FYI

To anyone else who has had issues contacting Exalt Communications support ( supp...@exaltcom.com seems to have had issues for some time), I was using an alternate e-mail address at a support subcontractor that has worked well: exaltsupp...@starmicrowave.com . If you need earlier radio firmware, I

Re: [AFMUG] Exalt firmware

. Speculation, of course. - Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP - Original Message - From: "Colin Stanners" <cstann...@gmail.com> To: af@afmug.com Sent: Tuesday, January 16, 2018 11:45:22 AM Subject: Re: [AFMUG

Re: [AFMUG] Exalt firmware

Note: According to the ExtendAir G2 1.4.3 upgrade notes, if you have very early firmware you can upgrade your link to 1.1.0 then jump straight to 1.4.2 (which needs to be programmed in twice for reasons that I don't fully understand), then to 1.4.3. I can send you 1.1.0 firmware if you want. On

Re: [AFMUG] Exalt firmware

I'll check On Jan 15, 2018 3:38 PM, "George Skorup" wrote: > Looking for ExtendAir G2 release 1.2.2. Anybody have it? >

Re: [AFMUG] Exalt firmware

I have many other releases but not that one. On Mon, Jan 15, 2018 at 3:38 PM, George Skorup wrote: > Looking for ExtendAir G2 release 1.2.2. Anybody have it? >

[AFMUG] Exalt firmware

Looking for ExtendAir G2 release 1.2.2. Anybody have it?

Re: [AFMUG] Exalt firmware

I will send them. On Sep 14, 2017 2:25 AM, "George Skorup" wrote: > "You don’t have access to this content." > > So, I opened a ticket with Exalt support about 3 weeks ago and they said > they'd give me this Dropbox access. Never happened. How nice of them. > > On

Re: [AFMUG] Exalt firmware

I will send them. On Sep 14, 2017 2:25 AM, "George Skorup" wrote: > "You don’t have access to this content." > > So, I opened a ticket with Exalt support about 3 weeks ago and they said > they'd give me this Dropbox access. Never happened. How nice of them. > > On

Re: [AFMUG] Exalt firmware

"You don’t have access to this content." So, I opened a ticket with Exalt support about 3 weeks ago and they said they'd give me this Dropbox access. Never happened. How nice of them. On 9/14/2017 2:11 AM, Colin Stanners wrote: Dropbox from Exalt techs

Re: [AFMUG] Exalt firmware

Dropbox from Exalt techs https://www.dropbox.com/l/scl/AAAJyFwsMOQP6afZPf0jaf2R_YPm2RLUIA8 https://www.dropbox.com/l/scl/AABphkiQYarhcrT18s0rIEfaVJykW4zmzR4 On Thu, Sep 14, 2017 at 1:57 AM, George Skorup wrote: > Anybody have the ExtendAir G2 1.4.2/1.4.3 release zip?

[AFMUG] Exalt firmware

Anybody have the ExtendAir G2 1.4.2/1.4.3 release zip?

Re: [AFMUG] Exalt Diplexers

Might be worth a shot! I'll see what I can dig up. On Tue, Jun 27, 2017 at 8:39 PM, Jaime Solorza wrote: > A couple of years ago ,we installed an Exalt link for city of Midland PD. > They had several diplexers extra due to mix up. Not sure if they kept > them...we

Re: [AFMUG] Exalt Diplexers

Oh yes, I suppose that would be good info to have.. 11Ghz Band 1. Good catch, sorry about that! On Tue, Jun 27, 2017 at 8:43 PM, Colin Stanners wrote: > Band 1 of which frequency range? > > On Tue, Jun 27, 2017 at 7:54 PM, Adair Winter >

Re: [AFMUG] Exalt Diplexers

Forgot to mention...these were 11GHz versions... Jaime Solorza On Jun 27, 2017 7:39 PM, "Jaime Solorza" wrote: > A couple of years ago ,we installed an Exalt link for city of Midland PD. > They had several diplexers extra due to mix up. Not sure if they kept >

Re: [AFMUG] Exalt Diplexers

Band 1 of which frequency range? On Tue, Jun 27, 2017 at 7:54 PM, Adair Winter wrote: > I'm looking for a set of Band 1 diplexers for Exalt ExtendAir G2. Anyone > have any they want to sell? > > -- > > Adair Winter > VP, Network Operations / Co-Owner > Amarillo

Re: [AFMUG] Exalt Diplexers

A couple of years ago ,we installed an Exalt link for city of Midland PD. They had several diplexers extra due to mix up. Not sure if they kept them...we left them with head of IT at main court house building. Long shot... Jaime Solorza On Jun 27, 2017 6:54 PM, "Adair Winter"

[AFMUG] Exalt Diplexers

I'm looking for a set of Band 1 diplexers for Exalt ExtendAir G2. Anyone have any they want to sell? -- Adair Winter VP, Network Operations / Co-Owner Amarillo Wireless | 806.316.5071 C: 806.231.7180 http://www.amarillowireless.net

Re: [AFMUG] Exalt ExtremeAir

You did check xmt power, right? Accounting for any adaptive modulation/power. From: Sam Lambie Sent: Tuesday, December 08, 2015 4:43 PM To: af@afmug.com Subject: Re: [AFMUG] Exalt ExtremeAir multipath or on a side lobe. did you peak the signals in all 4 directions? On Tue, Dec 8, 2015 at 3

Re: [AFMUG] Exalt ExtremeAir

modulation/power. *From:* Sam Lambie <mailto:samtaos...@gmail.com> *Sent:* Tuesday, December 08, 2015 4:43 PM *To:* af@afmug.com <mailto:af@afmug.com> *Subject:* Re: [AFMUG] Exalt ExtremeAir multipath or on a side lobe. did you peak the signals in all 4 directions? On Tue, Dec

Re: [AFMUG] Exalt ExtremeAir

5 4:43 PM > To: af@afmug.com > Subject: Re: [AFMUG] Exalt ExtremeAir > > multipath or on a side lobe. did you peak the signals in all 4 directions? > > > On Tue, Dec 8, 2015 at 3:24 PM, Dan Petermann <d...@wyoming.com> wrote: > We are installing a pair of ExtremeAir rad

Re: [AFMUG] Exalt ExtremeAir

multipath or on a side lobe. did you peak the signals in all 4 directions? On Tue, Dec 8, 2015 at 3:24 PM, Dan Petermann wrote: > We are installing a pair of ExtremeAir radios and are having an odd issue. > > At one end the rx is -41V / -31H. > > The far end the rx is -35V /

Re: [AFMUG] Exalt ExtremeAir

Lambie <samtaos...@gmail.com> > *Sent:* Tuesday, December 08, 2015 4:43 PM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] Exalt ExtremeAir > > multipath or on a side lobe. did you peak the signals in all 4 directions? > > > On Tue, Dec 8, 2015 at 3:24 PM, Dan Peterma

Re: [AFMUG] Exalt ExtremeAir

ve >>> modulation/power. >>> � >>> From: Sam Lambie >>> Sent: Tuesday, December 08, 2015 4:43 PM >>> To: af@afmug.com >>> Subject: Re: [AFMUG] Exalt ExtremeAir >>> � >>> multipath or on a side lobe. did you peak the si

[AFMUG] Exalt ExtremeAir

We are installing a pair of ExtremeAir radios and are having an odd issue. At one end the rx is -41V / -31H. The far end the rx is -35V / -32H. Any idea what could cause a 10dB difference in polarizations?

[AFMUG] Exalt ExtendAir G2 issues?

For those of you that have had issues with the ExtendAir G2, what exactly were your problems? I have a new 11GHz link that randomly sees the BER go high in both directions and it drops out. RSL at both ends is normal during this. It looks like multipath or interference, but a reboot clears it

Re: [AFMUG] Exalt ExtendAir G2 issues?

Turns out I was wrong. The high side RSL drops to -99. So it looks like the low side Tx is stalling and a reboot of that end only will resolve it for a while. Guess we'll be replacing the low end. On 10/7/2015 1:33 AM, George Skorup wrote: For those of you that have had issues with the

Re: [AFMUG] Exalt part 2

: [AFMUG] Exalt part 2 What would be ironic is if Cambium is going to announce at Wispalooza that they bought Exalt. From: Eric Kuhnke via Afmailto:af@afmug.com Sent: Tuesday, September 23, 2014 8:32 AM To: af@afmug.commailto:af@afmug.com Subject: Re: [AFMUG] Exalt part 2 I don't think Cambium cares

Re: [AFMUG] Exalt

– 10/1 – Free pass below Winncom Booth #4046 https://www.tradeshowregistrar.com/regsystem18/?event=ASIS2014brand=EB-456 From: Af [mailto:af-bounces+d.lorenz=winncom@afmug.com] On Behalf Of Ken Hohhof via Af Sent: Tuesday, September 23, 2014 8:08 PM To: af@afmug.com Subject: Re: [AFMUG] Exalt

Re: [AFMUG] Exalt part 2

javascript:_e(%7B%7D,'cvml','winncom@afmug.com');] *On Behalf Of *Ken Hohhof via Af *Sent:* Tuesday, September 23, 2014 10:16 AM *To:* af@afmug.com javascript:_e(%7B%7D,'cvml','af@afmug.com'); *Subject:* Re: [AFMUG] Exalt part 2 What would be ironic is if Cambium is going to announce

Re: [AFMUG] Exalt part 2

it. Maybe we’ll read about it in Light Reading. From: Jason McKemie via Af Sent: Wednesday, September 24, 2014 3:34 PM To: af@afmug.com Subject: Re: [AFMUG] Exalt part 2 Now if they would just start putting an optical interface on their entry level radios... On Wednesday, September 24, 2014

Re: [AFMUG] Exalt part 2

:* Re: [AFMUG] Exalt part 2 This is scary, I hope they're just reorganizing, not really closed - not good to lose competition. Their licensed radios looked really good, and the unlicensed, while quite 'dumb' RF-wise, were solidly built. -- *From: *Eric Kuhnke via Af

Re: [AFMUG] Exalt part 2

*To:* af@afmug.com mailto:af@afmug.com *Subject:* Re: [AFMUG] Exalt part 2 This is scary, I hope they're just reorganizing, not really closed - not good to lose competition. Their licensed radios looked really good, and the unlicensed, while quite 'dumb

Re: [AFMUG] Exalt part 2

with a show or something. If so, that seems to be backfiring. Maybe they use the same PR consultant as the NFL. *From:* cstanners--- via Af af@afmug.com *Sent:* Monday, September 22, 2014 8:43 PM *To:* af@afmug.com *Subject:* Re: [AFMUG] Exalt part 2 This is scary, I hope they're just

Re: [AFMUG] Exalt part 2

What would be ironic is if Cambium is going to announce at Wispalooza that they bought Exalt. From: Eric Kuhnke via Af Sent: Tuesday, September 23, 2014 8:32 AM To: af@afmug.com Subject: Re: [AFMUG] Exalt part 2 I don't think Cambium cares, the PTP800 and PTP810 are marketed so heavily

Re: [AFMUG] Exalt

. From: SmarterBroadband via Af Sent: Tuesday, September 23, 2014 6:40 PM To: af@afmug.com Subject: [AFMUG] Exalt I had contact with Exalt today. I was told there should be a statement from Senior Management shortly. Maybe if new ownership and re-organization, could be for the better? Adam

Re: [AFMUG] Exalt part 2

Yeah, when I want to know the real facts, I always look to Light Reading. There is nothing new in this article. We still know pretty much zilch. From: Eric Kuhnke via Af Sent: Monday, September 22, 2014 7:53 PM To: af@afmug.com Subject: [AFMUG] Exalt part 2 http://www.lightreading.com

Re: [AFMUG] Exalt part 2

to be backfiring. Maybe they use the same PR consultant as the NFL. *From:* cstanners--- via Af mailto:af@afmug.com *Sent:* Monday, September 22, 2014 8:43 PM *To:* af@afmug.com mailto:af@afmug.com *Subject:* Re: [AFMUG] Exalt part 2 This is scary, I hope they're just reorganizing, not really closed

Re: [AFMUG] Exalt part 2

. Maybe they use the same PR consultant as the NFL. *From:* cstanners--- via Af af@afmug.com *Sent:* Monday, September 22, 2014 8:43 PM *To:* af@afmug.com *Subject:* Re: [AFMUG] Exalt part 2 This is scary, I hope they're just reorganizing, not really closed - not good to lose competition

Re: [AFMUG] Exalt?

Our Winncom rep says they have been in contact with Exalt and is business as normal. On Fri, Sep 19, 2014 at 5:11 PM, Matt Jenkins via Af af@afmug.com wrote: Tried calling and leaving messages. No response. Emailed multiple contacts. No response. They have been repairing a radio for 2 months.

Re: [AFMUG] Exalt?

Holy crap, I nearly bought a link last month… On Sep 18, 2014, at 8:03 PM, Josh Baird via Af af@afmug.com wrote: So were they just dumping inventory with the recent G2 promotions? Sent from my iPhone On Sep 18, 2014, at 7:59 PM, Jose Burgos via Af af@afmug.com wrote: Yes, I heard that

Re: [AFMUG] Exalt?

Just call them Jaime Solorza On Sep 19, 2014 3:16 PM, Josh Reynolds via Af af@afmug.com wrote: Not sure there is validity to this claim. References please? Pics of the for sale sign on the offices? :) Maybe a press release? Josh Reynolds, Chief Information Officer SPITwSPOTS,

Re: [AFMUG] Exalt?

Tried calling and leaving messages. No response. Emailed multiple contacts. No response. They have been repairing a radio for 2 months. Supposed to have taken less than 30 days to turn it around. We are expanding and need that link back operational. The backup is not fast enough for the demand

Re: [AFMUG] Exalt?

What about stock? Support for existing clients? Jaime Solorza On Sep 18, 2014 6:59 PM, Jose Burgos via Af af@afmug.com wrote: Yes, I heard that they closed their doors two (2) days ago. Sent from Jose's iPhone - Pinnacle Wireless On Sep 18, 2014, at 8:57 PM, Matt Jenkins via Af

Re: [AFMUG] Exalt?

So were they just dumping inventory with the recent G2 promotions? Sent from my iPhone On Sep 18, 2014, at 7:59 PM, Jose Burgos via Af af@afmug.com wrote: Yes, I heard that they closed their doors two (2) days ago. Sent from Jose's iPhone - Pinnacle Wireless On Sep 18, 2014, at 8:57