[Alsa-user] Re: delta 44 / alsa [update]

> Just got my Delta 44. The modules seem to be loaded fine, and alsamixer is > able to set and tweak the settings on the card. Unfortunately, none of my > mixers nor Audacity can see the Delta 44. Can somebody give me a nudge > about how to get going with this card? How do I tell Audacity which

[Alsa-user] delta 44 / alsa

Hello All Just got my Delta 44. The modules seem to be loaded fine, and alsamixer is able to set and tweak the settings on the card. Unfortunately, none of my mixers nor Audacity can see the Delta 44. Can somebody give me a nudge about how to get going with this card? How do I tell Audacity whi

[Alsa-user] Crystal cs4281

Hello all, Im having some problems loading drivers for my cs4281 audio card. I keep recieving "init_module: no device found" But it shows up on an lspci dump. Below is my logs and outputs. Thanks for any help, -Bill < snip logs > Memory BAT mapping: BAT2=256Mb, BAT3=0Mb, residual: 0Mb Total

Re: [Alsa-user] asm/irq_vectors.h

On 02/28/03 11:41 Takashi Iwai spoke thusly At Thu, 27 Feb 2003 19:50:15 -0500, Bob Lockie wrote: I got kernel 2.5.62 and I'm trying to build ALSA but I'm having a problem. What kernel option to I need to have so that asm/irq_vectors.h is created? /lib/modules/2.5.62/build/include/asm/irq.h:16: ir

Re: [Alsa-user] Joystick and SB 16

On Friday 28 Feb 2003 19:05, Erik Lotspeich wrote: > I have Alsa successfully working with a SB 16 (ES1371) sound card. I > cannot get the joystick support to work at all. Is there some trick to > this? There is a trick to it :) You need to enable the joystick port before loading the ns558 driv

Re: [Alsa-user] can I remap 'default' device to use a plugin?

On Fri, 2003-02-28 at 12:35, Jaroslav Kysela wrote: > On Fri, 28 Feb 2003, Brad Hilton wrote: > > > Jaroslav Kysela wrote: > > > On 27 Feb 2003, Brad Hilton wrote: > > >>Can someone tell me if it's possible to remap the 'default' alsa device > > >>to actually use a plugin? > > >> > > > ===

Re: [Alsa-user] can I remap 'default' device to use a plugin?

On Fri, 28 Feb 2003, Brad Hilton wrote: > Jaroslav Kysela wrote: > > On 27 Feb 2003, Brad Hilton wrote: > >>Can someone tell me if it's possible to remap the 'default' alsa device > >>to actually use a plugin? > >> > > == CUT HERE === > > # override pcm.default definition f

Re: [Alsa-user] No mixer elements found

yep, i have a m-audio quattro too... was a bit puzzled by this until it was explained to me that there *arent* any mixer elements on the quattro... its designed for use with a mixing desk... you can change output volumes in apps like ardour, of course... but this is *rendered* output of a mix...

[Alsa-user] Joystick and SB 16

Hi, I've seen a number of people asking questions about joystick support on soundcards and Alsa. I haven't seen a number of answers. If this has been answered before, pardon my ignorance. I have Alsa successfully working with a SB 16 (ES1371) sound card. I cannot get the joystick support to wo

Re: [Alsa-user] Soundblaster 16 installation

lsmod returns the following sound related modules, so it seems they are all installed: Module Size Used byNot tainted snd-seq-oss29984 0 (unused) snd-seq-midi-event 5312 0 [snd-seq-oss] snd-seq52048 0 [snd-seq-oss snd-seq-midi-event] sn

[Alsa-user] Audiophile 2496 (ice1712) and AC3 Passthru

Hi all, Has anyone had any luck with getting the AC3 passthru to work with this card/chipset? I notice in the code for 0.9.0rc3 / 0.9.0rc7 ice1712.c this notice which leads me to believe this still doesn't work: NOTES: - spdif nonaudio consumer mode does not work (at least with my Sony STR

Re: [Alsa-user] Soundblaster 16 installation

On Fri, 28 Feb 2003, Andrew Jones wrote: > Subject: [Alsa-user] Soundblaster 16 installation > > Hi, I'm running Redhat 7.3 and am attempting to install a Sound Blaster > 16 PCI. I've followed the instructions step by step on the > documentation page for the Soundblaster 16 PCI: > http://www.al

[Alsa-user] Soundblaster 16 installation

Hi, I'm running Redhat 7.3 and am attempting to install a Sound Blaster 16 PCI. I've followed the instructions step by step on the documentation page for the Soundblaster 16 PCI: http://www.alsa-project.org/alsa-doc/doc-php/template.php3?company=Creative+Labs&card=Soundblaster+16+PCI&chip=ES1373

Re: [Alsa-user] emagic amt8

[EMAIL PROTECTED] wrote: > has anybody used the emagic amt8 midiinterface with alsa? , but that looks rather old. The information about port switching with F5 xx may indicate that ALSA's standard serial driver may work. Apparently, the USB connectio

Re: [Alsa-user] can I remap 'default' device to use a plugin?

Jaroslav Kysela wrote: On 27 Feb 2003, Brad Hilton wrote: Can someone tell me if it's possible to remap the 'default' alsa device to actually use a plugin? == CUT HERE === # override pcm.default definition from /usr/share/alsa/alsa.conf pcm.!default { type plug

Re: [Alsa-user] Compiling ardour: configure can't find jack.pc

At Thu, 27 Feb 2003 08:59:53 -1000, Joel Roth wrote: > > Hi ardour users, wrong list :) > > I have upgraded my debian installation to 'unstable' to get the > software versions needed for compiling ardour. > > But the configure script fails at the end with a message > like: > > jack.pc

Re: [Alsa-user] asm/irq_vectors.h

At Thu, 27 Feb 2003 19:50:15 -0500, Bob Lockie wrote: > > I got kernel 2.5.62 and I'm trying to build ALSA but I'm having a problem. > What kernel option to I need to have so that asm/irq_vectors.h is created? > > > /lib/modules/2.5.62/build/include/asm/irq.h:16: irq_vectors.h: No such > file o

Re: [Alsa-user] Delta 1010lt

At Fri, 28 Feb 2003 14:48:11 +1100, John Mifsud wrote: > > > Hello again Alsa list. I am new to Alsa so I beg your patience and > forgivness for the bandwidth sucking email . (thanks Martin, I replied to > you off list) > > I've been building a D.A.W using a Delta 1010Lt card which, using the >

[Alsa-user] No mixer elements found

Hi all, I'm using a M-Audio quattro and I have my system set up so that I can record and hear audio. However, alsamixer reports I have "No mixer elements found." I've configured my system according to the instructions on the alsa page, including the .asoundrc files and such. Any ideas why I

Re: [Alsa-user] No sound on the analog output with Asus P4PE/AD1980

Hello, sorry for the trouble : it's all my fault : too much cable between the computer and the amplifier... I have cross two cables. Now, all is ok. Thanks for the help, and one more time, sorry for the trouble. Olivier -- Olivier Bornet | français : http:/

Re: [Alsa-user] No sound on the analog output with Asus P4PE/AD1980

Hi again, > this will be created when you run "alsactl store" (as root). > usually it's called from alsasound init script. OK. I don't have see the initscript. I have now run it, and the asound.state is attached. But, no change: always no sound on analog output. Olivier -- Oliv

[Alsa-user] Re: [Alsa-devel] [lack of] dynamic detection/loading of modules

At 27 Feb 2003 12:35:00 -0800, Fernando Pablo Lopez-Lezcano wrote: > > > >lists about this and to do it cleanly it would be nice to have available > > >in /proc/asound the list of modules currently loaded. That is not > > >available today (I think Takashi said he might add that)." > > > > cat /pr

Re: [Alsa-user] No sound on the analog output with Asus P4PE/AD1980

Hi, > please give /etc/asound.state for check. Heu... I don't have /etc/asound.state (neither /usr/local/etc/asound.state). Olivier -- Olivier Bornet | français : http://puck.ch/f Swiss Ice Hockey Results | english : http://puck.ch/e http://puck.ch/

Re: [Alsa-user] No sound on the analog output with Asus P4PE/AD1980

At Fri, 28 Feb 2003 15:46:59 +0100, Olivier Bornet wrote: > > [1 ] > Hi, > > > please give /etc/asound.state for check. > > Heu... I don't have /etc/asound.state (neither > /usr/local/etc/asound.state). this will be created when you run "alsactl store" (as root). usually it's called from alsas

Re: [Alsa-user] No sound on the analog output with Asus P4PE/AD1980

At Fri, 28 Feb 2003 15:40:48 +0100, Olivier Bornet wrote: > > [1 ] > Hi Richard, > > > make sure you use alsamixer for that. I had a similar problem with my card and > > I really unmuted all channels with kmix. The problem was, kmix didn't display > > the DAC and ADC sliders and my DAC was set

Re: [Alsa-user] isapnp on 2.2 kernel

At Fri, 28 Feb 2003 16:18:08 +0200, Andrei Boros wrote: > > > alsa-driver-0.9.0rc7 and stock kernel 2.2.23 (www.kernel.org) > > ./configure --with-isapnp=yes will say : > checking for ISA PnP driver in kernel... no > checking for ISA PnP support... yes > > However, in Makefile.conf I get thes

Re: [Alsa-user] No sound on the analog output with Asus P4PE/AD1980

Hi Richard, > make sure you use alsamixer for that. I had a similar problem with my card and > I really unmuted all channels with kmix. The problem was, kmix didn't display > the DAC and ADC sliders and my DAC was set to minimum, too. Yes, I use alsamixer, but I don't have see ADC and DAC slide

Re: [Alsa-user] No sound on the analog output with Asus P4PE/AD1980

Hi Takashi, > at first, check whether you really unmuted and adjustted the Master > and PCM playback volumes. Yes : Master and PCM are unmuted and at almost max level (90%). I have also put all the other volumes to 90% to be sure. For one entry, I'm not sure: , which can be either "AC-Link" or "A

Re: [Alsa-user] No sound on the analog output with Asus P4PE/AD1980

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Just an additional note, make sure you use alsamixer for that. I had a similar problem with my card and I really unmuted all channels with kmix. The problem was, kmix didn't display the DAC and ADC sliders and my DAC was set to minimum, too. On Fr

[Alsa-user] emagic amt8

hi has anybody used the emagic amt8 midiinterface with alsa? best regards sebastian --- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf ___ Alsa-user mai

[Alsa-user] playing sound shuts off computer

i am using alsa v0.9rc7 and kernel v2.4.20. My soundcard is Gravis Ultrasound PnP, alsa driver is interwave. When I try to play a sound (either using aplay, xmms or mplayer), it works for a while, and then the computer locks up and seems to power down. The graphic card stops sending signal, disc

Re: [Alsa-user] No sound on the analog output with Asus P4PE/AD1980

At Fri, 28 Feb 2003 14:49:18 +0100, Olivier Bornet wrote: > > [1 ] > Hello, > > I'm trying to use the onboard AD1980 of my new P4PE asus mainboard. I > have downloaded the asus drivers from the CVS, as it seems some change > was done no the AD1980 since the last tarball. > > I can load necessar

[Alsa-user] isapnp on 2.2 kernel

alsa-driver-0.9.0rc7 and stock kernel 2.2.23 (www.kernel.org) ./configure --with-isapnp=yes will say : checking for ISA PnP driver in kernel... no checking for ISA PnP support... yes However, in Makefile.conf I get these: CONFIG_ISAPNP_KERNEL= CONFIG_ISAPNP = y consequently th

[Alsa-user] No sound on the analog output with Asus P4PE/AD1980

Hello, I'm trying to use the onboard AD1980 of my new P4PE asus mainboard. I have downloaded the asus drivers from the CVS, as it seems some change was done no the AD1980 since the last tarball. I can load necessary modules, but I have no sound at all. I have try with madplay, xmms and ogle. I'm

Re: [Alsa-user] can I remap 'default' device to use a plugin?

On 27 Feb 2003, Brad Hilton wrote: > Hello, > > Can someone tell me if it's possible to remap the 'default' alsa device > to actually use a plugin? > > I am trying to experiment with the new dmix plugin, and would like to > make all of my alsa audio apps use it by default. Unfortunately, I > ha