Hallo,
Hiram Abiff hat gesagt: // Hiram Abiff wrote:
Thnx for the tip, will try this. But, no matter which index the
Maya gets I always have this same issue that I described earlier,
cannot get it to play anything.
Yes, and I still have no idea, why it doesn't let you play anything,
not even
Hiram Abiff wrote:
My problem is I can't get my Maya to play any sound from
Alsa.
ALSA: cannot set hardware parameters for playback
Please show the contents of /proc/asound/cardX/stream0.
Regards,
Clemens
---
This SF.Net email is
On Fri, 2006-03-10 at 18:30 +0100, Clemens Ladisch wrote:
Davide Fossati wrote:
I updgraded the kernel (and everything else in the system). Now I'm
running 2.6.15-1.1833. Unfortunately, nothing changed.
You need at least 2.6.15.2.
HTH
Clemens
Hi,
I downloaded kernel 2.6.15.6 and
Davide Fossati wrote:
On Fri, 2006-03-10 at 18:30 +0100, Clemens Ladisch wrote:
Davide Fossati wrote:
I updgraded the kernel (and everything else in the system). Now I'm
running 2.6.15-1.1833. Unfortunately, nothing changed.
You need at least 2.6.15.2.
I downloaded kernel 2.6.15.6
Quoting Clemens Ladisch [EMAIL PROTECTED]:
Hiram Abiff wrote:
My problem is I can't get my Maya to play any sound from
Alsa.
ALSA: cannot set hardware parameters for playback
Please show the contents of /proc/asound/cardX/stream0.
hi, clemens.
here goes:
AUDIOTRAK MAYA44 USB at
On Sun, 12 Mar 2006, Lee Revell wrote:
On Mon, 2006-03-13 at 00:42 +0100, Guennadi Liakhovetski wrote:
Well, _this_ difference everybody would here, but, well...
I guess you are referring to recording with the OSS driver, as you said
that capture with ALSA is unusable with this device?
Quoting Lee Revell [EMAIL PROTECTED]:
Would deactivating
bandwidht checking work for me too, then?
Error -38 is not the same as error -28. If you have bandwidth checking
enabled then certainly disable it (it's well known that it's broken).
I see.
Is this device connected through a hub?
Hi folks,
I am experiencing problems with the onboard-soundchip on my Asus A8V
mainboard. The chip is a VIA8237 with 5.1 capabilities.
I used this chip all the time, and recently I finally bought a 5.1 speaker-set
to enjoy DVDs with thrilling sound. Anyway: I connected the speaker-system to
alsamixer -c 2 -V capture but it says No mixer elems found.
When I run alsamixer -c 2 I get 3 sliders for playback, although
Maya has 2 stereo outputs???!! I discovered that the third actually
controls one of the input channels, but driving it to 100 still produces low
volume audio. When I use
Quoting Lee Revell [EMAIL PROTECTED]:
For some reason I see 3 Speaker entries only in the playback section
and no capture entries.
Many USB audio devices don't have (much of) a software controllable
mixer, the only mixer is controlled by the knobs on the device.
Lee
Unfortunately, this
On Mon, 2006-03-13 at 20:53 +0100, Hiram Abiff wrote:
alsamixer -c 2 -V capture but it says No mixer elems found.
When I run alsamixer -c 2 I get 3 sliders for playback, although
Maya has 2 stereo outputs???!! I discovered that the third actually
controls one of the input channels, but
Quoting Lee Revell [EMAIL PROTECTED]:
On Mon, 2006-03-13 at 20:41 +0100, Hiram Abiff wrote:
I can get output from muse no prob and from other music making apps.
I tried running xmms but it complains and cannot start:
Input has 2 channels, soundcard uses 4 channels
No conversion is available
Hi folks!
I have a headset with line-out and line-in audio jacks. Since the female
line-in doesn't work anymore, I wanted to use this headset over USB. Can
I use the standard 'usb-audio' kernel module for this going to work?
(I'm only asking because such an adaptor is not cheap enough for me, if
On Mon, 2006-03-13 at 20:41 +0100, Hiram Abiff wrote:
I can get output from muse no prob and from other music making apps.
I tried running xmms but it complains and cannot start:
Input has 2 channels, soundcard uses 4 channels
No conversion is available
XMMS bug, it wants to use the hw:x
I checkveed dmesg, this message appears after each aplay's
unsuccesful attempt:
cannot submit datapipe for urb 0, err = -38
What is this urb 0?
I found this in the LAU archive from , pertaining
to this error message:
ALSA: could not start playback (Broken pipe)
kernel: cannot submit
On Mon, 2006-03-13 at 16:41 +0100, Clemens Ladisch wrote:
Davide Fossati wrote:
On Fri, 2006-03-10 at 18:30 +0100, Clemens Ladisch wrote:
Davide Fossati wrote:
I updgraded the kernel (and everything else in the system). Now I'm
running 2.6.15-1.1833. Unfortunately, nothing changed.
On Mon, 2006-03-13 at 16:39 -0600, Davide Fossati wrote:
I tried with a short (10 ms) wave file. It hangs forever.
Does anything appear in the output of dmesg when you try this?
Lee
---
This SF.Net email is sponsored by xPML, a
Davide Fossati wrote:
On Mon, 2006-03-13 at 16:41 +0100, Clemens Ladisch wrote:
When you try to play a short file, will it play nothing for a short
time, or will it hand forever?
I tried with a short (10 ms) wave file. It hangs forever.
ALSA should automatically abort when nothing happens
Fabiano Sidler wrote:
I have a headset with line-out and line-in audio jacks. Since the female
line-in doesn't work anymore, I wanted to use this headset over USB. Can
I use the standard 'usb-audio' kernel module for this going to work?
No, because such a module does not exist. ;-)
The
19 matches
Mail list logo