phone, will the different
lines flash when there is an incoming call? If so, how is this
configured/controlled in asterisk? Just trying to figure this stuff out.
Any suggestions or help would be greatly appreciated. Thanks again
asterisk!
Jonathan Miller
___
check out:
http://www.voip-info.org/wiki-Asterisk+phones
At 12:23 AM 10/15/2004 -0700, you wrote:
Hi,
After reading up on the Asterisk, I have a
question:
1. Is there a software phone running on PC as a client that
is compatible with Asterisk?
My reason for asking is that I wonder if I can
Another solution would be to keep the discussions on topic and open up a
separate mailing list for people interested in open discussions.
Jonathan
At 07:17 PM 9/26/2004 +0100, you wrote:
I was somewhat concerned reading Mark's posting earlier today.
Obviously, things are very bad in the
Not the cheapest ($75-80) but they look interesting.
http://ipphone.eezeephone.com/
Jonathan
At 03:10 PM 9/26/2004 -0300, you wrote:
On Sun, 26 Sep 2004 19:04:38 +0100, Paul Tyreman <[EMAIL PROTECTED]> wrote:
> Hi guys,
>
> I know this isn't strictly about Asterisk, but it is
Asterisk on an SMP system. I cannot find that info now and most of the
reading seems to indicate that SMP stability is good. Does anyone know of
the warning I read?
Thank you.
Jonathan Augenstine
[EMAIL PROTECTED]
___
Asterisk-Users mailing list
[EMAIL
duplicate the
problem by using my configs. So there is at least some awareness at Uniden that
people are using this on *.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Quoting Ryan Courtnage <[EMAIL PROTECTED]>:
> J
ioning the feature.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Quoting Noah Miller <[EMAIL PROTECTED]>:
> Hi -
>
> I'm wondering if any has experience with the Uniden UIP-200 phones.
> The product info says
hered with having call waiting buzz in my ear is there a way to configure
asterisk to make this happen?
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Visit Winfield Public Schools at http://usd46
Hi,
Has anyone had any experience of doing supervised transfers with an
IPDialog SipToneII SIP phone and asterisk?
When The phone sends the REFER message asterisk errors with a message
saying it canot find the call referenced by the Replaces Header.
Thank you.
Jonathan
7;t
find capi device with outgoing msn = 01824708169. you should check
your config!
I have "${CALLERIDNUM}" so my SIP phones are mapped to DDI's. This
avoids having to have an msn entry for every phone with a DDI.
Thanks
Jonathan
Original Message
==> From: &
angup
My sip.conf is:
[general]
context=default
autocreatepeer=yes
localnet=192.168.1.162
port=5062
bindaddr=0.0.0.0
rtptimeout=60
rtpholdtimeout=300
useragent=PBX Gateway
[sip_proxy]
context=SIP
type=peer
Host=192.168.1.162
Thanks and best regards.
Hi Roland,
Nothing on that message helps me unfortunately. I can make calls
from
SIP to ISDN I just can't get call transfer to work.
Regards, Jonathan
Original Message
==> From: "Roland Zagler" <[EMAIL PROTECTED]>
==> Date: Tue, 10 Aug 2004 12:2
No I'm on kernal 2.4.22 Fedora core 1.
Thanks, Jonathan
Original Message
==> From: "Roland Zagler" <[EMAIL PROTECTED]>
==> Date: Tue, 10 Aug 2004 11:48:17 0200
Are you using kernel 2.6.x ?
Roland Zagler mailto:[EMAIL PROTECTED]
-Origina
Thanks for your reply Roland, unfortunately adding the 'b' didn't
make
any diference.
Regards.
Jonathan
Original Message
==> From: "Roland Zagler" <[EMAIL PROTECTED]>
==> Date: Tue, 10 Aug 2004 11:18:32 0200
Try specifying your numb
at it chan_capi can't find
an
entry for the outgoing msn for the transfer however the outgoing msn
is the same as that used to make the original call.
Has anyone got any ideas please?
The asterisk trace and my capi.conf are below:
Thank you. Best regards.
Jonathan
-- Executing Dial("SI
I don't know of a program for doing this, but then again I have never looked for
one :-). I wonder if a sipura or an iaxy would do the job though.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Quoting Jon Creasey <[EMAIL P
I saw the same problem on a customer install and because of short time frame we
wiped system and moved over to Fedora, since we already has tested and used it
in the past.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Quoting Sergio
earch and it looks like you are correct about the 3com single line
injectors, which does indeed explain the price differential.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Quoting Greg Hill <[EMAIL PROTECTED]>:
> On Mon, 19 Jul
be had for between $16-$25. I have done some minimal testing with one
for use with wireless access points and it seems workable, although not a good
solution for a high density environment.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Just to add some info to this, Hope it will help
I had a similar problem when first testing my * setup.
I was testing it with an active dual line phone line
(all four wires active) and for some reason the X100P
did not like that at all.
Easiest way is to make sure your line from the jack is
just
with wep off just to
rule that out as an issue.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Quoting Terje Christensen <[EMAIL PROTECTED]>:
> Hi all
> I have just got a P2000w and experience several problems. Hopefu
this code? Is anyone using
this feature successfully?
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Visit Winfield Public Schools at http://usd465.com
-
This mail sent through IMP: http://hord
connecting to a 0.9.1 box.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Quoting "Timothy R. McKee" <[EMAIL PROTECTED]>:
> Ours works fine with the WRT54G with
ought the phone was
defective because it was so intermetent. We had similar if not identical
problems with the wisips working better with better quality APs. Seems to work
great with wap11s in our testing.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.510
to use the 3-way feature on the line? We have
tried the *0 on the dialpaid but it doesn't seem to work. Is there a setting
somewhere to activate *0 or is there some other way to accomplish this?
Thanks in advance.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221
with greater than 1000
manager accesses per day?
Looking forward to see your program.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Quoting Kyle Hagan <[EMAIL PROTECTED]>:
> To all that are interested Im hoping to have a beta
. I attended one a while back. Would
have been really great, if I had never configured one before.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Quoting Jon Brandon <[EMAIL PROTECTED]>:
> I am trying to find a manual for th
ecessarily recommending but there are custom firmware images (since they run
Linux) that provide QOS, I think there may even be an image with a builtin SIP
proxy.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Quoting James Moran <[EM
uestion here is what is the necessary density per AP?
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Quoting Andrew Kohlsmith <[EMAIL PROTECTED]>:
> > > We need to have about 30 phones on one floor
>
> > And you r
Lots of responses, but here is my 2 Cents of what
works well for me
Downloaded my local NPA/NXX combinations from
following web site.
http://members.dandy.net/~czg/search.html
Added them to the internal Asterisk DB with DB put
So when an outbound call comes, I strip off the
NPA, NXX, do a look
Had a similar problem
What kind of phone are you using on that line?
My case, the line was sharing a Palm modem on it.
Electrical noise from the power strip was causing the
problem.
Also when My cell phone was too close to the phone,
same problem
Also found the VMWI logic was not working well w
fact that this phone supports
vibrate ring and progresive volume increase was impressive to me for a rev 1 model.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Quoting Andrew Kohlsmith <[EMAIL PROTECTED]>:
> > Something you sh
is the Wisip wireless 802.11b
phone from Pulver. We are looking at this to help reduce cellular costs and also
as a possible teacher phone.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Quoting Chris Hobbs <[EMAIL PROTECTED]>:
Glad to hear that is working,
Sorry to hear that you'll have to stand
next to the server and give it that static shock
everytime you want to get a fax.
Don't feel bad.. I spent 5 hours diagnosing why
mine would not work before I realized that
* had to answer the stinking line to hear the
fax ton
exten => fax,1,Dial(SIP/ata4fax) ; [1]
Faxing via SIP? Does that even work?
Faxing works for me but it is via ZAP.
I do get the messages Fax detected redirecting
to Fax extension. Which you should get irregardless
of SIP.
How are you testing this. Asterisk listens for the
Fax Tone, I see you
gt; put
> > a "d" in the extension? Right now I have this:
> >
> > exten => fax,1,Dial(Zap/8)
> >
> > and I'm envisioning changing it to
> >
> > exten => fax,1,Dial(Zap/8/d${EXTEN})
> >
> > Is that right?
> >
> > -
Have a HP Officejet combo working OK with inbound fax
detection, receiving faxes, and sending them
using X100p and TDM400P, I just make sure I use the
"d" option on the dial string, for outbound and also
inbound on the FAX detection.
have the "d" option on the internal fax redirection,
and have set
I have seen conflicting references in regard to this. Seems like the Cisco site
has comparison charts that show this phone doesn't have a SIP image, but after
seeing the post I did a little searching and people seem to have a way of
running SIP on them. So how is it done?
--
Jonathan
s our first official customer.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Quoting Andrew Gillham <[EMAIL PROTECTED]>:
> Jonathan Moore wrote:
>
> >I have a client that would like to purchase 12 IP phones for an office
t has built way beyond the
basics of this principal to some very polished functionality.
Thanks for making this available. Great contribution.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Quoting mattf <[EMAIL PROTECTED]>:
> Thank
I believe these are skinny only models. Have you had luck with them in an *
environment?
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Quoting Leo Ann Boon <[EMAIL PROTECTED]>:
> try the cisco 7905 or 7912, large screen and
ld be paired with an analog to IP converter?
Total package (IP phone and powewr supply or analog phone + converter) should
probably cost no more than the Snom 220 at about $325-$350 per unit.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Been using VoicePulse connect service for bout 2
months now.
Got outbound calling working via IAX2 very quickly.
Call Quality-Great.
Flexibility with Connect Service - Great
Ordered DID. Was not working initially but they fixed
it. Total order time, about 6 Days.
Reliability - Lets just say its
Just to update on previous System Freeze messages.
My system has now run longer than ever before. Is the
problem gone? Only time will tell, however, I found
out someting interesting that may help others during
research into this problem.
System RH 9 SMP Dual Pentium III
In following the bug repo
NOt sure if there is an official download site, but I just recieved a copy of
the updated firmware from pulver. I can send it to you if you like. I have
emailed back asking for instructions on how to load.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax
Found this link from a google search
http://www.dairiten.com/webiax/
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Quoting [EMAIL PROTECTED]:
> You may be right here. I was thinking of an ActiveX plug-in. I don't expect
>
conferening phone module I am looking at using and analog Polycom
SoundStation with a sipura IP converter.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Quoting Steve <[EMAIL PROTECTED]>:
> On Wednesday 25 February 2004 08:26
gt; [EMAIL PROTECTED]
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>http://lists.digium.com/mailman/listinfo/asterisk-users
>
--
Jonathan Moore
Technology Coordinator
Winfield Public Schools
Office 316-221-5100
Fax 316-
Below
Quoting Yifang Dai <[EMAIL PROTECTED]>:
> On Tue, Feb 17, 2004 at 11:30:09PM -0600, Jonathan Moore wrote:
> > See below
> >
> > Actually you can control the volume while in call with the four way toggle
> > button in the center of the phone. Right for lo
OK, I think I was wrong on the Grandstream. I loaded up the web config and I am
not seeing the option. I would suggest contacting them directly to see. If not
that I am pretty sure the snom100 has an auto answer mode.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office
There is an email contact in the order form area. I have had very good luck with
emailing her and having questions answered about availability.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Quoting "Jason T. Nelson" <[EM
I think the Grandstream Budgetone has an auto answer option. Not sure how good
the mic pickup is, but you could probably wire in a better mic cheap and that
would only run you about $65 plus shipping.
Happy monitoring.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office
What about a phone, analog or IP, put in an auto answer mode?
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Quoting "Jamin W. Collins" <[EMAIL PROTECTED]>:
> Do any of you know of a cost effect device that could
See below
--
Quoting Yifang Dai <[EMAIL PROTECTED]>:
> >
> > When you get it going please compare notes on functionality. So far I am
> finding
>
> Mine appears to be working fine..
>
> > the Wisip likes my brand new Cisco AP1100 a lot more than either an airport
> or
> > linksys ap. This cou
I think I have seen something similar. I can't get my diax to reliably answer.
It will answer after it first registers (mostly). But it is overall very
intermitent in answering. Again even though it shows being registered and I can
make outbound calls.
--
Jonathan Moore
Director of Techn
isco and everything running, and the phone placed
correctly against my ear I had one really clear 20 minute call with the unit
while I roamed around the building. The range was really pretty good.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.2
buttons the lites
should flash if your remote end hangs. Before doing this test, I thought we
didn't have call sup, but turns out it just had a 6-11 second delay.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Quoting denzel-infotechs &l
That is also when I have seen a few crashes of 0.7.2, when doing lots of edits.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Quoting John Fraizer <[EMAIL PROTECTED]>:
> Geert Nijpels wrote:
> > I run 0.7.2 and have no
wide). I like the HP ProCurve 48 port for its good warranty, rep, and, low
cost per port. If we decide to go with power over ethernet, however, we are
leaning towards Cisco.
I am curious what others are using.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax
I agree, I think they would be useful too. Just don't know of anyway to
currently do it with *. Would also like to have a working intercom option.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Quoting Jeff Crews <[EMAIL PROTECTED
Asterik? I
would like to buy a couple hundred of them, but they need work reliably. I would
love to compare notes with someone to see if my experiences are a typical.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Quoting Craig Waddington
Paul forwarded the request for me. We are looking for 620 numbers for local
dialing in Winfield Kansas. Most numbers are 620-221-.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Quoting "Arnold Cavazos Jr." <[EM
nd on (mostly not) to transfer to extension 2000.
Using Asterisk 0.7.2
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Visit Winfield Public Schools at http://usd465.com
-
This mail sent throug
was a digital
line eg ISDN)
Regards
Jonathan
- Original Message -
From: "Mickey Binder" <[EMAIL PROTECTED]>
To: "Asterisk maillist" <[EMAIL PROTECTED]>
Sent: Friday, February 13, 2004 11:13 AM
Subject: [Asterisk-Users] Hide outgoing CallerId on Zap int
103,AGI(cepstral.agi,You have just left the Welcome queue)exten =>
270,104,Hangup
It works when I log in but when I try to log out it
crashes (403 error). I know that the AddQueueMember returns -1, so why
does it not jump to priority 102 instead?
Any ideas / sugestions
welcome.
Jonathan
I had two system freezes this weekend, first time. I just setup Musiconhold. The
kernel panic referenced mpg123. I turned off musiconhold until I could look into
it more.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Quoting Mark Spencer
Currently in progress of trying to debug similar
problem on my own system. Sometimes it happened
during call transfers, but this last time,
it happened all by itself at 4:00 AM, no calls even
close. Complete system Freeze, Nothing at all
workings, except the reset button.
You setup is vastly di
nd is very idle CPU wise so I don't our Asterisk is bogging down. Just
curious if anyone can shed some light on this.
Thanks,
Jonathan
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSU
There are two stages in the process of getting callerID information from a
standard modem, to be used in Asterisk. The first stage is actually
capturing the information from the modem, the second stage is importing the
captured data into Asterisk.
Capturing the caller ID details from the modem
I
of OpenMCU. Some of the more
sophisticated MCU servers allow individual users to select which views they get.
I think this would be an extremely cool feature for * to support. I can think of
several potential clients I could snag with such a setup.
--
Jonathan Moore
Director of Technology
Winfield
I would also be interested in this in regards to working with D-Link
videophones. They use the same setup as netmeeting h.263, but with another rfc
add on. I know current OpenH323 configs do not quite work with it, but I saw a
post that it is in cvs working using a patch to ffmpeg.
--
Jonathan
Just tried loading this up. My mouse was jumping all over the place for
some reason. Have you guys tried this software on multi-monitor
workstations?
Samuel Jimenez wrote:
Nice!!
Have just tried it a bit, seems cool... Congrats!!!
Will test it
I may be misunderstanding the question but what is wrong with using an extension
line like the following?
exten => 3,1,Dial(SIP/snom200&SIP/snom100&SIP/gs1,15,Ttr)
I use this to have all three desk phones in my office ring on the same menu
option/extension.
--
Jonathan Moore
I have a similar setup currently with 7 incomming lines. We purchased an Adit
600 CB from Suntel data with 1 8 port fxo and 1 8 port fxs for $800. T100P for
about $500. Cost is of course relative to the money you will save on line
charges :-).
--
Jonathan Moore
Director of Technology
Winfield
> > MySQL support was moved out to "addons." You don't have to use ODBC
> > to point to MySQL, but I would say it's probably a good idea. There
> > is no guarantee that anyone will continue to update the mysql code
> > now that the license on mysql has changed.
>
Can anyone explain what has chan
very promising. I am
trying this and Debian to see which will be easier to keep updates for. Info and
ISO file available at
http://www.beau.org/~jmorris/linux/whitebox/index.html
Someone else has a similar project going but it didn't seem to be as far along.
--
Jonathan Moore
Direct
Just to add some info from recent experience. May
help,
May not 1 X100P 2 X 4 port TDM400P
Had to hook a dial-in palm PDA base for a custom
software implementation to my * system and have the
modem dial out and work properly. Phone connects to
second port on PDA Base
Experienced very bad "ele
erall strategese that work.
We have a ton of businesses in our area that are this size.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Visit Winfield Public Schools at http://usd465.com
-
This
tay up too late working on
this stuff.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Quoting Philipp von Klitzing <[EMAIL PROTECTED]>:
> Hi!
>
> > Now the system seems to be working fine but only records blank audio i
system seems to be working fine but only records blank audio in the
voicemail files. Same thing with the 8000/8001 record gsm and playback gsm
extensions.
Please help!
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Visit Winfield Public
Quoting Jonathan Moore <[EMAIL PROTECTED]>:
> On Tue, 13 Jan 2004, James Sharp wrote:
>
> > > I have a little more info on this. Following the suggestion of another
> > > post on
> > > this topic I tracked down an analog phone with lighted buttons powered
&
On Tue, 13 Jan 2004, James Sharp wrote:
> > I have a little more info on this. Following the suggestion of another
> > post on
> > this topic I tracked down an analog phone with lighted buttons powered by
> > the
> > phone connection. I directly connected the phone to one of my inbound
> > lines a
happen almost immediately.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Quoting Joel Maslak <[EMAIL PROTECTED]>:
> On Tue, 13 Jan 2004, Jonathan Moore wrote:
>
> > LSRB = Loop Start with Reverse Battery
> > I beli
am also originating the clock
source from the * side with Wildcard T1 card.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Visit Winfield Public Schools at http://usd465.com
-
This mail se
T 600. I also have the option of
going to groundstart signalling if this would fix the problem.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Visit Winfield Public Schools at http://usd46
Quoting Rich Adamson <[EMAIL PROTECTED]>:
> > > Personal opinion is that throwing a channel bank at * (other then for
> > > better echo cancellation on trunks) is like taking a shower with your
> > > socks on; don't see any practical use. But, I'm sure some do.
> >
> > This statement assumes a l
Quoting Rich Adamson <[EMAIL PROTECTED]>:
>
> Personal opinion is that throwing a channel bank at * (other then for
> better echo cancellation on trunks) is like taking a shower with your
> socks on; don't see any practical use. But, I'm sure some do.
This statement assumes a lot.
1. That you
configuration I wanted.
I made the wrong initial purchase and ended up with an AB1 (with broken ring
generator to boot). They definetely do not support disconnect supervision.
http://www.sunteldata.com/
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax
. Additionally, we had 30 voice mail messages
today all but three of which were empty messages. I believe this has something
to do with a feature called call supervision. How do I make * and or the Adit
600 detect the hangups properly?
--
Jonathan Moore
Director of Technology
Winfield Public
in my extensions.conf for integration with the phones. We
mostly use the vm to email so the button thing isn't that important.
;Mailbox access to message buttons setup (retrieving VM)
exten => _78,1,Wait(1)
exten => _78,2,VoicemailMain(${EXTEN:2})
exten => _78,3,Hangup
Quoting Steven Critchfield <[EMAIL PROTECTED]>:
> Anyways, while hotswap PSUs may not be important, any machine that is
> important is important enough for redundant supplies. It doesn't add
> much to the cost of the case and is a good insurance policy.
> --
> Steven Critchfield <[EMAIL PROTEC
Quoting Steven Critchfield <[EMAIL PROTECTED]>:
> If you come at your install with a couple of computers, you can have a
> similar effect. My main asterisk machine has the PRI attached to it.
> This machine does little work, and receives next to no upgrades. It was
> locked down and does just PSTN
Thanks that is good information. I knew there were several options for
restarting, but hand't looked closely at the "when convenient" option. I think
that may be very practical.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
system by making things harder
than it needs to be.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Quoting Peter Brown <[EMAIL PROTECTED]>:
> At 11:25 8/01/04 +0100, you wrote:
> >Well, mailing list growth is not only a good t
say that I was able today to do an * reload during the day, by just
watching the phone lines and waiting for all of them to go free. This of course
will get harder as we add more sites into the central system.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Quoting Andrew Thompson <[EMAIL PROTECTED]>:
> - Original Message -
> From: "Jonathan Moore" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
>
to go into effect
without closing * and starting it again. It also seems like some changes in
sip.conf don't go into effect either.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Quoting Cees de Groot <[EMAIL PROTECTED]>:
See below
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Quoting Cees de Groot <[EMAIL PROTECTED]>:
> Jim Flagg <[EMAIL PROTECTED]> said:
> >Agreed, Guess I should have said "traditional computer". Mos
in any redundancy at the server level
with them as the clients.
Any ideas?
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Quoting Adthrawn <[EMAIL PROTECTED]>:
> Hi,
>
> Most companies we work with, have 'designated
back.
--
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508
Quoting tony banks <[EMAIL PROTECTED]>:
>
> Hello
>
>
>
> Though my SNOM 200 phone receive a voice mail but it doesn't show MWI on the
> LCD panel, In
801 - 900 of 949 matches
Mail list logo