My incoming BV has been intermittant for the last two days as well. It
has gone down somewhere around 4:30 PM Eastern two days in a row, then
been back up in the morning. In the 10:00 AM hour today, it was down for
about ten minutes.
Jason Schafer writes:
I have been trying on and off for a
I'm not sure if it matters, but I am running Asterisk 1.0.9. I used the
AAH distribution to do the build.
Jason
___
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
No incoming voice or incoming calls?
Jason Schafer wrote:
I'm not sure if it matters, but I am running Asterisk 1.0.9. I used the
AAH distribution to do the build.
Jason
___
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users
Hi:
I am running AAH and setup Broadvoice, but when I call in to the BV
number I cannot send dial commands to my auto attendant or speak if I
use a did to send the inbound calls to a specific extension. I'll
gladly capture an SID debug and place a call, or post any necessary conf
files.
I cannot send dial commands to my auto attendant or speak if I use a did to send the inbound calls to a specific extension
Does asterisk says something in the verbose console?
please post your sip.conf relevant entries for BroadVoice. I have just
cancelled with BroadVoice (too much latency for
Does asterisk says something in the verbose console?
I'm not sure what the verbose console is, but I can run sip debug and
post the output when I make an inbound call.
please post your sip.conf relevant entries for BroadVoice.
[general]
port = 5060 ; Port to bind to (SIP is
and Broadvoice, no incoming voice
Does asterisk says something in the verbose console?
I'm not sure what the verbose console is, but I can run sip debug and
post the output when I make an inbound call.
please post your sip.conf relevant entries for BroadVoice.
[general]
port = 5060 ; Port
I have been trying on and off for a couple of weeks to no avail...
Darren Wright wrote:
I am also a long time client, and have no incoming BV today.
-Darren
http://lists.digium.com/mailman/listinfo/asterisk-users
___
--Bandwidth and Colocation
Darren Wright wrote:
I am also a long time client, and have no incoming BV today.
-Darren
it works here today but they can be a bit unpredictable
I use a cheap byod lite account mostly as a test tool. I figure if they
grow up someday I might use them more.
I have been wondering if
I'm relatively new to the whole VOIP game, here's what I want to do. I
am using VOIPJet for all of the outbound calls on our AAH box. I have
one landline that I would like to busy forward to an inbound VOIP
number. Broadvoice was recommended to me for price and quality.
Can anyone make a
IMHO - you should not use price and quality in the same sentence for BV.
On Mon, 2005-09-26 at 15:20 -0400, Jason Schafer wrote:
I'm relatively new to the whole VOIP game, here's what I want to do. I
am using VOIPJet for all of the outbound calls on our AAH box. I have
one landline that I
connect.voicepulse.com allows up to 4 calls at a time coming into an
$11/month DID with choice of IAX or SIP
there was discussion here and other places before about broadvoice
allowing the calls but then charging 3.9c a minute for the extra
channels used
shop carefully
Jason Schafer wrote:
This sounds like a winner, are you using voicepulse?
Also, I downloaded the iso for AAH 1.5. Are there any noteworthy bugs
that are fixed? I don't really like to upgrade unless I need to.
Jason
Paul wrote:
connect.voicepulse.com allows up to 4 calls at a time coming into an
$11/month DID
: Re: [Asterisk-Users] Asterisk and Broadvoice, no incoming voice
I'm relatively new to the whole VOIP game, here's what I want to do. I
am using VOIPJet for all of the outbound calls on our AAH box. I have
one landline that I would like to busy forward to an inbound VOIP
number. Broadvoice
Using voicepulse retail account because I need the caller ID name. Maybe
they have added that to connect accounts by now.
Jason Schafer wrote:
This sounds like a winner, are you using voicepulse?
Also, I downloaded the iso for AAH 1.5. Are there any noteworthy bugs
that are fixed? I don't
:[EMAIL PROTECTED] On Behalf Of Terry
Evans
Sent: Saturday, October 23, 2004 4:33 PM
To: [EMAIL PROTECTED]
Subject: [Asterisk-Users] Asterisk and Broadvoice, no incoming voice
I just signed up for the BroadVoice service a few hours ago, but for
the life of me I can't get any incoming voice
] Asterisk and Broadvoice, no incoming voice
I just signed up for the BroadVoice service a few hours ago, but for
the life of me I can't get any incoming voice. The incoming
connection is fine as it rings my extension from outside, but I can't
hear anyone talking. Outgoing voice is working fine thoug
and Broadvoice, no incoming voice
I just signed up for the BroadVoice service a few hours ago, but for
the life of me I can't get any incoming voice. The incoming
connection is fine as it rings my extension from outside, but I can't
hear anyone talking. Outgoing voice is working fine though
I just signed up for the BroadVoice service a few hours ago, but for
the life of me I can't get any incoming voice. The incoming
connection is fine as it rings my extension from outside, but I can't
hear anyone talking. Outgoing voice is working fine though.
I've been looking through the
On Sat, 23 Oct 2004, Terry Evans wrote:
I just signed up for the BroadVoice service a few hours ago, but for
the life of me I can't get any incoming voice. The incoming
connection is fine as it rings my extension from outside, but I can't
hear anyone talking. Outgoing voice is working fine
It also sounds like some type of NAT issue to me, but I can't figure
out what's going wrong. I changed the RTP ports back to 1-2
and set the router up to forward those, but still no incoming voice.
Kevin suggest I try the two inbound sections in the sip.conf, but I
had already tried them
and Broadvoice, no incoming voice
I just signed up for the BroadVoice service a few hours ago, but for
the life of me I can't get any incoming voice. The incoming
connection is fine as it rings my extension from outside, but I can't
hear anyone talking. Outgoing voice is working fine though.
I've been
22 matches
Mail list logo