:24 PM
Subject: RE: [Asterisk-Users] ISDN PRI E1 configuration with E100P
Hi,
Would you be kind enough to spare you zaptel.conf file for the E100P ?
Regards,
Abdul Hakeem
--This mail sent through OmniBIS.com
Very sorry about the previous mail,
heres the mail again,
hi Everyone,
We are configuring an ISDN PRI E1 with an E100P card, when you load the drivers, and
starts the
asterisk, cards also starts fine, givin following output,
*CLI
== D-Channel on span 1 up
-- B-channel 1 successfully
Unfortunatelly if your telco doesn't send you any DID along with the SETUP
message you need to have immediate=yes in zapata.conf for those channels.
regards
Martin
On Fri, 11 Jul 2003 [EMAIL PROTECTED] wrote:
Very sorry about the previous mail,
heres the mail again,
hi Everyone,
We are
[EMAIL PROTECTED] wrote:
hi Everyone,
We are configuring an ISDN PRI E1 with an E100P card, when you load
the drivers, and starts the asterisk, cards also starts fine, givin
following output,
*CLI
== D-Channel on span 1 up
-- B-channel 1 successfully restarted on span 1
-- B-channel
[EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, July 11, 2003 10:39 PM
Subject: Re: [Asterisk-Users] ISDN PRI E1 configuration with E100P
[EMAIL PROTECTED] wrote:
hi Everyone,
We are configuring an ISDN PRI E1 with an E100P card, when you load
the drivers, and starts the asterisk
, July 11, 2003 10:39 PM
Subject: Re: [Asterisk-Users] ISDN PRI E1 configuration with E100P
[EMAIL PROTECTED] wrote:
hi Everyone,
We are configuring an ISDN PRI E1 with an E100P card, when you load
the drivers, and starts the asterisk, cards also starts fine, givin
following
]
To: [EMAIL PROTECTED]
Sent: Saturday, July 12, 2003 12:41 AM
Subject: Re: [Asterisk-Users] ISDN PRI E1 configuration with E100P
Look in zttool or head /proc/zaptel/[1-5]
to see if the spans are in alarms. The leds on your boards might not lit
properly.
regards
Martin
On Fri, 11 Jul 2003 [EMAIL