To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Snom 360 lights not working on
subscription
Hey Mike,
We started deploying exclusively Polycom and Linksys. The Polycom's
support presence, they call it 'Buddy List'. I am not sure about the
Linksys
In order to get subscriptions working and the Snom 360 lights turns
on, I have set everything just like all the pages in the net explain.
So, I get subsciption working. I can list subscription on the
asterisk and if I use the SIP trace function built in at the SNOM nad
see NOTIFY
-Commercial Discussion
Subject: Re: [asterisk-users] Snom 360 lights not working on subscription
Hey Mike,
We started deploying exclusively Polycom and Linksys. The Polycom's
support presence, they call it 'Buddy List'. I am not sure about the
Linksys phones, I don't think they do although I did see support
Dear friends,
I am working around with a Snom 360 and Asterisk 1.4 + FreePBX
In order to get subscriptions working and the Snom 360 lights turns
on, I have set everything just like all the pages in the net explain.
So, I get subsciption working. I can list subscription on the
asterisk and
What we found is that even if you get the lights working, they go off
after a few days.
Paul Hales
AsteriskIT
On Mon, 2007-10-22 at 09:49 -0300, Carlos Maimone wrote:
Dear friends,
I am working around with a Snom 360 and Asterisk 1.4 + FreePBX
In order to get subscriptions working and
I used to deploy these phones, it was these types of issues that
forced me to drop it. It took way too long to troubleshoot the
problems and there was a general lack of documentation. This was 2
years ago, things might have changed. If I remember correctly, it was
this issue you are having that
PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Omar A.
Sabek
Sent: Monday, October 22, 2007 9:27 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Snom 360 lights not working on
subscription
I used to deploy these phones, it was these types of issues
-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Omar A.
Sabek
Sent: Monday, October 22, 2007 9:27 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Snom 360 lights not working on
subscription
I used to deploy these phones
Does someone know coincidentally the cause for the error message specified in
the Subject?
The following scenario: Snom 360 behind one rout (wiederrum on a DSL line with
static IP address hangs). The Snom has a private IP, routs accomplishes NAT.
STUN and ICE are activated, as SIP haven
Hi,
Is this a real question? I'm asking because it seems to be a
babelfish translation of a post in a german forum
http://www.ip-phone-forum.de/archive/index.php/t-99696.html
from over a year ago. (is their date wrong?)
Dovid B wrote:
Does someone know coincidentally the cause for the error
Subject: Re: [asterisk-users] SNOM 360 Rejecting Calls
Hi,
Is this a real question? I'm asking because it seems to be a
babelfish translation of a post in a german forum
http://www.ip-phone-forum.de/archive/index.php/t-99696.html
from over a year ago. (is their date wrong?)
Dovid B wrote:
Does
Hi,
I`ve a strange problem since an upgrade from Asterisk 1.2 to 1.4.1.
If a SNOM 360 calls (internal) another phone type than SNOM (e.g. Linksys,
Thomson we have here), there is no audio transmission anymore.
I`ve upgraded the phone to the latest firmware with auto upgrade. No results.
Hi Erik,
have tried to switch of RTP Encryption on the snom (in the account/identity
connected to Asterisk).
Cheers
Tim
On 4/26/07, Erik Wartusch [EMAIL PROTECTED] wrote:
Hi,
I`ve a strange problem since an upgrade from Asterisk 1.2 to 1.4.1.
If a SNOM 360 calls (internal) another phone
Is there a reboot for the phone neccessary? If no then it didn`t work. I
tested to call a Linksys phone with deactivated RTP encryption, no audio
transmission.
Erik
Am Donnerstag, 26. April 2007 10:28 schrieb Tim Koehler:
Hi Erik,
have tried to switch of RTP Encryption on the snom (in the
Him Tim,
Tim Koehler wrote:
have tried to switch of RTP Encryption on the snom (in the account/identity
connected to Asterisk).
Nice to know you're on the list. :)
Grüße,
Philipp
--
amooma GmbH - Bachstr. 126 - 56566 Neuwied - http://www.amooma.de
Let's use IT to solve problems and
Hi List,
We have noticed on our Snom 360s that under missed/recieved calls the number
is cut off, so you cannot see the entire phone number. Does anyone have a
work around or is this a bug Snom is working on?
Cheers!
___
--Bandwidth and Colocation
Hi,
I have got my new phone working with Asterisk, and must say it is very
very good combination. Now I have WMI working, but what I would like to
be able to do is press the DND button on the phone and for all calls to
my extension to be forwarded direct to my voicemail.
How can this be done
Hi UxBoD,
just create a voicemail for your extension and Asterisk will do the rest!!!
Giorgio Incantalupo
--[ UxBoD ]-- wrote:
Hi,
I have got my new phone working with Asterisk, and must say it is very
very good combination. Now I have WMI working, but what I would like to
be able to do is
exten = 123,1,Dial(SIP/123|20)
exten = 123,n,Voicemail(u123)
would be a start, you can have all kinds of fun...
On 3/30/07, --[ UxBoD ]-- [EMAIL PROTECTED] wrote:
Hi,
I have got my new phone working with Asterisk, and must say it is very
very good combination. Now I have WMI working, but
Hmmm, okay. But surely it will just try and ring the extension? Or do
you mean setup a seperate extension ie.
exten = 1001,1,Dial(sip/1001,20)
exten = 1001,2,VoiceMail([EMAIL PROTECTED],u)
exten = 1001,3,Hangup()
exten = 1001,101,VoiceMail([EMAIL PROTECTED],u)
exten = 1001,102,Hangup()
exten =
The snom360 DND button forces the phone to give a 480 do not disturb
response.
Bails
--[ UxBoD ]-- wrote:
Hmmm, okay. But surely it will just try and ring the extension? Or do
you mean setup a seperate extension ie.
exten = 1001,1,Dial(sip/1001,20)
exten = 1001,2,VoiceMail([EMAIL
Ahhh, awesome. Thank you :)
On Fri, 30 Mar 2007 18:47:30 +0100
bails [EMAIL PROTECTED] wrote:
The snom360 DND button forces the phone to give a 480 do not disturb
response.
Bails
--[ UxBoD ]-- wrote:
Hmmm, okay. But surely it will just try and ring the extension? Or
do you mean setup
bails wrote:
The snom360 DND button forces the phone to give a 480 do not disturb
response.
Bails
--[ UxBoD ]-- wrote:
Hmmm, okay. But surely it will just try and ring the extension? Or do
you mean setup a seperate extension ie.
exten = 1001,1,Dial(sip/1001,20)
exten =
PROTECTED]LOCAL/PAGE
[EMAIL PROTECTED])
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Jason Kim
Sent: Monday, 8 January 2007 2:30 PM
To: asterisk-users@lists.digium.com
Subject: [asterisk-users] snom 360 auto answer
Hi
Hi,
I'm testing paging using snom 360.
Can someone correct my dialplan?
Regards,
Jason.
==
;exten = _99,1,SIPAddHeader(Call-Info:
Answer-After=0)
;exten = _99,n,SIPAddHeader(Call-Info:
sip:192.168.1.113\;answer-after=0)
;exten =
)
exten =
99,1,Page(LOCAL/[EMAIL PROTECTED]LOCAL/[EMAIL PROTECTED]LOCAL/PAGE
[EMAIL PROTECTED])
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jason Kim
Sent: Monday, 8 January 2007 2:30 PM
To: asterisk-users@lists.digium.com
Subject: [asterisk-users
Hi,
we just upgraded from 1.2.10 to 1.2.13 and now encounter strange problems with
our snom phones (FW 6.2.3 to 6.5.1). Upon phone boot everything works fine.
Phone registers and asterisk is happy. Soon afterwards the registration is lost
however. Sometimes after a few minutes the phone
Hi guys. I just bought and configured a Snom 360 and have noticed that the
LCD is constantly flickering at a rate of ~10-15Hz (that's a guess).
Either way, it's very distracting. Has anyone else encountered this
before? Any solutions?
Cheers,
-- Nick
E: [EMAIL PROTECTED]
P: +61 7 5591 3588
F:
My company has had a few screens go out on us, but all of those were
completely blank. I'm not sure if we just got a bad batch or what, but
the Snom phones are usually a solid piece of hardware. I'd try to RMA it.
Nick Hoffman wrote:
Hi guys. I just bought and configured a Snom 360 and have
]
To: asterisk-users Mailing List asterisk-users@lists.digium.com
Sent: Tuesday, November 07, 2006 10:53 AM
Subject: [asterisk-users] Snom 360 flickering screen
Hi guys. I just bought and configured a Snom 360 and have noticed that the
LCD is constantly flickering at a rate of ~10-15Hz (that's a guess
- Original Message -
From: Nick Hoffman [EMAIL PROTECTED]
To: asterisk-users Mailing List asterisk-users@lists.digium.com
Sent: Tuesday, November 07, 2006 10:53 AM
Subject: [asterisk-users] Snom 360 flickering screen
Hi guys. I just bought and configured a Snom 360 and have noticed
Jay R. Ashworth wrote:
So, you're suggesting that the FXO channel driver generates outbound
DTMF under the command of (eventually) the phone set? That would be
nice.
Yes, that _would_ be nice. Are you suggesting that that's not what's
happening? I'm not sure I gather your meaning, or I
On Mon, Oct 09, 2006 at 08:50:51AM -0800, Mojo with Horan Company, LLC wrote:
Jay R. Ashworth wrote:
So, you're suggesting that the FXO channel driver generates outbound
DTMF under the command of (eventually) the phone set? That would be
nice.
Yes, that _would_ be nice. Are you
On Fri, Oct 06, 2006 at 08:35:26AM -0800, Mojo with Horan Company, LLC wrote:
I'm pretty sure that when you AREN'T sending the DTMF inband, asterisk
detects it, and if the keys pressed don't lead to any recording/transfer
features, then it re-creates DTMF on the bridged channel. I mean to
I cannot find this option in the snom firmware, the only thing I found is
DTMF via SIP INFO:
This sounds nice but I guess it will break stuff if you need DTMF tones to
get through the menu of a remote PBX.
Ideally * would need to interpret the SIP INFO message from the Snom as
start
Another way would be to set the dtmf option to speed dial and then add a
speed dial number 1: *1
___
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
Remco Barendse wrote:
I cannot find this option in the snom firmware, the only thing I found is
DTMF via SIP INFO:
This sounds nice but I guess it will break stuff if you need DTMF tones to
get through the menu of a remote PBX.
I'm pretty sure that when you AREN'T sending the DTMF inband,
On Thu, 5 Oct 2006, Joel Hill wrote:
No worries. Good question, I wasn't sure so I just tested it and it seems that
the answer is yes it does send the tones to the other side.
Can I ask why this would matter, I think there could be legal implications of
recording a call and not notifying the
That varies from location to location, really. In Georgia, for instance, only
ONE party need know the recording is taking place (calling or receiving)
without a warrant. In some countries, neither party need know, etc, etc.
N.
On Thu, 05 Oct 2006 15:25:28 +1000, Joel Hill wrote
No worries.
There was a patch to get this working, looks like it has been abandoned, though. Should give you a starting point to get it working, or perhaps a bounty would get someone interested in getting it usable and committed.
http://bugs.digium.com/view.php?id=4845
On 10/4/06, Joel Hill [EMAIL
Hi Joel,
thanks for the answer :-).
Yes this is one (the easiest) way how it can be done (on phone side),
but I am still
looking for asterisk side solution ...
i.e. it should understand info message sent by phone and do some
prescribed action.
Haven't u any clue ?
noro
2006/10/5, Joel Hill
On Thu, Oct 05, 2006 at 07:17:47AM -0400, sip wrote:
That varies from location to location, really. In Georgia, for instance, only
ONE party need know the recording is taking place (calling or receiving)
without a warrant. In some countries, neither party need know, etc, etc.
This page:
Hi Joe,
this is the link I was looking for - I ggled a lot, but didn't find it.
Thanke you !
noro
2006/10/5, Joe Pukepail [EMAIL PROTECTED]:
There was a patch to get this working, looks like it has been abandoned,
though. Should give you a starting point to get it working, or
We use SIP Polycom 501s, and their dtmfmode=rfc2833. The remote party
can NOT hear the tones when you start recording. I suspect that if
dtmfmode=inband, they WOULD be able to. Could be wrong here, that's
just my current rudimentary understanding of the situation :)
Moj
Remco Barendse
Hi,
I'd like to make record button working on snom 320/360 + asterisk.
As I learned from wireshark output, the phone produces SIP info
message Record: on, while record button pressed.
Can anybody give me an advice, how to teach asterisk to understand
that SIP info message and start recording
Hi Noro,
Depending on what firmware you have this is the way to go.
Go to the Functions keys page, then look for the Record button, Change
the type to DTMF and in number put in *1 which is the default Asterisk
recording function.
Hope this helps
Cheers,
Joel
Asterisk IT
Hi,
I'd like to make record button working on snom 320/360 + asterisk.
As I learned from wireshark output, the phone produces SIP info
message Record: on, while record button pressed.
Can anybody give me an advice, how to teach asterisk to understand
that SIP info message and start recording
Thanks for this, I was looking for this too.
Will the DTMF tone be audible to the other side? (In other words will they
know something is happening)
On Thu, 5 Oct 2006, Joel Hill wrote:
Hi Noro,
Depending on what firmware you have this is the way to go.
Go to the Functions keys page, then
No worries. Good question, I wasn't sure so I just tested it and it
seems that the answer is yes it does send the tones to the other side.
Can I ask why this would matter, I think there could be legal
implications of recording a call and not notifying the other party.
That's why you always get
2) One digium quadri primary ISDN interface (TE410P)
3) Two Rhino Channel Banks
4) 25 Analogue Phones on every channel bank
How I can configure function keys on my SNOM 360 for monitoring analogue
phone status?
I haven't used the Rhino Channel banks yet, so I'm guessing to some
degree
I have a Snom 360 phone and I'm configuring it for use with Asterisk
1.2.9 and Freepbx 2.1.1
On my PBX there are:
1) Some SIP phones
2) One digium quadri primary ISDN interface (TE410P)
3) Two Rhino Channel Banks
4) 25 Analogue Phones on every channel bank
How I can configure function keys on
- Original Message -
From: Steve Davies [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Sent: Monday, July 31, 2006 6:01 AM
Subject: Re: [asterisk-users] SNOM 360
On 7/31/06, Koopmann, Jan-Peter [EMAIL PROTECTED] wrote
- Original Message -
From: Steve Davies [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Sent: Monday, July 31, 2006 5:57 AM
Subject: Re: [asterisk-users] SNOM 360
On 7/28/06, Dovid Bender [EMAIL PROTECTED] wrote:
Also
On 8/4/06, Dovid Bender [EMAIL PROTECTED] wrote:
The snom does seem to manage its two local ports properly though but
this cannot be hard. Worst case is that the snom needs about 128Kb/s -
Not hard on a 100Mb/s full duplex connection :)
Dovid - Have you identified where the bottleneck is
On 8/4/06, Dovid Bender [EMAIL PROTECTED] wrote:
The Qos field is part of the 802.11q header, so is only available if
a VLAN has been configured.
VLAN 0 is a perfectly valid VLAN, and will cause an 802.11q packet
header to be added to all the phone traffic. This will then only work
if the
Dovid Bender wrote:
- Original Message - From: Steve Davies [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Sent: Monday, July 31, 2006 6:01 AM
Subject: Re: [asterisk-users] SNOM 360
On 7/31/06, Koopmann, Jan-Peter
On Friday, July 28, 2006 3:08 PM Dovid Bender wrote:
I am trying to have thier PC run thru the port on the phone and the
phone give prioroty to itself and the rest to the PC. When my client
does a big download the phone call gets real bad. The docs from SNOM
on TOS (or DIFFSERV) is poor and I
On 7/28/06, Dovid Bender [EMAIL PROTECTED] wrote:
Also SNOM says by Vlan to set the vlan and then the value for the qos. When
you set Vlan to 0 it is supposed to be no Vlan. However once I set it the
vlan on the SNOM to 0 and I reboot the phone is no long accessable from the
network and I have
On 7/31/06, Koopmann, Jan-Peter [EMAIL PROTECTED] wrote:
On Friday, July 28, 2006 3:08 PM Dovid Bender wrote:
I am trying to have thier PC run thru the port on the phone and the
phone give prioroty to itself and the rest to the PC. When my client
does a big download the phone call gets real
On Freitag, 28. Juli 2006 12:37 Dovid Bender wrote:
Does anyone know how to set up QoS on the SNOM 360 ? Thanks.
What _EXACTLY_ are you trying to accomplish? There is no simply QoS switch on a
Snom 360 that will manage things for you. AFAIK all you can do is tell the
phone (or * or whatever)
On 7/28/06, Koopmann, Jan-Peter [EMAIL PROTECTED] wrote:
On Freitag, 28. Juli 2006 12:37 Dovid Bender wrote:
Does anyone know how to set up QoS on the SNOM 360 ? Thanks.
What _EXACTLY_ are you trying to accomplish? There is no simply QoS switch on a
Snom 360 that will manage things for you.
or docs on how they did this ?
Doid
- Original Message -
From: Koopmann, Jan-Peter [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Sent: Friday, July 28, 2006 3:17 AM
Subject: RE: [asterisk-users] SNOM 360
On Freitag, 28
-
From: Koopmann, Jan-Peter [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Sent: Friday, July 28, 2006 3:17 AM
Subject: RE: [asterisk-users] SNOM 360
On Freitag, 28. Juli 2006 12:37 Dovid Bender wrote:
Does anyone know how to set
switch. I like m0n0wall for routers and cisco for switches.
--
Message: 9
Date: Fri, 28 Jul 2006 09:08:17 -0400
From: Dovid Bender [EMAIL PROTECTED]
Subject: Re: [asterisk-users] SNOM 360
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk
Hi List,Does anyone know how to set up QoS on
the SNOM 360 ? Thanks.
Dovid
___
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Dovid
BenderSent: Wednesday, July 26, 2006 12:46 PMTo:
asterisk-users@lists.digium.comSubject: [asterisk-users] Snom
360
Hello List,
I am trying to configure QoS for the SNOM 360. I
plugged the phone
Hello List,
I am trying to configure QoS for the SNOM 360. I
plugged the phone in to the internet and then had the customers computer plug in
to the phone. Whith default settings when I talked on the phone it was great. As
soon as I started a big download the phone call became unclear. I
Hi,
Has anybody experience with Snom360 and Firmware 6.X with Asterisk 1.2.X? I
am currently using Firmware 5.5 without serious problems but wanted to make
sure 6.X will work as well (including subscription etc.)
Kind regards,
JP
smime.p7s
Description: S/MIME cryptographic signature
Discussion
Subject: [Asterisk-Users] Snom 360 with Firmware 6.1?
Hi,
Has anybody experience with Snom360 and Firmware 6.X with
Asterisk 1.2.X? I am currently using Firmware 5.5 without
serious problems but wanted to make sure 6.X will work as
well (including subscription etc
on phone is turned to OFF. This is a stupid feature to have on by default
from the factory.
-Original Message-
From: Edward de Zeeuw [mailto:[EMAIL PROTECTED]
Sent: Wednesday, June 21, 2006 11:54 AM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] Snom 360 Passsword Issue
I
Koopmann, Jan-Peter wrote:
Hi,
Has anybody experience with Snom360 and Firmware 6.X with Asterisk 1.2.X? I
am currently using Firmware 5.5 without serious problems but wanted to make
sure 6.X will work as well (including subscription etc.)
Use the very latest - 6.2.1. It seems quite good.
Message-
From: Edward de Zeeuw [mailto:[EMAIL PROTECTED]
Sent: Wednesday, June 21, 2006 11:54 AM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] Snom 360 Passsword Issue
I have multiple (20+) Snom 360 phones communicating with asterisk
1.2.7.1. Almost regularly (daily
I have multiple (20+) Snom 360 phones communicating with asterisk
1.2.7.1. Almost regularly (daily) and in some cases ongoing 9every 10
minutes the phones ask for password and id the account they are seeking
the password for. If I hit the X key the phone continues operating
normally. Has anyone
-users@lists.digium.com
Subject: [Asterisk-Users] Snom 360 Passsword Issue
I have multiple (20+) Snom 360 phones communicating with asterisk
1.2.7.1. Almost regularly (daily) and in some cases ongoing 9every 10
minutes the phones ask for password and id the account they are seeking
the password
turn challenge_response off
On 6/21/06, Edward de Zeeuw [EMAIL PROTECTED] wrote:
I have multiple (20+) Snom 360 phones communicating with asterisk
1.2.7.1. Almost regularly (daily) and in some cases ongoing 9every 10
minutes the phones ask for password and id the account they are seeking
the
Hi,
I'm trying my new Snom 360 phone (6.2 firmware) and I'm seeing that it
doesn't register with the Asterisk 1.2.9.1 server after a reboot. I need to
click Re-register in the web interface.
I set:
- Support broken Registrar: On
- RTP Encryption: Off
Any help?
--
Domenico Viggiani
Mimmus wrote:
Hi,
I'm trying my new Snom 360 phone (6.2 firmware) and I'm seeing that it
doesn't register with the Asterisk 1.2.9.1 server after a reboot. I need to
click Re-register in the web interface.
I think that was fixed in 6.2.1. See
http://www.snom.com/wiki/index.php/Beta_Firmware
: Re: [Asterisk-Users] Snom 360 Firmware 6.0 - Microbrowser
Hello,
snom 360s can handle xml messages via SIP-Notify.
Descriptions how to implement this on:
http://snom.com/minibrowser/doc/xmlapplsnom360.pdf
http://snom.com/minibrowser/notify.txt
Common infos you can find out on: http://snom.com/wiki
Hello,
snom 360s can handle xml messages via SIP-Notify.
Descriptions how to implement this on:
http://snom.com/minibrowser/doc/xmlapplsnom360.pdf
http://snom.com/minibrowser/notify.txt
Common infos you can find out on: http://snom.com/wiki/index.php/Xmlobjects
Hope this will help...
cheers,
,
Frederic
-Oorspronkelijk bericht-
Van: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Namens Hirosh Dabui
Verzonden: dinsdag 18 april 2006 17:02
Aan: Asterisk Users Mailing List - Non-Commercial Discussion
Onderwerp: Re: [Asterisk-Users] Snom 360 Firmware 6.0 - Microbrowser
Hello,
snom 360s can
By now, every Snom fan
should have installed the 6.0 (beta) firmware :-) See http://www.snom.com/wiki/index.php/Beta_Firmware
The XML minibrowser is very
cool and opens a lot of possibilities!
One of my ideas is
rich messaging, so you can send fully formatted messages to a Snom
360
TWV wrote:
By now, every Snom fan should have installed the 6.0 (beta) firmware :-)
See http://www.snom.com/wiki/index.php/Beta_Firmware
I had to revert back to 5.5, because 6.0 kept garbling my LCD screen
(the screen would become unreadable). You might want to wait for 6.0.1 :-)
- Mike
bericht-
Van: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Namens Dr. Michael J.
Chudobiak
Verzonden: maandag 17 april 2006 18:45
Aan: Asterisk Users Mailing List - Non-Commercial Discussion
Onderwerp: Re: [Asterisk-Users] Snom 360 Firmware 6.0 - Microbrowser
TWV wrote:
By now, every Snom fan should
Onderwerp: Re: [Asterisk-Users] Snom 360 Firmware 6.0 - Microbrowser
TWV wrote:
By now, every Snom fan should have installed the 6.0 (beta) firmware :-)
See http://www.snom.com/wiki/index.php/Beta_Firmware
I had to revert back to 5.5, because 6.0 kept garbling my LCD screen
(the screen would
I may need a consultant that can help with some problems.
We had 2 smaller satellite offices on the same asterisk systems with no
trouble. We've just upgraded the main office and hit troubles. There's
no going back because we've entirely outgrown our old system.
Any * consultants around
Hi,
This is a weird request, but does anyone have a Snom 360 monitoring
extensions for BLF on several Asterisk servers accross a network?
Alternatively, can anyone give me a pointer as to how to setup a Snom
360 to monitor an extension not on it's own server?
My scenario is that I have a
]
To: asterisk-users@lists.digium.com
Sent: Monday, March 27, 2006 10:57 AM
Subject: [Asterisk-Users] Snom 360 - Multiple Server BLF Indications
Hi,
This is a weird request, but does anyone have a Snom 360 monitoring
extensions for BLF on several Asterisk servers accross a network
AsteriskIT
- Original Message -
From: Stuart Elvish - Dallas Delta Corporation Pty Ltd
[EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Sent: Monday, March 27, 2006 11:41 AM
Subject: Re: [Asterisk-Users] Snom 360 - Multiple Server BLF
Manager
AsteriskIT
- Original Message -
From: Stuart Elvish - Dallas Delta Corporation Pty Ltd
[EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Sent: Monday, March 27, 2006 11:41 AM
Subject: Re: [Asterisk-Users] Snom 360 - Multiple
On Fri, 24 Mar 2006, Brian Kennedy wrote:
Anyone have a Snom they're happy with? How did you manage that? :)
I would be happier if snom fixed the US indications and the giant 3000
point font they use for everything.
-Dan
___
--Bandwidth and
Anyone have a Snom they're happy with? How did you manage that? :)
I have a system of:
Asterisk 1.2.3
2 Wildcard TDM400P Rev I and E/F
1 Snom 360 + sidecar
~15 Sipura/Linsys SPA-841
~15 Grandstream 101
Everything (currently) is on the same network, not a router to be seen
between any
Anyone have a Snom they're happy with? How did you manage that? :)
I have a system of:
Asterisk 1.2.3
2 Wildcard TDM400P Rev I and E/F
1 Snom 360 + sidecar ~15 Sipura/Linsys SPA-841
~15 Grandstream 101
Everything (currently) is on the same network, not a router to be seen
between any
Anyone have a Snom they're happy with? How did you manage that? :)
I have a system of:
Asterisk 1.2.3
2 Wildcard TDM400P Rev I and E/F
1 Snom 360 + sidecar
~15 Sipura/Linsys SPA-841
~15 Grandstream 101
Everything (currently) is on the same network, not a router to be seen
Guido Hecken wrote:
Anyone have a Snom they're happy with? How did you manage that? :)
I have a system of:
Asterisk 1.2.3
2 Wildcard TDM400P Rev I and E/F
1 Snom 360 + sidecar
~15 Sipura/Linsys SPA-841
~15 Grandstream 101
Everything (currently) is on the same network, not a
On 3/23/06, Jared Davison [EMAIL PROTECTED] wrote:
I was having trouble getting hints to work with my GXP-2000 (with the beta
firmware). I am running Asterisk 1.2.5. I had hyphens in the SIP channel
names and it wasn't working. I have changed them to underscores and it has
worked in 1.2.5. So
On 3/6/06, Colin Anderson [EMAIL PROTECTED] wrote:
I was always puzzled by posts to the list about people having problems
getting hints to work on a Snom, since I always seem to have no problem
making it work. That is, until today when I tried to get a sidecar to work.
All I could do was get a
On Wednesday 22 March 2006 05:26, Steve Davies wrote:
Another hint for getting hints working, although this only relates
to older 1.0.x versions of Asterisk (It is already fixed in 1.2.x) is
that status changes are not notified for channels where there is a
hyphen '-' in the channel name, so
On 3/22/06, Andrew Kohlsmith [EMAIL PROTECTED] wrote:
On Wednesday 22 March 2006 05:26, Steve Davies wrote:
Another hint for getting hints working, although this only relates
to older 1.0.x versions of Asterisk (It is already fixed in 1.2.x) is
that status changes are not notified for
Jared
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Steve Davies
Sent: Thursday, 23 March 2006 12:01 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Snom 360 Hinting tricks
On 3/22/06, Andrew Kohlsmith
After rebooting, I can make one outgoing call successfully. Subsequent
calls don't work - the 360 just seems to do nothing after pressing the
OK button (but I can cancel the call, the phone isn't frozen). The
Asterisk console shows the first call going through, but nothing
appears for the
1 - 100 of 192 matches
Mail list logo