Hi,
We had an install working quite well of SpanDSP on our machine until
recently where it has began spitting out an error stating
unable to translate from unknown to unknown.
Any ideas ?
Regards,
Sahil Gupta
VoiceValley
___
--Bandwidth and
: Friday, April 13, 2007 5:27:04 PM (GMT-0500) America/New_York
Subject: [asterisk-users] SpanDSP (RxFax)
Hi,
We had an install working quite well of SpanDSP on our machine until
recently where it has began spitting out an error stating
unable to translate from unknown to unknown.
Any ideas
On Mon, Nov 20, 2006 at 02:25:30PM -0800, daveasterisk wrote:
-- Executing [EMAIL PROTECTED]:2]
RxFAX(SIP/xxx.xxx.xx.xx-0821ec78, /tmp/recievedfax.tif) in new stack
saster*CLI
and that is where it just sits. no further messages.
the target file does not exist and the directory
Hi,
I trying to recieve fax with spanDSP and rxfax. scheme:
asterisk---sipUA(audiocodes mp-112)--fax(hp5610). I'm allways getting by
from UA at the beginning of transmission. Hi does that because sees that
rtp connection is broken. I suppose my multifunction hp box is not
working correctly
Ben Fried wrote:
Just to be clear, I have inbound and outbound faxes working with my
TDM400, by going the iaxmodem and hylafax route. No need for a
separate modem or an x100p card.
Be
Ah, that's interesting. Can you provide some details on how you set it up?
Phil
I'm doing this from memory, so there may be errors. I'm using [EMAIL PROTECTED]
2.2
as a base, though I'd added a bunch of RPMs for things like fonts
along the way.
Install hylafax - if you [EMAIL PROTECTED], there's a CentOS RPM for hylafax
you
can use. I believe I had to install some
Ben Fried wrote:
On 1/9/06, Rich Adamson [EMAIL PROTECTED] wrote:
Sorry in advance if this is a FAQ...
I've got a working Asterisk setup based on [EMAIL PROTECTED] 2.2. I have a
TDM400
card with 2 FXS and 2 FXO ports; PSTN connections come in via the TDM
card.
I haven't been able to get
Since writing my message, I appear to have had success using iaxmodem
+ hylafax to do inbound faxing. Setup was not completely obvious,
especially if you're usin [EMAIL PROTECTED], like me, I finally seem to have
inbound
faxes working properly now - 5 or 6 in a row have all come in just
fine.
Ben Fried wrote:
Since writing my message, I appear to have had success using iaxmodem
+ hylafax to do inbound faxing. Setup was not completely obvious,
especially if you're usin [EMAIL PROTECTED], like me, I finally seem to have
inbound
faxes working properly now - 5 or 6 in a row have all
Just to be clear, I have inbound and outbound faxes working with my
TDM400, by going the iaxmodem and hylafax route. No need for a
separate modem or an x100p card.
Be
On 1/16/06, Philip Edelbrock [EMAIL PROTECTED] wrote:
Ben Fried wrote:
Since writing my message, I appear to have had
On 1/9/06, Adam Goryachev [EMAIL PROTECTED] wrote:
On Mon, 2006-01-09 at 11:40 -0600, Rich Adamson wrote:
It would be very interesting to know the real numbers that have it
working.
The archives (and about two/three years of attempting to help others with
the exact same problem)
Ben Fried wrote:
On 1/9/06, Adam Goryachev [EMAIL PROTECTED] wrote:
I'd strongly suggest that people having problems, and who are interested
in marketing this as a solution, do some testing with different
motherboards/systems/etc and find a combination that works. Once you
have that, simply
Sorry in advance if this is a FAQ...
I've got a working Asterisk setup based on [EMAIL PROTECTED] 2.2. I have a
TDM400
card with 2 FXS and 2 FXO ports; PSTN connections come in via the TDM
card.
I haven't been able to get inbound fax with spandsp and rxfax to work.
Occasionally an
On 1/9/06, Rich Adamson [EMAIL PROTECTED] wrote:
Sorry in advance if this is a FAQ...
I've got a working Asterisk setup based on [EMAIL PROTECTED] 2.2. I have a
TDM400
card with 2 FXS and 2 FXO ports; PSTN connections come in via the TDM
card.
I haven't been able to get inbound
Sorry in advance if this is a FAQ...
I've got a working Asterisk setup based on [EMAIL PROTECTED] 2.2. I have
a TDM400
card with 2 FXS and 2 FXO ports; PSTN connections come in via the TDM
card.
I haven't been able to get inbound fax with spandsp and rxfax to work.
Rich Adamson wrote:
I'm certainly not the expert on this topic, but I believe the issue has
to do with the pci bus and probably relates to the TigerJet chip used on
the card. Until that's addressed, any analog modem use through the card
will be marginal at best. (Same issue as with the older
I'm certainly not the expert on this topic, but I believe the issue has
to do with the pci bus and probably relates to the TigerJet chip used on
the card. Until that's addressed, any analog modem use through the card
will be marginal at best. (Same issue as with the older x100p card.)
On Mon, 2006-01-09 at 11:15 -0600, Rich Adamson wrote:
It would be very interesting to know the real numbers that have it working.
The archives (and about two/three years of attempting to help others with
the exact same problem) suggests no better then maybe one in ten or twenty
will ever get
Rich Adamson wrote:
I'm certainly not the expert on this topic, but I believe the issue has
to do with the pci bus and probably relates to the TigerJet chip used on
the card. Until that's addressed, any analog modem use through the card
will be marginal at best. (Same issue as with the older
It would be very interesting to know the real numbers that have it working.
The archives (and about two/three years of attempting to help others with
the exact same problem) suggests no better then maybe one in ten or twenty
will ever get spandsp to work with the digium x100p or TDM card.
On Mon, 2006-01-09 at 11:40 -0600, Rich Adamson wrote:
It would be very interesting to know the real numbers that have it working.
The archives (and about two/three years of attempting to help others with
the exact same problem) suggests no better then maybe one in ten or twenty
will ever
Sorry in advance if this is a FAQ...
I've got a working Asterisk setup based on [EMAIL PROTECTED] 2.2. I have a
TDM400
card with 2 FXS and 2 FXO ports; PSTN connections come in via the TDM
card.
I haven't been able to get inbound fax with spandsp and rxfax to work.
Occasionally an all-text fax
I am getting the same problems -- undefined symbols with
spandsp-0.0.2pre21 and the fax modules from the same directory --
wonder if there are anylater versions? I am not using /usr/local/lib
for any of these so its not in the ld.so.conf.
Any assistance would be appreciated.
on Wed, 23 Nov 2005
The problem is your's. pre21 works with Asterisk 1.2, although I haven't
yet updated the Makefile patch to apply cleanly. Try looking for other
versions of spandsp left behind on your system.
Steve
John Covici wrote:
I am getting the same problems -- undefined symbols with
two things...verify the content of your /etc/ld.so.conf file must have
the path included(/usr/local/lib) and recompile and install...first
span and then asterisk...On 11/22/05, Dominik Simon [EMAIL PROTECTED] wrote:
Hi all,today I installed asterisk 1.2stable and than spandsp-0.0.2pre21 withrxfax
Hi all,
today I installed asterisk 1.2stable and than spandsp-0.0.2pre21 with
rxfax txfax. After I restart the asterisk and get the following
errors:
[app_rxfax.so] WARNING[6340]: loader.c:325 __load_resource: /usr/lib/
asterisk/modules/app_rxfax.so: undefined symbol:
Dominik Simon wrote:
Hi all,
today I installed asterisk 1.2stable and than spandsp-0.0.2pre21 with
rxfax txfax. After I restart the asterisk and get the following errors:
-
But I only have spandsl-0.0.2 installed, and the libs are in /usr/
local/lib, see:
-rw-r--r-- 1 root root 946280
Hi Doug,
hi list,
I installed spandsp-0.0.2 were the libspandsp.so.0.0.1 are included,
now I installed die spandsp-0.0.3 an you see:
the same problem - and now there is the libspandsp.so.0.0.2:
[app_txfax.so]Nov 22 16:15:38 WARNING[29448]: loader.c:325
__load_resource:
Dominik Simon wrote:
Hi Doug,
hi list,
I installed spandsp-0.0.2 were the libspandsp.so.0.0.1 are included,
now I installed die spandsp-0.0.3 an you see:
the same problem - and now there is the libspandsp.so.0.0.2:
[app_txfax.so]Nov 22 16:15:38 WARNING[29448]: loader.c:325
__load_resource:
Discussion
Subject: Re: [Asterisk-Users] SpanDSP rxfax TSID variable name?
Thanks Steve. That's exactly what I was looking for.
At the risk of embarrasing myself (I know, too late), where is this
'help'? I've searched the Wiki, I've been on the Digium forums, I've
looked for it in the Asterisk
Scott's SpanDSP FAQ mentions that the senders' TSID (20 bytes sent by
sending fax machine) is made available, but doesn't mention where or
how. Is there a variable or something that's set? I didn't see it in
http://www.voip-info.org/tiki-index.php?page=Asterisk+variables
Thanks,
Woody
Woody Sturges wrote:
Scott's SpanDSP FAQ mentions that the senders' TSID (20 bytes sent by
sending fax machine) is made available, but doesn't mention where or
how. Is there a variable or something that's set? I didn't see it in
Thanks Steve. That's exactly what I was looking for.
At the risk of embarrasing myself (I know, too late), where is this
'help'? I've searched the Wiki, I've been on the Digium forums, I've
looked for it in the Asterisk CLI, etc. I'm missing something that
seems to be pretty obvious. I'm
: Re: [Asterisk-Users] SpanDSP rxfax TSID variable name?
Thanks Steve. That's exactly what I was looking for.
At the risk of embarrasing myself (I know, too late), where is this
'help'? I've searched the Wiki, I've been on the Digium forums, I've
looked for it in the Asterisk CLI, etc. I'm
-
Just my 40
cents.
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Rob
DanzSent: Wednesday, July 13, 2005 8:18 AMTo:
asterisk-users@lists.digium.comSubject: [Asterisk-Users] SpanDSP
rxfax, no tiff.
Hello,
Let me start by saying I have
checked the wiki and the archiv
Maybe I over-complicated my question with the mailfax part.
If I leave the mailfax step out entirely, then there should
be a .tif file, right? But theres not. No tif file gets created at
all.
Permissions on the fax folder are 777 at the moment.
Thanks for the responses so far.
Rob Danz wrote:
If I leave the mailfax step out entirely, then there should be a .tif
file, right? But there’s not. No tif file gets created at all.
Permissions on the fax folder are 777 at the moment.
Are the permissions okay for getting TO that folder? (do you have r+x on
the directories
Hello,
Let me start by saying I have checked the wiki and the
archives and did find some relative information. I tried the suggestions
in those threads, but still have the same problem.
Im using the CVS Asterisk from July 11, 2005.
Redhat FC2
SpanDSP 0.0.2pre18
Libtiff 3.5.7
Digium
Hello Rob,
I don't really know the answer to your woes, but I have a queston.
Where are you downloading the rxfax and spandsp? I can't seem to hit
any of the sites that claim to have it.
Erik
On 7/13/05, Rob Danz [EMAIL PROTECTED] wrote:
Hello,
Let me start by saying I have checked
is /usr/local/sbin/mailfax flagged to 755?
Von: [EMAIL PROTECTED] im Auftrag von Rob Danz
Gesendet: Mi 13.07.2005 17:17
An: asterisk-users@lists.digium.com
Betreff: [Asterisk-Users] SpanDSP rxfax, no tiff.
Hello,
Let me start by saying I have checked the wiki
On Wed, Jul 13, 2005 at 11:30:07AM -0700, Erik Espinoza wrote:
Hello Rob,
I don't really know the answer to your woes, but I have a queston.
Where are you downloading the rxfax and spandsp? I can't seem to hit
any of the sites that claim to have it.
http://soft-switch.org/
They seem to
Hello Rob,
/usr/local/sbin/mailfax will execute mime-construct program. Have you
installed mime-construct?
Your dialplan should be:
[macro-faxreceive]
exten = s,1,SetVar(FAXFILE=/var/spool/asterisk/asterisk-fax/${UNIQUEID}.tif)
exten = s,2,rxfax(${FAXFILE})
exten = s,3,SetVar([EMAIL PROTECTED])
On Mon, 2005-03-28 at 18:18 -0800, Derrick Knight wrote:
I have got my Asterisk server running with TDM400 card (2xFXO 2xFXS).
I originally had the system configured with a Panasonic fax machine on
one of the extensions. Due to the high volume of fax spam, I figured it
would be a much
Thanks Dave,
I will strip out the macro and give it a try. It did appear from the
log that the macro was being called and the last command was rxfax.
The sending fax shows that it is getting connected, and then fails to
send the fax with a message that the receiving fax did not respond and
no
I just tried again with the macro stripped out (very simple
extensions.conf file) and I still have the same problem where the
system launches rxfax and then the line just eventually times out. I
thought I may have a problem with my zapata.conf file, so I tried with
the physical fax machine on
Hi,
I have got my Asterisk server running with TDM400 card (2xFXO 2xFXS).
I originally had the system configured with a Panasonic fax machine on
one of the extensions. Due to the high volume of fax spam, I figured it
would be a much better idea to capture the faxes as TIF or PDF files to
Hi Rob,
I used RxFax some time ago with success but the last CVS of asterisk
crashes when asterisk is going to start receiving data.
I'm trying with tiff-3.5.7 spandsp-0.0.1k and last asterisk CVS...
What versions do you use?
On Fri, 2004-09-10 at 14:09 -0500, Rob Fugina wrote:
I've
I've recently started playing with the RxFax application on my
Asterisk box. I've had success, mostly, but I've had some failures,
too...
The most recent failure is specific to receiving from a particular fax
machine -- a Canon Laser Class 9000S. The TIF images received are
readable, but the
Rob Fugina wrote:
I've recently started playing with the RxFax application on my
Asterisk box. I've had success, mostly, but I've had some failures,
too...
The most recent failure is specific to receiving from a particular fax
machine -- a Canon Laser Class 9000S. The TIF images received are
I've seen people mention that they have fax reception working with
Asterisk, spandsp, and app_rxfax.
I'm using the latest Asterisk from CVS, SpanDSP 0.0.1k, and the latest
app_rxfax.c (as mirrored by friendly list members recently), and libtiff
3.5.7. Asterisk is detecting the fax signal
I'm trying to install the RxFax in Asterisk.
After much trouble getting app_rxfax.c(and friends) compiles and installed
into Asterisk (thanks to the many asterisk-users messages) it did get it
installed. I have been unable to receive a legible fax. app_rxfax
provides lots of debugging
On Wednesday 28 April 2004 17:10, Martin Christian Koch wrote:
Rxfax answers, makes handshake, and crashes once the page starts to send.
It receives a .tif file of 8 bytes.
I am *just* starting to play with this. I found out I had libtiff-3.5.7
hanging around on the system, but I had
Initial handshake sounds fine, but asterisks dies
before receive of the fax. Here is the log :
Changed from phase 0 to 1
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Slow carrier up
Slow
53 matches
Mail list logo