I too am a bit confused. A source, like a satellite receiver usually has
one digital output, and an analog output. Normally you must activate one
in the menu, but its not recommended to use both at the same time.
The digital output is a normal coax, you can use any rca interconnect
for this
Blackstone;402467 Wrote:
Yes. Actually the dCS Pucinni U-Clock was the asynchronous USB solution
I was considering but both those solutions are more than I want to
spend. The U-Clock is like $5,000 and the Scarlatti upsampler is like
$12,000.
Yep they're huge money. I heard a Puccini with
I have a SB3, which I use, digits out, to a Tact pre-amp, but sometimes
use it with the headphone out feeding the dining room system, which has
no volume control, but relies on the variable out of the SB. Just
updated the squeezecentre software, and the SB did a firmware update
to.
In the past I
I have a Lavry DA10.
In order to avoid overload on the integrated amplifier inputs you
should set volume on the Lavry somewhere between 40 and 46. The exact
voltage values these correspond to are given in the Lavry manual. I
assume you are using unbalanced inputs on your integrated amplifier.
I believe the only way is to use an old squeezecenter and firmware
combination. This feature disappeared some time ago..
David
--
DaveWr
DaveWr's Profile: http://forums.slimdevices.com/member.php?userid=9331
View
Thanks Dave.. I just wanted to make sure someone is doing this. I'm
also wondering if anyone is using a programmable remote like the
harmony one to do the input switching with a one touch operation
instead of drilling down in the menu?
-Ross
--
Ross101
What a burn!
Seems a rather 'odd' feature
--
karlinamillion
karlinamillion's Profile: http://forums.slimdevices.com/member.php?userid=13106
View this thread: http://forums.slimdevices.com/showthread.php?t=60871
I'm using a SB3 for some time now and because of wife and kids I'm
listening quite often to the headphone out of the SB3.
My headphone is a Sennheiser HD600 and I'm sure it can do better than i
hear via the sb3. But i have no headphone amp and my preamp has no
headphone out.
How are your
raven22;402668 Wrote:
I'm using a SB3 for some time now and because of wife and kids I'm
listening quite often to the headphone out of the SB3.
My headphone is a Sennheiser HD600 and I'm sure it can do better than i
hear via the sb3. But i have no headphone amp and my preamp has no
-Stef-;402678 Wrote:
Take a look at http://www.beresford.me/main/main.html
Looks interesting, but i have a DAC (MF V-DAC) already.
--
raven22
raven22's Profile: http://forums.slimdevices.com/member.php?userid=16511
raven22;402668 Wrote:
I'm using a SB3 for some time now and because of wife and kids I'm
listening quite often to the headphone out of the SB3.
My headphone is a Sennheiser HD600 and I'm sure it can do better than i
hear via the sb3. But i have no headphone amp and my preamp has no
There were good reasons but I forget them right now :)
--
radish
radish's Profile: http://forums.slimdevices.com/member.php?userid=77
View this thread: http://forums.slimdevices.com/showthread.php?t=60871
I seem to recall this was necessitated because of firmware memory
restrictions (this might be wrong). It is tedious that a feature that
used to work perfectly has been removed - presumably to fit some other
feature in.
--
Phil Leigh
You want to see the signal path BEFORE it gets onto a
Anne;402509 Wrote:
The digital output is a normal coax, you can use any rca interconnect
for this output. There are no such thing really as a digital cable,
its all hype
Not really. A digital coax must be 75-ohm with 75-ohm connectors to
meet the spec. RCA/Phono connectors can't be
Looks like there's a willingness to put this option back, vote/comment
on this bug: http://bugs.slimdevices.com/show_bug.cgi?id=9053
--
radish
radish's Profile: http://forums.slimdevices.com/member.php?userid=77
View this
seanadams;402379 Wrote:
I'm not sure what would cause this, but there are a some reset
procedures that we can try which might help.
1. In Squeezecenter, go to settings, then player settings, and click
Reset player preferences
2. Press and hold power until the unit resets. Then
I have a velodyne DD-15 sub and wondering if I can connect this to the
analog left and right balanced outputs of the transporter. I currently
use the unbalanced rca outputs to my amp.
Just wondering if anyone has tried this setup?
I will have to change from XLR (balanced output) to rca to go
JezA;402515 Wrote:
Yep they're huge money. I heard a Puccini with and without the clock a
few weeks ago, it was utterly sensational. I suspect they'll be
addressing the computer-audio issue more coherently soon.
Unfortunately I'm not sure how much coherence you can expect from dCS
in the
RioTubes;371790 Wrote:
You are indeed working backwards. The critical interface is amp and
speakers. The transporter specs are pretty standard for a digital
source (2-3V output depending on unbalanced or balanced transmission
and benign impedance of around 100 ohm). Because you don't mention
Yes, if you get a balanced to single ended converter (the circuit is
fairly simple) you shouldn't have a problem. The outputs are fully
isolated.
--
SuperQ
SuperQ's Profile:
Hi,
Should be fine. Try first to connect the TP with the unbalanced outputs
(RCA) and add -10dB attenuation by changing the jumper position
internally in the TP. This will lower your output voltage from 2Vrms to
0.6 Vrms (~1/3) and avoid any problem. If the volume is loud enough,
this is fine
21 matches
Mail list logo
