On 17/06/2024 18:50, Bill Arlofski via Bacula-users wrote:
Hello Adam,
Not sure if this will be any help at all, but I just checked and see
that in my `mtx-changer-python.py` drop-in replacement script, to check
for tape cleaning required messages, I am using:
8<
sg_logs --page=0xc
Am 20.06.24 um 17:32 schrieb Radosław Korzeniewski:
Great! So what job logs say about a volume selection when it selects "a
wrong volume"?
Well, it looks for a volume named "Vol-xxx" in the tape loader, which is
wrong.
Your configuration seems to be fine, but what Bacula says about your
co
Hello,
śr., 19 cze 2024 o 14:28 Stefan G. Weichinger napisał(a):
> Am 19.06.24 um 09:46 schrieb Radosław Korzeniewski:
>
> > Did you label your tapes? You can't use tapes in Bacula without labeling.
>
> Sure I did!
>
>
Great! So what job logs say about a volume selection when it selects "a
wrong
Mandi! Gary R. Schmidt
In chel di` si favelave...
>> job involved (in the same pool, i think) start to write down spool to tape.
> MaximumSpoolSize is the total space used in the spool area, by all jobs.
After posting, i've looked more carefully at the log and understod that.
Sorry for the misu
Mandi! Andrea Venturoli
In chel di` si favelave...
> At a site, I'm backing up several machines, most of which are clients
> that are not powered on every day.
Ciao Andrea.
I use roughly the same schedule:
Allow Duplicate Jobs = no
Cancel Lower Level Duplicates = yes
Mandi! Adam Weremczuk
In chel di` si favelave...
> Any idea what's going on?
Consider that there are vendor utility to do quick and extensive tape unit
check; for HP unit, for example, there's LTT:
https://buy.hpe.com/it/it/storage/storage-software/storage-device-management-software/s
On 6/20/24 4:54 AM, Adam Weremczuk wrote:
OMG...
The only reason the script started failing was a different device
assignment caused by a reboot:
ls -al /dev | grep sg.
crw-rw 1 root tape 21, 0 Jun 19 12:25 sg0
crw-rw 1 root disk 21, 1 Jun 12 17:42 sg1
Once I've changed
On 6/20/24 8:58 AM, Marco Gaiarin wrote:
But, now, a question: this mean that in spool data get interleaved too? How
they are interleaved? File by file? Block by block? What block size?
No. When you have jobs running, take a look into the SpoolDirectory. You will see a 'data' *.spool file and
