Dear All,
I've been using Bacula for about 7 years and have never quite
understood how to properly configure these values in relation to each
other. In terms of an FD on a normal client I will typically use a Maximum
Concurrent Jobs = 5 setting in bacula-fd.conf.
On my "Backup Server" I run t
Dear All,
I am looking for a solution to a specifc problem. Occasionally and
for a variety of reasons, the Job queue will be have many Jobs waiting to
start while other Jobs complete and resources become available. This will
sometimes cause a job to have a StartTime hours after its SchedTime.
uptarget:C: -keepversions:0 -quiet"
2016-04-15 04:36:47mt-back4.director JobId 711684: Fatal error: Network
error with FD during Backup: ERR=Connection reset by peer
2016-04-15 04:36:47mt-back4.director JobId 711684: Error: Bacula
mt-back4.director 5.2.13 (19Jan13):
JobId:
Dear All,
I'm assuming that setting "Heartbeat Interval = 300" is the same as 5
minutes. I want to be clear on it's usage though.. it would be for when a
Firewall or Router is not honoring KeepAlive?
I'm having issues with backup failures on a mix of Windows clients.
These all seem to ha
Dear All,
I'm just wondering if there are binaries newer than 5.x available for
Windows
Thanks,
Shon
--
Site24x7 APM Insight: Get Deep Visibility into Application Performance
APM + Mobile APM + RUM: Monitor 3 App inst
change the 'InChanger' flag from a '1' to a '0' for the
> affected tapes, it at least doesn't look like there are too many of them.
> You can also delete those volumes all together if you no longer need to get
> any data from them.
>
> Bryn
>
>
Dear All,
I recently replaced a malfunctioning LTO5 TL2000 tape library with a
new LTO6 TL4000 tape library. I've been having a lot of failing tape jobs
since then, and I think I've finally rooted out the problem, but am not
sure where to begin fixing it.
Essentially, when I do a query to sh
Dear Ben,
Thank you very much. Part of my mind had wondered if it was a change
in display behavior as I only recently upgraded to 7.0. As you can see from
the configs they are all on the same SD instance. I think it doesn't
deduplicate the other Disk storage because it's using a different loc
Dear All,
I am having an issue where when I run a status command in bconsole,
select "Storage", I am only presented with the option for status on 3 of my
defined storage resources. I am trying to figure out why this is, but am
being left with a blank. Backups do seem to be running at present,
Dear All,
I'm running bacula-5.2.13 on Solaris 10 x86. Recently the bacula-dir
has begun segfaulting and crashing on my server, but I have no idea why.
I realize this is a pretty general question and I'll respond with as
much additional information as I can, but need a starting point.
I was compiling against 64-bit mysql and it didn't like that derp...
-Shon
On Thu, Dec 19, 2013 at 4:19 PM, Mingus Dew wrote:
> Dear All,
> I am compliing Bacula 5.2.13 on Solaris10. I am getting the following
> error and can't figure out what's causing it. Ca
Dear All,
I am compliing Bacula 5.2.13 on Solaris10. I am getting the following
error and can't figure out what's causing it. Can't even find where "-mt"
is coming from.
Compiling mysql.c
Making libbaccats-mysql.la ...
/root/Bacula/src/bacula-5.2.13/libtool --silent --tag=CXX --mode=link
/opt
Dear All,
I am migrating my Bacula environment to a new Solaris 10 servers. I
currently am compiled against MySQL 4.1 and running MySQL 5.1.47 as the
database.
Can anyone advise me as to what version of MySQL I should compile
against on my new server? I remember there once being some iss
Dear All,
I'm trying to figure out why it sometimes takes 40 minutes for that
status command to return results. It wasn't always this way and I'm not
sure even remotely what might be happening. This seems to be occurring even
when there are only a few (less than 10) jobs in queue. Any ideas?
Dear All,
I would like some advice on how to configure Bacula so that volumes
from my Disk pools can be read for Copying at the same time that other
volumes in the same pools are being written for backups.
Currently if there is a backup writing, none of my copy jobs will run
since the dev
Dear All,
I have a job that takes 7 days to run. Its currently in the "Dir
inserting Attributes" state. Can I remove the tapes from the library while
its in that state? Its overlapping my normal tape swap and I can't adjust
today's pickup.
Yours,
Shon
-
; Nothing has changed in that code for many years.
>
> Best regards,
> Kern
>
>
> On 07/22/2013 04:06 PM, Mingus Dew wrote:
>
> Thanks for the reply. Specifically I'm using Bacula 5.2.13 on Solaris 10
> x86. My disk backups are stored on ZFS. I saw some old threads ab
Dear Ana,
Thanks for the response. It took a few days to find this in the Inbox.
I see what you're saying. What else besides Max Volumes tells Bacula not to
label anymore. I kind of wanted it to manage that on its own, otherwise
I'll be changing that everytime I add a new client. Then of course
know this used to work for me, but doesn't seem to anymore. I'm wondering
if something happened in more recent Bacula versions that changed this
again.
*
*
Yours,
Shon* *
On Fri, Jul 12, 2013 at 3:53 AM, Radosław Korzeniewski <
rados...@korzeniewski.net> wrote:
> Hello,
>
>
Dear All,
I'm trying to understand how to properly use this directive and if its
possible to configure Bacula the way I think I can using this directive.
I'm using Version: 5.2.13 (19 February 2013) i386-pc-solaris2.10 solaris
5.10
The manual at
http://www.bacula.org/en/dev-manual/main/main/N
I don't think I've ever gotten it to work under any circumstance, either
manually or automated.
Yours,
Shon
--
See everything from the browser to the database with AppDynamics
Get end-to-end visibility with application mon
Dear All,
I am running Bacula Community Edition 5.2.13 on Solaris 10 x86. I am
trying to understand why Bacula doesn't seem to recycle when I think it
should.
I have recently moved to a configuration where each Volume contains
only a single Job. I had envisioned that when the Volume Reten
startup scripts to set the ulimit and
set and ENV variable to overcome the stdio.h limitation
Thanks
Shon
On Wed, Jun 12, 2013 at 3:32 PM, Marcin Haba wrote:
>
>
> Dnia 2013-06-10, pon o godzinie 15:55 -0400, Mingus Dew pisze:
> > :-) At first I thought you were trolling me a lit
Dear All,
I posted under another topic earlier, but since disovering that my
Director crashed, I was wondering what I can do before restarting it to
find out what happened.
Thanks,
Shon
--
This SF.net email is sponsor
:-) At first I thought you were trolling me a little, but then I looked and
sure enough, my Director has died.
How can I find out what happened?
Thanks,
Shon
On Mon, Jun 10, 2013 at 2:06 PM, Radosław Korzeniewski <
rados...@korzeniewski.net> wrote:
> Hello,
>
> 2013/6/10 Mingus
Dear All,
I'm having an issue with bconsole not being able to connect to the
Director
bconsole[18490]: [ID 702911 daemon.error] bsock.c:138 Unable to connect to
Director daemon on mt-back4.mentora.:9101. ERR=Connection refused
I *think* what has happened is that so many jobs are in queue tha
Dear All,
I've been reading the manual, but can only find 1 place where
"Catalog" is used.. in the Client definition. Obviously its defined in the
Director definition, but I can only find it used in Client.
Does anyone know anywhere else it can be used? I tried in Pool, but
that violates
Dear All,
I have an existing Bacula installation that uses separate disk pools
for Incremental and Full backups. I have setup a Copy Job to tape pool
setup using the PoolUncopiedJobs Selection Type for the Full disk pool
only.
I now wish to set this up for the Incremental pool, but only
Thanks very much for the replie and clarification. I'll be able to get to
work on this with peace of mind.
Yours,
Shon
On Tue, Jun 4, 2013 at 4:49 AM, Uwe Schuerkamp wrote:
> On Mon, Jun 03, 2013 at 03:45:48PM -0400, Mingus Dew wrote:
> > Does anyone have an example they can
Does anyone have an example they can share of using mutliple catalogs? I
have a particular set of NAS backups that has over 500,000,000 file records
and pretty much need to use a separate catalog to hopefully overcome 3 days
of table locking while inserting preventing other jobs from completing.
T
Dear All,
I am running Bacula 5.2.10. I have the following configured in
bacula-dir.conf
Statistics Retention = 90 days
However, Bacula seems to have stopped updating the JobHisto well over
a year ago. I am uncertain as to why this wouldn't be working.
Any Ideas?
Yours,
Shon
-
On Wed, Mar 20, 2013 at 05:18:37PM -0400, Mingus Dew wrote:
>> Dear All,
>> I am running bacula-5.2.10 on Solaris 10 x86. I've noticed an
>> issue recently where I've wanted to restrict further restrict the
>> Maximum Volumes in a couple of Pools.
>&g
Dear John,
Thanks for the quick response.
On Wed, Mar 20, 2013 at 5:26 PM, John Drescher wrote:
> On Wed, Mar 20, 2013 at 5:18 PM, Mingus Dew wrote:
>> Dear All,
>> I am running bacula-5.2.10 on Solaris 10 x86. I've noticed an
>> issue recently where I
Dear All,
I am running bacula-5.2.10 on Solaris 10 x86. I've noticed an
issue recently where I've wanted to restrict further restrict the
Maximum Volumes in a couple of Pools.
I edited the config and changed "Maximum Volumes = 3". I then reloaded
and updated the Pools from Resource. It says it
t 10:44 AM, John Drescher wrote:
> On Mon, Aug 6, 2012 at 10:32 AM, Mingus Dew wrote:
>> Dear All,
>> Does anyone know if its possible to run a job from Command line
>> that specifies the drive of the autochanger to be used?
>>
>
> I have a device for each o
me. It does not matter if I
> use the volume or not, but it clears the BLOCKED status.
>
> Patti Clark
> Information International Associates, Inc.
> Linux Administrator and subcontractor to:
> Research and Development Systems Support Oak Ridge National Laboratory
>
>
&
Device "TL2000_DTE1" (/dev/rmt/1cbn) is not open.
Device is BLOCKED. User unmounted.
Drive 1 status unknown.
I'm not sure why this is in this status or how to unblock.
Yours,
Shon
--
Live Security Virtual Confer
Dear All,
Does anyone know if its possible to run a job from Command line
that specifies the drive of the autochanger to be used?
Yours,
Shon
--
Live Security Virtual Conference
Exclusive live event will cover all the
Dear Bacula Users,
I have been using Bacula for about 4 years now. I recently moved
from a single drive LTO-3 Exabyte Autochanger to a 2 drive LTO-5
TL-2000 Autochanger. All the devices are recognized properly and I can
read/write from both jobs. The issue I'm having is that Bacula almost
never
Dear All,
I was hoping someone could clarify for me a few points regarding
Synthetic Jobs, Copy Jobs, and restoring from Copy Jobs
The Synthetic job uses the last Full backup and subsequent Incremental
backups to create a new "Full" backup from current Volume data into a
new Pool/Volume. Does
Dear All,
I was wondering if bacula keeps current state information in a
sql table (running jobs, status) or any other place that can be
accessed w/o bconsole? I'd like to monitor different aspects fo the
running job queue (how long job has been running, how many jobs
waiting for resources, et
Dear All,
When decommissioning a client, what is the best practice to clean
up old client, job data?
In trying to do some reporting from the database, I still see clients
that I removed from the config long ago, and job data for clients and
jobs that haven't existed in years.
Thanks,
Shon
-
Dear All,
I realize its kind of a strong subject line, but I seriously
haven't gotten the windows FD to run on any platform in a very long
time. It installs, the config looks good, but I ALWAYS on any platform
(2k, 2k3, 2k8) get error 1067 Process quit unexpectedly.
Any ideas why it doesn
Just wondering if anyone knows if the NDMP plugin will be coming to
the community release of Bacula anytime soon.
Yours,
Shon
--
Try before you buy = See our experts in action!
The most comprehensive online learning libra
Dear All,
I am currently truncating volumes on disk manually. In my disk
pools I keep 5 volumes (max volumes = 5) . Each of these volumes is
limited with max jobs = 6 * N-clients (incremental volumes) and max
jobs = 1 * N-clients (full volumes). All the volumes have the Action
On Purge value s
Dear Bacula Community,
I am seeking help from anyone who has a TL2000/4000 or other
autochanger that utilized the IBM Ultrium HH LTO-5 drives or similar
on a Solaris 10 system. I am seeking correct st.conf definition for
this drive. I have an exisiting definition for an LTO-3 drive and the
sys
Thank you
On Thu, Dec 8, 2011 at 10:20 AM, John Drescher wrote:
>> Job A in Pool A writing to Tape 0 can run at that same time as Job B
>> in Pool B writing on Tape 1
>>
> Yes. That should work (and does for me) without much fuss. You get
> into a more difficult situation if you want both drives
Dear All,
I am running bacula 5.0.3 on Solaris 10 x86. I have a Dell TL2000
24-slots Autoloader Library with 2 HH LTO5 Drives. The changer works
and the device will load tapes and write backups. However, I'm kind of
in the dark as to how to get it to use the 2nd drive. The
documentation is rea
Dear All,
I am running Version: 5.0.3 (04 August 2010) i386-pc-solaris2.10
solaris 5.10 Bacula.
I have a situation where backups are running and the client status
reports the backups as OK, but they jobs do not appear when I query
"List all backups for a Client". I know that the jobs aren't m
Dear Bacula Users,
I am running v5.0.3 on Solaris 10 x86 platform with MySQL 5.1 as the
backend. I am currently having a problem where a few very large (15 million+
files) backups to the tape device are causing disk backup jobs to fail.
89787 FullAdvisen_NFS2_AMX_Tape.2011-06-29_23.00.00
Dear All,
I recently saw that NDMP support is/was added to the Bacula Systems
Enterprise edition. When will this feature become available in the public
version?
Yours,
Shon
--
All of the data generated in your IT infr
On Wed, 4 May 2011 08:17:18 -0400
> Mingus Dew wrote:
>
> > I am trying to install the latest Win64 client downloaded from
> > bacula.org on a Windows 2008 server. The application does appear to
> > install correctly, but when trying to start the service it fails to
&g
Dear All,
I am trying to install the latest Win64 client downloaded from
bacula.org on a Windows 2008 server. The application does appear to install
correctly, but when trying to start the service it fails to start and
generates "Error 1067: The process terminated unexpectedly".
I actual
Dear All,
I am using Bacula 5.0.3 on Solaris 10_x86. I am currently having an
issue where sometimes Tape jobs are hung in queue waiting for Disk jobs to
complete. I realize this is a factor of the Concurrent Jobs setting.
However, Bacula seems to continue processing Disk jobs that were schedul
Fellow Bacula Users,
I am in search of a hardware based encryption solution that is
OS/Storage independent. Whether it be a new drive or something else even
Bacula compatible. The encryption provided within Bacula itself is not
sufficient for my needs and during my last search I was unable to
I want to setup "Synthetic" backups and write them to tape. I suspect that I
can use the "Next Pool" directive to point to a pool containing tape
volumes.
My intention is that I will be taking the last Full and subsequent
Incrementals from the Disk-To-Disk backup jobs and writing them to tape as a
Hi all,
I recently upgraded to MySQL 5.1.57 from Blastwave packages. I then
upgraded to Bacula 5.0.3
I read somewhere about a memory leak on Solaris and think I'm encountering
it. I was wondering if this is a leak in Bacula, or in MySQL.
I'm running Solaris 10 x86_64 127128-11
Basically, the
All,
I recall reading about this long ago, when I read the manual like a
book. I'm having a hard time finding the information now,
I have configured Job and File Retention periods in the Job Definitions and
then Volume Retention periods in the Pool Definitions
Job Retention = 30d
File Retent
quot; job yet.
Just curious as a fellow Solaris deployer...
Thanks,
Shon
On Fri, Oct 8, 2010 at 3:30 PM, Henrik Johansen wrote:
> 'Mingus Dew' wrote:
>
>> All,
>> I am running Bacula 5.0.1 on Solaris 10 x86. I'm currently running
>> MySQL 4.1.22 for the
Henrik,
I really appreciate your reply, particularly as a fellow
Bacula-on-Solaris user. I do not have my databases on ZFS, only my Bacula
storage. I'll probably have to tune for local disk.
Thanks very much,
Shon
On Fri, Oct 8, 2010 at 3:30 PM, Henrik Johansen wrote:
> 'Ming
?
I'm assuming I'm using batch inserts because Bacula uses a table called
'batch'
-Shon
On Fri, Oct 8, 2010 at 2:07 AM, Bruno Friedmann wrote:
> On 10/07/2010 11:03 PM, Mingus Dew wrote:
> > All,
> > I am running Bacula 5.0.1 on Solaris 10 x86. I'
All,
I am running Bacula 5.0.1 on Solaris 10 x86. I'm currently running
MySQL 4.1.22 for the database server. I do plan on upgrading to a compatible
version of MySQL 5, but migrating to PostgreSQL isn't an option at this
time.
I am trying to backup to tape a very large number of files fo
t; On 10/07/10 04:10, Ralf Gross wrote:
> > Phil Stracchino schrieb:
> >> On 10/06/10 14:35, Mingus Dew wrote:
> >>> John,
> >>> I think I had to create a bogus schedule, that bacula wouldn't
> >>> accept the job config without a schedule.
I have been using this setup for awhile. You absolutely must disable Bacula
compression on the ZFS Devices within the SD or for the specific Pools that
have volumes on the ZFS. Doubling up encryption can actually increase file
sizes and also lead to data errors.
-Shon
On Thu, Oct 7, 2010 at 2:11
John,
I think I had to create a bogus schedule, that bacula wouldn't accept
the job config without a schedule. I think I'll disable the job in bconsole
and try to start it remotely. Just see what happens...
-Shon
On Wed, Oct 6, 2010 at 2:30 PM, John Drescher wrote:
> 2010/10
I am running Bacula 5.0.1 and have a question about Disabled Jobs.
I have some jobs configured that do not have an active schedule (i.e.,
bacula never automatically queues or runs them)
Instead, these jobs are run by a remote user that logs into the backup
server and runs a script to run the confi
All,
I have ESXi 4.0 servers clustered and hosting a variety of Virtual
Machines. The VM's vary between RHEL, Solaris, Windows, and Debian. I run
various versions of the bacula-fd (5.x, 2.x, 3.x) on these VMs for taking OS
backups. No matter what the FD version though, I am seeing high IOwait
Marc,
Thanks for the tip. Is it recommended to run this daily as a runscript,
or after each job?
Thanks,
Shon
On Mon, Jun 21, 2010 at 6:22 PM, Marc Schiffbauer wrote:
> * Mingus Dew schrieb am 21.06.10 um 19:43 Uhr:
> > I am running 5.0.2 on Solaris 10 x86 edition. I upgraded
I am running 5.0.2 on Solaris 10 x86 edition. I upgraded to 5.0.2
specifically to use the Truncate volumes on purge feature.
I have setup Pool and updated volumes and followed the manual, but still my
volumes do not seem to be truncating.
I was wondering if anyone has this setup and working and co
0:00') AND Job.JobId NOT IN (SELECT
> PriorJobId FROM Job WHERE Type IN ('B','C') AND Job.JobStatus IN ('T','W')
> AND PrioJobId != 0) ORDER by Job.StartTime;
>
> Mingus Dew wrote:
>
>> In the documentation, there is an example for a
I'd like to run a Bacula Job after the successful run of another Bacula job.
Does RunAfterJob only work for external commands, or do I have to fully
define using a RunScript directive?
Thanks,
Shon
--
Return on Informatio
Thank you. Great tip. I won't implement because I'd need to update though.
But it did lead me to the right place.
-Shon
On Tue, Nov 24, 2009 at 10:16 AM, Arno Lehmann wrote:
> Hi,
>
> 24.11.2009 15:47, Mingus Dew wrote:
> > All,
> > Running Bacula 3. on Sola
All,
Running Bacula 3. on Solaris 10 x86. I'm setting up some Copy jobs
using the Selection Type = SQLQuery. When I try to test the config file I
get the error:
bac...@backup_svr: bacula-dir -t -c /opt/csw/etc/bacula/bacula-dir.conf
24-Nov 01:51 bacula-dir: ERROR TERMINATION at lex.c:270
Conf
In the documentation, there is an example for a Copy Job using the Selection
Type "PoolUncopiedJobs". I'd like to implement Copy Jobs using this
selection type. I currently have about 30 clients backed up into the same
Disk Pool. There are 28 days of backups on Disk for each client.
If I setup a C
There doesn't seem to be much in the docs on Verify Jobs, unless I'm missing
a section somewhere.
Can a Verify Job be run from the console, or does it have to be configured
in a Job Definition?
What are best practices for running Verify Jobs?
Thanks,
Shon
--
I have a need to perform a full restore and verification of the backups of 2
hosts. I'm not sure the best way to do this, or rather what best practices
are for verifying backups, their readability, and completeness.
Can anyone suggest some methods for accomplishing this?
Thanks,
Shon
-
I'd like to know the recommended way to added previously used tapes back to
the Scratch Pool.
I have already purged the jobs that were on the tapes and updated the Pool
to Scratch for each tape Volume.
For the tapes that contained data, should I rewind them manually? What about
the status? Most of
All,
Using Bacula 3.0.2 on Solaris 10_x86. I have a question regarding how
to properly recover tapes from a status of "Error". I also have some
questions on reassigning tapes from one Storage Pool to a different Pool.
I am not sure how this status came to be, but I currently have a few tapes
Yes. I'd quite forgotten about that. Do recall reading it in Changelog or
Readme...
Thanks,
Shon
On Fri, Oct 2, 2009 at 11:32 AM, John Drescher wrote:
> On Fri, Oct 2, 2009 at 10:32 AM, Christian Gaul
> wrote:
> > Mingus Dew schrieb:
> >> Enter *MediaId or Volume n
All,
I'm running Bacula version 3.0.2 for Solaris 10_x86. I'm running into an
issue since upgrading from 2.x where I cannot perform any delete or purge
operations on volumes.
I need to because for some reason I now have many volumes with status
"Error" and some volumes that need purged to clear D
All,
I have a disk volume with a status of "Error"
149 | ShopCart-FS_Full-0149 | Error | 1 | 97,820,348,233
| 22 |1,814,400 | 1 |0 | 0 | ShopCart_File |
2009-07-02 02:59:40
Just wondering what is the proper method to clear or recover from this
erro
I checked out the survey and voted for features. However, one feature I
didn't see was interfacing Bacula with Hardware Encryption capable LTO-4
drives.
This is the latest in tape tech and absolutely should be supported for a
full-featured solution.
-Shon
-
ector 2.4.4
(28Dec08): 24-Apr-2009 07:50:08
-Shon
On Fri, Apr 24, 2009 at 3:16 AM, Arno Lehmann wrote:
> Hi,
>
> 24.04.2009 01:21, Mingus Dew wrote:
> > All,
> > I'm running Bacula 2.4.4 (not gone to 3.0 just yet) on Solaris
> > 10_x86. I am having an issue wh
All,
I'm running Bacula 2.4.4 (not gone to 3.0 just yet) on Solaris 10_x86.
I am having an issue where a couple of new jobs that I've created are
hanging indefinitely (why doesn't they watchdog catch these?).
I eventually have to cancel the jobs or all the other jobs get stuck
"waiting execut
Bruno,
Not rude at all. I wouldn't have known that to be in the Manual.
Thanks,
Shon
On Tue, Feb 24, 2009 at 2:30 PM, Bruno Friedmann wrote:
> Mingus Dew wrote:
> > I've seen from time to time other people posting gdb trace output from
> > Bacula. It looks as thou
Hello All,
I've been scratching my brain but haven't figured out how to do this.
I'd like to supress email alerts from Bacula for jobs that are manually
canceled. Can anyone help?
Thanks,
Shon
--
Open Source Business
I've seen from time to time other people posting gdb trace output from
Bacula. It looks as though this was automatically generated after a problem
is encountered and then sent via bsmtp.
Is this true? If so how can I set this up?
Thanks,
Shon
--
could the director be waiting on?
-Shon
On Thu, Feb 19, 2009 at 6:12 PM, Mingus Dew wrote:
> I checked mysql during one of these jobs thats just running. For one thing,
> I can see that other jobs start, run, complete, terminate all while this
> particular job is just hanging.
>
> Wr
GP SIGNED MESSAGE-
> Hash: SHA1
>
> You should check it out with 'mysqladmin processlist' -- you may learn
> that something is going on.
>
> =R
>
> Mingus Dew wrote:
> > Sorry. I forgot to mention MySQL 4. Its still responding. I've tested it
> > w
MESSAGE-
> Hash: SHA1
>
> Mingus Dew wrote:
> > Hi all,
> > Been using Bacula 2.4.2 on Solaris 10_x86 for almost 2 years now.
> > Recently tape backups have been entering into a state that I can only
> > describe as "limbo".
> >
> >
Hi all,
Been using Bacula 2.4.2 on Solaris 10_x86 for almost 2 years now.
Recently tape backups have been entering into a state that I can only
describe as "limbo".
If I check the status of the director, I may see something like
Running Jobs:
JobId Level Name Status
All,
I am having a very strange problem. My backup server is running Bacula
2.4.2 (Solaris 10_x86) and my client is Bacula 2.2.8 (Solaris 10_x86). This
client is having intermittent job failures that I am at a loss to explain.
Here is the log output from one of the "failed" jobs. Its completin
Bacula 2.4.2 has been running generally well for me over a year now. I've
upgraded to 2.4.2 from 2 previous versions.
Lately I have been having multiple issues with Bacula losing track of tapes
in the autochanger, not being able to load tapes
that are in the changer, and just generally not working
acula-dir.state, bacula-sd.state
5. Restart bacula-dir, bacula-sd
6. Run canceled tape jobs.
-Shon
On Tue, Nov 4, 2008 at 7:31 AM, Joerg Wunsch <[EMAIL PROTECTED]> wrote:
> As Mingus Dew wrote:
>
> > I hope someone answers your question. I've seen this same issue reported
&g
I hope someone answers your question. I've seen this same issue reported my
me and others with no admission that there is a bug. I personally can't find
anything wrong with my configuration. Could you check your bacula.log for
any errors in the tape jobs prior. I've noticed that library error (mtx
I'm not entirely sure if its a Bacula specific issue, but I could use some
advice (as usual)
I'm running Bacula 2.4.2 on Solaris 10_x68 with and Exabyte LTO-3 Tape
libary. What is happening is that at some point an error occurs to the
device and then Bacula can no longer load or even determine the
I am running Bacula 2.2.7 on Solaris 10_x86. When I make changes I usually
do the following:
Edit configuration file
Test with bacula-dir -t -c bacula-dir.conf
Launch bconsole and issue "reload" command
Recently I started getting these error messages after issuing a "reload"
03-Mar 16:16 mt-back
This is great too. Thanks Brian. This actually answers a question I was
going to pose about tapes. I have some tapes that I changed pool definitions
for, but wasn't quite sure how to update that on tape.
Thanks again
On Fri, Feb 29, 2008 at 1:27 PM, Brian Debelius <[EMAIL PROTECTED]>
wrote:
> I
Thanks Arno. I just wanted confirmation from someone more experienced.
On Fri, Feb 29, 2008 at 11:55 AM, Arno Lehmann <[EMAIL PROTECTED]> wrote:
> Hi,
>
> 29.02.2008 17:30, John Drescher wrote:
> >> By changing the Volume Use Duration in the Pool config, Bacula will
> pick up
> >> the change aft
I figured out the Duration part, but I'm still not sure if this change is
the correct way to address the larger issue of jobs failing.
*query
Available queries:
1: List up to 20 places where a File is saved regardless of the
directory
2: List where the most recent copies of a file are sa
1 - 100 of 122 matches
Mail list logo
