On 2024-02-13 02:49, Eric Bollengier wrote:
Hello Peter,
Without the ReadFifo directive, it's unlikely to cause a problem,
Unlikely maybe but that is the problem and I can even reproduce it!
My setup is based on ubuntu 22.04 LTS (was trying debian but align is
broken there) using
4 drwxrwxr-x 2 sys adm 4096 May 5 2020
.zoom/reports
root@defiant1:/home/debug#
and if I send something to the pipe the job finish ok and restoring the
job did include the pipe.
/ps
On 2024-02-12 23:36, Peter Sjoberg wrote:
In short - no and no, no special files
Also
ba 4096 Apr 28 2021
/home/ba/.zoom/im
root@defiant1:~#
/ps
On 2024-02-12 20:03, Gary R. Schmidt wrote:
On 13/02/2024 11:08, Phil Stracchino wrote:
On 2/12/24 18:35, Peter Sjoberg wrote:
Hi all
I have a strange problem and (on my system) reproducible problem.
When I do backup of some d
cat /tmp/bacula-fd.trace
12-Feb-2024 18:19:18 bacula-fd: address_conf.c:289-0 Initaddr
0.0.0.0:9102 root@quark:~#
Sooo, how can I debug this? What can I do to get this working?
/ps
--
---
Techwiz, Peter Sjoberg GPG key (42DD) on
Well, in case anyone else see this - I gave up and installed ubuntu
22.04 instead of debian.
/ps
On 2023-11-23 13:31, Peter Sjoberg wrote:
Hi
I'm setting up a new backup server (to replace the current one) and
fail to get alignment plugin to work.,
I installed debian 12 and using
see that I'm the first) and what can I do to make
it work?
/ps
--
-------
Techwiz, Peter Sjoberg GPG key (42DD) on keyserver & homepage
Key fingerprint = EB81 3135 1636 576A DA83 826B 2455 0E88 42DD
Homepage:http://w
Hi Vaughan,
this article describes how to use the new methods to add gpg keys. The
best instruction I have found so far. Works from Bullseye and up.
https://www.linuxuprising.com/2021/01/apt-key-is-deprecated-how-to-add.html
Best regards,
Peter
On 05.10.2023 5:48, Vaughan Wickham wrote
st regards,
Peter
On 04.10.2023 8:31, Davide F. via Bacula-users wrote:
Hi,
There’s a specific documentation for rpm and deb Bacula installation.
https://bacula.org/whitepapers/CommunityInstallationGuide.pdf
Hope it helps
Davide
On Wed, 4 Oct 2023 at 07:36 Vaughan Wickham wrote:
Hello
Hi Radosław,
Thanks for the information. I will think about this. If the migration is
so simple, it helps a lot.
I also finally got contacted by Bacula Systems.
Best regards,
Peter
On 12.09.2023 18:38, Radosław Korzeniewski wrote:
Hello,
wt., 12 wrz 2023 o 18:24 Peter Milesson via Bacula
in our case. Another
aspect is migration. If forced to migrate our very well working Bacula
installation, there are also other backup products to consider.
Though I'm quite annoyed that Bacula Enterprises hasn't bothered to
contact me at all.
Best regards,
Peter
On 12.09.2023 18:00
this, but no
reaction so far. Hopefully, I can get some more information from the
community.
Best regards,
Peter
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
this in advance, I had to try and
reconstruct them and had set the new media type to 'File' instead of
what was in the database, namely 'File1'.
I hope my experience might save someone else similar pain.
cheers,
Peter
Bill Arlofski via Bacula-users wrote on 4/6/23 2:14 PM:
On 4/6/23 15:03
for that volume to be available for
recycling as well.
cheers,
Peter
Bill Arlofski via Bacula-users wrote on 4/6/23 12:45 PM:
On 4/5/23 15:47, Peter N. Steinmetz wrote:
So I had a very careful look through the configuration files and the
list of existing volumes and noticed that the media type
the type of 'File' to 'File1' in the director
configuration and storage configuration, it is correctly finding the
existing purged volumes and recycling them.
So bacula requires the same Media Type to correctly recycle, which I
guess makes sense.
cheers,
Peter
Phil Stracchino wrote on 3/31
Hi Matlink and Bill,
Thanks for those suggestions and explanation of why Bacula won’t automatically
label a new volume because the pool is full.
I agree that the puzzle now is why it is not recycling one of the purged
volumes in that pool?
Thanks,
Peter
peternsteinm...@steinmetz.org
ve run an estimate on this job and it lists out the
expected set of files, so the File Daemon seems fine. I was hoping this
would find and use one of the Purged volumes in the pool, but even if it
wants to create a new one, why isn't it automatically labeling?
What am I missing here?
tha
Hi folks,
I think I have got it tracked down. The backup box is a multi-homed
server and the Autochanger had got the wrong address. After changing the
address, it's working.
I will however, post a new question about configuration on a multi-homed
backup server.
Best regards,
Peter
Best regards,
Peter
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
On 26.01.2022 18:42, dmitri maziuk wrote:
On 2022-01-26 11:06 AM, Peter Milesson via Bacula-users wrote:
...
Your way of explaining the reasoning of why to use smaller file
volumes, is very appreciated.
...
The only thing I haven't found out is how to preallocate the number
of volumes
On 26.01.2022 0:02, Josip Deanovic wrote:
On 23.01.2022 11:37, Radosław Korzeniewski wrote:
Hello,
pt., 21 sty 2022 o 14:22 Peter Milesson via Bacula-users
napisał(a):
If somebody has got experience with disk based, multi volume Bacula
backup, I would be grateful about some
mental
backups, each week kept by the differental backups and the 3 full
montly too.
De : Radosław Korzeniewski
Envoyé : dimanche 23 janvier 2022 11:37
À : Peter Milesson
Cc : bacula-users@lists.sourceforge.net
Objet : Re: [Bacula-users] Virtual tapes or virtual disks
Hello,
pt., 21 sty 2022 o
On 23.01.2022 11:37, Radosław Korzeniewski wrote:
Hello,
pt., 21 sty 2022 o 14:22 Peter Milesson via Bacula-users
napisał(a):
If somebody has got experience with disk based, multi volume Bacula
backup, I would be grateful about some information (tips, what to
expect, pitfalls
On 21.01.2022 15:46, Josip Deanovic wrote:
On 2022-01-21 15:29, Peter Milesson via Bacula-users wrote:
thanks for your input. Today, I am using 160GB virtual tape volumes
with mhvtl and that seems to be a good trade off. 10GB volumes in the
new setting would be a nightmare to manage
On 21.01.2022 14:56, Josip Deanovic wrote:
On 2022-01-21 14:03, Peter Milesson via Bacula-users wrote:
Hi folks,
I am building a new backup server that is going to replace the old
one. The old backup server uses Bacula ver. 9.2.2 with a virtual tape
library (mhvtl). I have found mhvtl a bit
.
If somebody has got experience with disk based, multi volume Bacula
backup, I would be grateful about some information (tips, what to
expect, pitfalls, etc.).
Best regards,
Peter
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
On 2021-05-07 16:05, Martin Simmons wrote:
On Fri, 7 May 2021 13:40:03 +0200, Peter Milesson said:
On 2021-05-07 13:12, Martin Simmons wrote:
On Fri, 7 May 2021 12:37:32 +0200, Peter Milesson said:
On 2021-05-07 12:01, Martin Simmons wrote:
On Thu, 6 May 2021 21:54:54 +0200, Peter
On 2021-05-07 13:12, Martin Simmons wrote:
On Fri, 7 May 2021 12:37:32 +0200, Peter Milesson said:
On 2021-05-07 12:01, Martin Simmons wrote:
On Thu, 6 May 2021 21:54:54 +0200, Peter Milesson said:
On 2021-05-06 15:51, Josip Deanovic wrote:
On Wednesday 2021-05-05 20:53:42 Peter Milesson
On 2021-05-07 12:01, Martin Simmons wrote:
On Thu, 6 May 2021 21:54:54 +0200, Peter Milesson said:
On 2021-05-06 15:51, Josip Deanovic wrote:
On Wednesday 2021-05-05 20:53:42 Peter Milesson wrote:
Hi folks,
After upgrading to Bacula 9.2.2, the following backup error occurs when
the daily
On 2021-05-06 15:51, Josip Deanovic wrote:
On Wednesday 2021-05-05 20:53:42 Peter Milesson wrote:
Hi folks,
After upgrading to Bacula 9.2.2, the following backup error occurs when
the daily catalog backup is run:
[...]
The normal backups seem to terminate without any errors. It's quite
with
permissions 0750.
I assume that the MySQL database bacula is backed up in this job. If it
is so, I do not worry very much, as there is a cron job run separately,
that backs up the bacula database to an external server.
I'm grateful for any input concerning this problem.
Best regards,
Peter
Hi folks,
Answering my own question. Installing bacula 9.2.2 solved this problem.
Best regards,
Peter
On 2021-05-01 15:05, Peter Milesson wrote:
Hi folks,
When running monthly full backup on a Linux server, the following
error occurred in the final steps of the backup process, when
, and
there is no line compression, as the network connection is 10Gbits/s,
with the bottleneck being the disk subsystem on the backup server (RAID10).
Suggestions are very welcome.
Best regards,
Peter
___
Bacula-users mailing list
Bacula-users
or iptables is just a matter of personal taste/convenience.
Best regards,
Peter
On 2020-04-23 20:17, dmaziuk via Bacula-users wrote:
On 4/23/2020 7:45 AM, Martin Simmons wrote:
Check if the Centos 7.8 host is running a firewall (e.g. run iptables
-L -v).
Centos 7 installs firewalld by default
: no
Accurate: no
On 4/3/2020 5:35 PM, Peter Milesson wrote:
On 2020-04-01 11:28, Andrew Watkins wrote:
Hello,
Just started using Bacula and at this time (early stages) I find my
UNIX/Solaris full backups are running at a good speed, but our
window server is slow
ts of room for tweaking. I've been running this setup for about 9
years now, just improving the hardware now and then. Don't fix what's
working...
Best regards,
Peter
___
Bacula-users mailing list
Bacula-users@lists.sourceforge
Hello Bacula-users,
We have a CentOS server running Bacula and we want to backup Linux and Windows
servers. Currently, trying to setup the Windows client.
Bacula-enterprise 12.0.5 (on CentOS)
BWeb 12.0.5
Bacula-enterprise client 12.2.2 (on Windows)
When executing the
Hello,
Bacula Version: 9.4.4
System: CentOS 7
Server 1: Backup Storage: running DIR, SD, FD and attached to storage.
Server 2: File Server: running FD
Server 3: Mail Server: running FD
I have spent a lot of time and I finally have my Bacula system up and running.
One of my backups is
ile to move things around, as I need to
get a new server for this.
Best regards,
Peter
On 01.03.2019 17:27, Peter Milesson wrote:
Hi Josh,
With the current settings, last access updates where disabled for
Windows, and neither ATIME nor NOATIME for the Linux server. So in the
current setup, the Li
,
if it helped.
Thanks for the advice.
Best regards,
Peter
Dne 01.03.2019 v 16:40 Josh Fisher napsal(a):
I also attribute this to Windows inefficiencies, particularly in NTFS
handling of small files.However, I am not sure that those
inefficiencies explain a greater than 50% performance hit. Two
Hi Uwe,
Thanks for your input. Something similar is what I would expect. I'm
going to try some of the previous suggestions during the weekend, and
see if there are some identifiable bottlenecks.
Best regards
On 01.03.2019 14:42, Uwe Schuerkamp wrote:
I just checked our installation
Hi Heitor,
Great! See the job log below. It's the last incremental job log, but it
gives a good indication anyway (the actual Dir, Fd and Sd entries redacted).
Best regards,
Peter
28-Feb 23:05 MyDir JobId 1015: Start Backup JobId 1015,
Job=Server2017.2019-02-28_23.05.00_03
28-Feb 23:05
the VSS
snapshots is included in the total time, or if the time it takes is
significant. I guess somebody with knowledge about the inner workings of
Bacula FD could answer that question.
Best regards,
Peter
On 01.03.2019 8:35, Sergio Gelato wrote:
* Peter Milesson [2019-02-28 20:22:41 +0100
Hi Heitor,
No network bottlenecks. There isn't a single 100Mbit device in the path.
Both servers are connected to the same switch, and the path to the
backup server is 10GbE all the way.
Thanks for your input.
Best regards,
Peter
On 01.03.2019 3:12, Heitor Faria wrote:
Hello Peter
month ago, and there are no error indications. The backups
are running in the night, when there is no user activity on the network.
I'll give the large file approach a try during the weekend, and see
where it gets me.
Best regards,
Peter
___
Ba
.
But in reality, the Linux server delivers data about 7 times faster over
the network, than the Windows server.
Is this completely normal, or should I start to check up the Windows
server for problems?
Best regards,
Peter
Windows server (file server, RDP-server, Hyper-V host with 2 very
year.
Peter
On 31.12.2018 20:24, Kern Sibbald wrote:
Hello,
Yes, MariaDB is supposed to be MySQL compatible, but it is not
really. The first time that I installed MariaDB over MySQL (with lots
of problems -- best to remove MySQL and the DB first), I ran the
Bacula regression tests and MariaDB
On 14.11.2018 8:37, Radosław Korzeniewski wrote:
Hello,
wt., 13 lis 2018 o 18:20 Dmitri Maziuk via Bacula-users
<mailto:bacula-users@lists.sourceforge.net>> napisał(a):
The other issue is RAID-10 and mhvtl: if you do disk backup, why
go through the extra layer of mhvtl
On 13.11.2018 18:15, Dmitri Maziuk via Bacula-users wrote:
On Tue, 13 Nov 2018 09:47:32 -0500
Josh Fisher wrote:
On 11/13/2018 5:38 AM, Peter Milesson wrote:
Hi Markus,
I know my suggestion isn't concerning autoloaders, but it's a safe and
working alternative to tapes (and all
efficient.
Best regards,
Peter
On 13.11.2018 15:47, Josh Fisher wrote:
On 11/13/2018 5:38 AM, Peter Milesson wrote:
Hi Markus,
I know my suggestion isn't concerning autoloaders, but it's a safe
and working alternative to tapes (and all the hassles).
I setup a dedicated backup station
,
Peter
On 13.11.2018 0:34, Markus Falb wrote:
Hello,
I am considering a purchase of a relatively small autoloader, but am
not sure about compatibility with bacula.
I found this one:
https://www.overlandstorage.com/products/tape-libraries-and-autoloaders/neos-t24.aspx#Overview
If anyone
value for 'SchedTime'
When I alter the default value of ShedTime to '1970-01-01 00:00:00' this
entry works but the error occurs with the next DATETIME entry StartTime.
Could you please help me to overcome this error in Bacula.
Many thanks in advance for your help.
Bye, Peter Grupe
--
Peter Grupe
Thanks Kern. Now I will sleep much better ;-)
Peter
On 2018-01-31 11:26, Kern Sibbald wrote:
The network status command does not exist on older File daemons, which
is what the 2 Invalid command means.
Yes, you are right. New features don't work on older software.
Best regards,
Kern
to compatibility issues between the Windows
7.4.4 Bacula client and the 9.0.6 server, or is there some problem that
will jump up and bite me in the future?
Best regards,
Peter
--
Check out the vibrant tech community on one
professional help.
>
> Best regards,
> Kern
>
> On 08/03/2016 09:24 PM, Peter Szaban wrote:
> >Hello,
> >
> > I'm having trouble installing bacula 7.4.3 on a SuSE LEAP 42.1
> >64 bit system with kernel 4.1.26-21-default on an LTO6 tape
> >library.
&
Hello again,
Yesterday I posted a message describing how I was having trouble
getting bacula 7.4.3's btape fill command to work with an LTO6 tape
library.
Last night, for fun, I decided to compile bacula 5.2.3. It turns out
that btape in bacula 5.2.3 successfully completes the btape
Hello,
I'm having trouble installing bacula 7.4.3 on a SuSE LEAP 42.1
64 bit system with kernel 4.1.26-21-default on an LTO6 tape
library.
Btape's "test" and "autochanger" tests successful, but the multi-volume
"fill" test is failing. I was hoping some kind person could make some
Maybe Bacula could perform deeper inspection of the FileSet definition
and replace all the double slashes, dot and dot-dot files accordingly.
At least for the restore. This behavior may be considered as bug.
On Tue, Jun 14, 2016 at 9:17 AM, Peter Viskup <skupko...@gmail.com> wrote:
directory, dot-dot may refer to the root directory itself.
Simple test shows what's going on:
$ mkdir test
$ mkdir test/./
mkdir: cannot create directory ‘test/./’: File exists
--
Peter Viskup
On Mon, Jun 13, 2016 at 5:13 PM, bdam <bacula-fo...@backupcentral.com> wrote:
> I fixed this. F
Hello,
On 02/24/2016 05:50 PM, Heitor Faria wrote:
> *Minor correction:
>
> cat /usr/sbin/baculejo
> =>8 Cut Here >8===
> DIR_NAME=hfaria-K46CB-dir
> DIR_ADDRESS=localhost
>
> echo " Director {
> Name = $DIR_NAME
> DIRport = 9101
> Address =
ed in one config file?
>
> Hello, Peter: please read the nice manual =>
> http://www.bacula.org/5.2.x-manuals/en/main/main/Console_Configuration.html
Thanks. I did read it. As far as I can tell, the answer is "no". It is
easy to _define_ different console privilege levels, but
Hello,
Does bacula have any feature where, depending upon the UID of the unix user
executing the bconsole program, one can choose different restrictions for
the console and this would all be specified in one config file?
Thank you!
-pete
On 02/18/2016 11:15 PM, Kern Sibbald wrote:
> I rewrote large parts of fstype.c (not all) in Branch-7.4, so I recommend that
> you start by upgrading to 7.4.0. If the problem still persists, which should
> not happen, or another one shows up, please report it.
7.4.0 fixed the problem!
Thank
Hello,
On 02/18/2016 08:13 PM, Kern Sibbald wrote:
> At some point, I rewrote a good part of fstype, because one of the previous
> authors wrote code that had more than the average number of bugs that we see
> in
> Bacula.
>
> However, I do not remember rewriting that code, and from what I see
Hello,
I read the 7.2.0 codes and changed my fstype in the Options to just
be the ones that are actually supported and that I use.
However, it still faulted.
I tracked down the segfault to this line (bacula 7.2.0) fstype.c:271:
bstrncpy(ff_pkt->last_fstypename, fstype,
Hello,
I have some additional knowledge.
I thought maybe the problem was that onefs should be in the "default"
options block.
But if I change the fileset to this, the client segfaults when running
the estimate command on it:
FileSet {
Name = "Machine Heavy-Weight NO RDBMS"
Include {
Hello,
I'm using bacula 7.2.0 and I have a fileset that looks like this:
FileSet {
Name = "Machine Heavy-Weight NO RDBMS"
Include {
Options {
# DANGER: This will allow this FileSet to cross file system
# boundaries.
onefs = no
On 01/29/2016 01:56 AM, Eric Bollengier wrote:
> Hello Peter,
>
> On 01/28/2016 10:09 PM, Peter Keller wrote:
>>
>> In bacula 7.2.0, in the Options block in a FileSet, if I specify something
>> like
>> accurate=s5, in what order is it tested? I ask because I'd
Hello,
In bacula 7.2.0, in the Options block in a FileSet, if I specify something like
accurate=s5, in what order is it tested? I ask because I'd prefer the order of
check size first, then md5 sum--from the cheapest check to most expensive
check. The manual doesn't say (or I couldn't find it).
On 01/18/2016 11:29 AM, Peter Keller wrote:
> Hello!
>
> On 12/29/2015 03:12 AM, Kern Sibbald wrote:
>> The only current possibility is to not permit the help command. Making the
>> help
>> command recognized which commands are permitted would be a signi
Hello!
On 12/29/2015 03:12 AM, Kern Sibbald wrote:
> The only current possibility is to not permit the help command. Making the
> help
> command recognized which commands are permitted would be a significant project
> which is not currently on our task list. However, it would be nice if someone
Hello,
On 01/04/2016 05:49 AM, Daniel Bareiro wrote:
> Hi all and Happy New Year!!
[snip]
>> Dec 26 11:31:04 baculatest bacula-dir[3045]: Starting Bacula Director:
>> bacula-dir
>> --
>>
>> But I do not see the running processes:
On 01/04/2016 07:26 PM, Daniel Bareiro wrote:
> On 04/01/16 13:19, Peter Keller wrote:
>> since they were missing the LSB stuff and the creation of the pidfile
>> directory
>> and subsys directory. I found that they would work when tested by hand, but
>> not
>>
On 01/04/2016 09:45 AM, Daniel Bareiro wrote:
> I think LSB lines are correct:
>
>
> ### BEGIN INIT INFO
> # Provides: bacula-dir
> # Required-Start:$network
> # Should-Start: bacula-fd postgresql mysql
Shouldn't
On 01/04/2016 09:00 AM, pietersnld wrote:
> Found the same in the source code (7.2)
>
> /*
> * Given a Unix date return the week of the year.
> * The returned value can be 0-53. Officially
> * the weeks are numbered from 1 to 53 where week1
> * is the week in which the first Thursday of the
On 01/04/2016 10:19 AM, Peter Keller wrote:
> And, for me, it was postgres
I meant it was just postgresql, as in I believe you choose one or the other for
bacula.
> I believe /etc/init.d/bacula-dir is the script you are running, so:
>
> # sh -x /etc/init.d/bacula-dir
This shou
On 12/29/2015 03:12 AM, Kern Sibbald wrote:
> Hello,
>
> The only current possibility is to not permit the help command. Making the
> help
> command recognized which commands are permitted would be a significant project
> which is not currently on our task list. However, it would be nice if
Hello,
I notice in Bacula 7.2.0 that when I set up a restricted console, the help
command still gives me all commands, including the invalid ones. Is there
a way to configure bacula such that, in the context of a restricted console,
'help' will only tell me commands that I'm allowed to invoke?
On 12/26/2015 10:21 AM, Kern Sibbald wrote:
> Hello Peter,
>
> One more question: Is the client for which this Catalog error is
> occurring a Windows machine?
Nope, it is an x86_64 Linux Debian 8.0 box, technically a DomU on a Xen
Linux Debian Dom0 machine.
Thank
Hello,
I'd like to implement Copy Jobs for offsite backups and would like to know
if there is any particularly good wisdom about doing so and also in the
context of Volume sizes. I'm also interested in bandwidth limiting for said
Copy Jobs, which I see Bacula can do. Has that worked well in
Hello,
On 12/25/2015 02:01 AM, Kern Sibbald wrote:
> On 12/25/2015 08:11 AM, Kern Sibbald wrote:
>> On 12/25/2015 01:33 AM, Peter Keller wrote:
>>>> 23-Dec 18:47 DIR:xxx.yyy.zzz JobId 4: Error: Catalog error updating file
>>>> digest. bdb.h:101 Update failed: af
On 12/24/2015 02:16 PM, Kern Sibbald wrote:
> Well, 4GB Volume size seems very small to me. I would start with
> something like 50GB and possibly make them bigger if there are more than
> a few thousand Volumes.
The manual is sometimes ambiguous about things like a good Volume size.
I chose 4GB
Hello,
> 23-Dec 18:47 DIR:xxx.yyy.zzz JobId 4: Error: Catalog error updating file
> digest. bdb.h:101 Update failed: affected_rows=0 for UPDATE File SET
> MD5='oGhRwHZ+y+mWb+fv9ppFrA' WHERE FileId=6148914691236517205
Also, I just noticed, 6148914691236517205 is 0x in Hex, which
Hello,
I'm a new user who has just set up bacula on a couple of
machines. During my initial tests, things were working fine, but
when I went into production I started seeing these errors. These
errors only appear to happen when a backup is big enough to cross
volume size boundaries. (I keep my
Thank you for the replies. Seems that external script is the way to go.
Thank you,
On Sat, Mar 21, 2015 at 10:22 PM, Davide Franco bacula-...@dflc.ch wrote:
Hi Peter,
As Kern mentioned, I'd mention a shell script instead of the whole command
in the Job definition.
I do this on my jobs
.
On Thu, Mar 19, 2015 at 4:39 AM, Ana Emília M. Arruda
emiliaarr...@gmail.com wrote:
Hi Peter,
Have you checked if the job falis or not? The Client Run After Jog do not
runs if the job falis. You can use the bellow if you want that the script
runs despite of the job falis or not:
Run
.
The backup report shows that it ran the command:
18-Mar 09:39 db1-fd JobId 12980: shell command: run ClientAfterJob /bin/rm
-f /backup/daily/mysql-Slave*
Unfortunately the file is not removed.
Any idea? Is it the use of wildcard?
Thanks,
-- Peter
of these steps changed the outcome of
my restore.
Peter
On 14 January 2015 at 17:29, Peter van Heusden p...@sanbi.ac.za wrote:
No, about 900 files were marked, as can be seen in the files expected
line. I did this by marking a directory, which, as I understand it,
recursively marks everything under
No, about 900 files were marked, as can be seen in the files expected line.
I did this by marking a directory, which, as I understand it, recursively
marks everything under that directory.
Peter
On Jan 14, 2015 3:59 PM, John Drescher dresche...@gmail.com wrote:
On Wed, Jan 14, 2015 at 8:21 AM
? And is there anything that can be done to get it back?
Thanks!
Peter
--
New Year. New Location. New Benefits. New Data Center in Ashburn, VA.
GigeNET is offering a free month of service with a new server in Ashburn.
Choose
?
Thank you in advance for your answers.
--
Peter Viskup
--
Comprehensive Server Monitoring with Site24x7.
Monitor 10 servers for $9/Month.
Get alerted through email, SMS, voice calls or mobile push notifications.
Take
Right on. Thanks Martin.
After recompiling with python enabled things started working again.
On Tue, Oct 21, 2014 at 9:52 AM, Martin Simmons mar...@lispworks.com
wrote:
On Mon, 20 Oct 2014 15:40:47 -0700, Peter Wood said:
I have bacula-5.2.13 running on CentOS6 x86_64.
It's been
suspect that is what
broke things but I can't find why. All config files look good and haven't
been touched for a long time.
Any idea what could be the problem?
Thanks,
-- Peter
--
Comprehensive Server Monitoring with Site24x7
a control freak.
Anyway. Thanks for the help.
-- Peter
On Wed, Oct 1, 2014 at 2:16 PM, Roberts, Ben ben.robe...@gsacapital.com
wrote:
Hi Peter,
Bacula will always prefer to take a new volume (in Append state) rather
than reuse an existing one (in the Purged, Recycled state) so
volumes go in Scratch after retention period expire so
they can be reused by any job.
Thank you,
-- Peter
--
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compliant Status with Out
brand new volumes.
On Wed, Oct 1, 2014 at 1:07 PM, Roberts, Ben ben.robe...@gsacapital.com
wrote:
Hi Peter,
You need to set “Recycle Pool = Scratch” in your Scratch pool (and make
sure you haven’t overridden it in any other poo)l. Note that this setting
is applied to the volume when it’s
should see bacula-fd process running. I suspect bacula-fd is not
running based on what you've posted so far.
If all good so far check your firewall settings. Make sure the client
allows connection on tcp/udp port 9102.
-- Peter
On Mon, Dec 2, 2013 at 10:53 AM, Thomas Lohman thom...@mtl.mit.edu
.
Bill, great article. Thanks.
-- Peter
On Thu, Mar 28, 2013 at 12:25 AM, Geert Stappers
geert.stapp...@vanadgroup.com wrote:
Op 2013-03-27 om 13:12 schreef Paul Mather:
On Mar 26, 2013, at 11:44 PM, Bill Arlofski wrote:
On 03/26/13 22:33, Wood Peter wrote:
Hi,
I'm planning to use
is appreciated.
Thanks
-- Peter
--
Own the Future-Intelreg; Level Up Game Demo Contest 2013
Rise to greatness in Intel's independent game demo contest.
Compete for recognition, cash, and the chance to get your game
on Steam
A couple of weeks ago I decided to add the
Accurate = yes
flag to my backup jobs. I thought it shouldn't do any harm and
might make restores more precise.
This worked fine until yesterday. Yesterday, all of a sudden,
my incremental backups decided to backup ALL EXISTING FILES
(and not
Hi all,
As I feel I cannot make a vailid contribution to this mailinglist, I'd like to
unsubscribe. I have searched but can't find a way to do so. Or does the good
ol' unsubscribe in the subject field do the trick?
Best regards,
Peter van der Meulen
1 - 100 of 283 matches
Mail list logo