Re: [beagleboard] RE: DSP on beaglebone black

Hi Pedro, I have bought syba usb audio adapter similar to yours. I plugged it in but I am not able to see it on command aplay - L. Please let me know how did you figure out. Also, I would like to know how to set it as default mic in And output. Thanks. On Sep 30, 2013 11:37 PM, "Pedro A. Melendez"

[beagleboard] Saifish Porting On beagleboard

Hi all Do you know if someone have start the related work ? As I can see , Saifish is the most modern OS compare with other Linux based distribute with GUI Do someone interesting in porting this ? -- For more options, visit http://beagleboard.org/discuss --- You received this message because

[beagleboard] Beagleborad rev b6

I have a revb6 Beagleboard and looking for documentation. The nearest I can find is rev b7 that may be all I need if someone can fill me in on the difference from b6 to b7. Thanks Ron K. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are s

Re: [beagleboard] Re: BeagleBoard.org collaborates in creation of new Arduino TRE

On 10/08/13 21:48, Przemek Klosowski wrote: > On Tue, Oct 8, 2013 at 8:50 PM, Charles Steinkuehler > wrote: > >> Ah well...maybe someone will write a virtual AVR emulator for the PRU, >> then you could have *THREE* Arduino's on a Tre! > > Now this is crazy, but I think it would be useful to por

Re: [beagleboard] Re: BeagleBoard.org collaborates in creation of new Arduino TRE

On Tue, Oct 8, 2013 at 8:50 PM, Charles Steinkuehler wrote: > Ah well...maybe someone will write a virtual AVR emulator for the PRU, > then you could have *THREE* Arduino's on a Tre! Now this is crazy, but I think it would be useful to port GCC (or llvm) to PRU. It is well known that while top

[beagleboard] Re: Has any activated both user I2C buses with a DT overlay?

I'd suggest switching to the latest Robert Nelson Ubuntu 3.8 Kernel - there have been a lot of patches with DTS files for various single pin modes, so your i2c config may already be there. On Monday, October 7, 2013 5:10:14 PM UTC-4, ky...@cranehome.info wrote: > > At this point i'd almost be

Re: [beagleboard] Is it safe to power Beagleboard XM Rev B with 5V Supply of PC ATX SMPS?

As I remember , BeagleBoard Xm will have a limit of power protecter . over 5.3v or lower than 4.xv (not clear about this ) You will not be able to power up the board . TPS65930 will not power up the omap3730 ATX power 5V will always have the very big ripple . If you can boot up normally , ignore t

Re: [beagleboard] Re: BeagleBoard.org collaborates in creation of new Arduino TRE

On 10/08/13 19:31, Tim Clark wrote: > If we're doing wish lists - how about 512K of dual ported ram to connect > the two processors for some really high speed C data transfers using > structs and pointers. ROFLMAO! And how exactly do you access 512K of any kind of memory with a 16 MHz AVR (and

Re: [beagleboard] Re: BeagleBoard.org collaborates in creation of new Arduino TRE

If we're doing wish lists - how about 512K of dual ported ram to connect the two processors for some really high speed C data transfers using structs and pointers. On Thursday, October 3, 2013 7:56:07 PM UTC-4, Gerald wrote: > > USB host ports are in two connectors, 2 per connector, on the oppo

Re: [beagleboard] Re: BBB RT patch

On 10/8/13 3:25 PM, "Charles Steinkuehler" wrote: >Pull my linux-dev repo and try the new bone28 branch: > >https://github.com/cdsteinkuehler/linux-dev/tree/3.8.13-bone28-xenomai > >...this has been updated to use the just released xenomai 2.6.3, >including the ipipe and pre/post patches which n

[beagleboard] Re: BeagleBone Black peripherals

Just to clarify, there's nothing beaglebone specific about the usb peripheral compatibility. It's just a standard usb port connected to a linux computer (the beaglebone). If the device works or not depends on if your distribution has drivers for it or if you can find drivers that you can compil

Re: [beagleboard] Re: BBB RT patch

Pull my linux-dev repo and try the new bone28 branch: https://github.com/cdsteinkuehler/linux-dev/tree/3.8.13-bone28-xenomai ...this has been updated to use the just released xenomai 2.6.3, including the ipipe and pre/post patches which now work as-is with the BeagleBone 3.8.13 kernel. So no mor

Re: [beagleboard] BBB Debian and M2Tech Hiface1 ( and Real Time )

Still having an error compiling driver ... root@debian-armhf:/# sudo dkms autoinstall Kernel preparation unnecessary for this kernel. Skipping... Building module: cleaning build area. make KERNELRELEASE=3.8.13-bone20 KVERSION=3.8.13-bone20(bad exit status: 2) *Error! Bad return status

Re: [beagleboard] Debian on BBB

Cool. BTW, thanks for making these Debian images available -- and for making them so easy to use (glitches notwithstanding). Not to knock the Angstrom distribution, but Debian runs pretty well on the BBB and has a *lot *more documentation. -- For more options, visit http://beagleboard.org/di

Re: [beagleboard] Re: BBB RT patch

This is probably due to the very recent release of the newest official version of Xenomai, which includes all the necessary patches. I haven't updated my scripts to reflect this yet. The ipipe patch is now in the xenomai repository, and doesn't need to be generated from the ipipe repository any m

Re: [beagleboard] Adeno Win CE on BeagleBone Black

if you card is bigger than 2gb you cant copy it to bbb memory. But you could just load your win from the card. just turn on you bbb with out press boot botton. 2013/10/8 > Dear all > I have loaded a 4GB SD card with the MLO and EBOOTSD.nb0 and NK.bin that > comes with the Demo package (AM335X_B

Re: [beagleboard] BBB Debian and M2Tech Hiface1 ( and Real Time )

On Tue, Oct 8, 2013 at 2:31 PM, wrote: > Is it for Ubuntu or for Debian as well ? Both.. it detects the distro release from lsb_release Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are s

Re: [beagleboard] BBB Debian and M2Tech Hiface1 ( and Real Time )

Is it for Ubuntu or for Debian as well ? Max On Monday, October 7, 2013 10:33:59 PM UTC+2, RobertCNelson wrote: > > On Mon, Oct 7, 2013 at 2:40 PM, > > wrote: > > Hi all, I'm trying to install BBB Debian with well known M2Tech Hiface1 > > USB>SPDIF converter. > > > > I started with Debian 7

Re: [beagleboard] Re: BBB RT patch

Hi Charles, I downloaded your linux-dev git and checkout the 3.8.13-bone27-xenomai branch. Everything seems to work fine until I get this error: dir: xenomai - ipipe reference: v3.8.13, kernel version: 3.8.13 ipipe-core-3.8.13-x86-3.patch ipipe-core-3.8.13-arm-2.patch ipipe-core-3.8.13-blackfin-2

Re: [beagleboard] Debian on BBB

On Tue, Oct 8, 2013 at 9:12 AM, Robert Nelson wrote: > On Mon, Oct 7, 2013 at 7:37 PM, Timbo wrote: >> Okay, the scripts >> /opt/boot-scripts/am335x_evm.sh >> and >> /bin/bash /boot/uboot/tools/scripts/beaglebone-black-copy-microSD-to-eMMC.sh >> are both being triggered correctly. >> >> The probl

[beagleboard] Board hangs when start remote X11 application

Hi. I have problem running remote X11 application on beaglebone black via ssh. I have beaglebone black with display, keyboard and mouse, running original Angstrom. Network connection established via Usb WiFi adapater and doesn't have any trouble, just works fine. Board always hangs, when connec

[beagleboard] Re: SMD Circuit Design Question

Thanks for the feedback. I think for my purposes a simple buffer will work[now that I know how they work]. I want to attatch 2 BBB's to each other in a master/slave setup, so to stack them on top of each other means the board needs to reverse the P8/P9 headers[I'd make the board bigger than th

[beagleboard] BeagleBone black hang running Ubuntu X11 app over ssh

Hi. I have beaglebone black with display, Usb keyboard and mouse running original Angrstrom. When I try to start any X11 application from my other normal PC with Ubuntu 12.04 LTS (for example Nautilus) on the board remote way, it always hang. I can connect to Ubuntu in terminal mode without an

Re: [beagleboard] Re: DHT-22 and Beaglebone

You can modify this code http://www.acmesystems.it/?id=89 I have and it works on my Beaglebone black. :) On Wednesday, 28 August 2013 04:25:30 UTC+1, CJNZ wrote: > > Hi Hunyue, > > I am trying to get the SHT15 working on a classic Beagle. > I realise this is an old thread, but I am struggling a b

[beagleboard] Re: IS possible to use an LCD without controller, on the BBB?

On Sunday, October 6, 2013 7:46:49 PM UTC-4, Karl Longen wrote: > > > I wish that on the next model of BB, someone will put a programmable LCD > controller; you may not use it, but it is great to know that it is there if > needed > It HAS a programmable LCD controller. The tilcdl driver uses

Re: [beagleboard] Re: External Battery PLus charging and juice alerts

So costly, I'm eyeing this >> https://www.sparkfun.com/products/11360 have a look please and tell me, I think at 2 amps it will just give 3 hours of backup at max. but I'm fine with it because also need to consider the cost! On Tue, Oct 8, 2013 at 3:05 PM, wrote: > > > On Tuesday, October 1, 2

Re: [beagleboard] Re: OpenSSL with Crypto Acceleration on BBB

Thanks George! The haveged project looks interesting, I'll have to check it out. In the case anyone wants to help pick this up, these are my notes so far: 1. There are various documents that mention the HW_RNG.[1][2] 2. I've tried to configure the TRNG in kernel 3.8.13-bone26 and I did not see

Re: [beagleboard] Is it safe to power Beagleboard XM Rev B with 5V Supply of PC ATX SMPS?

On 10/8/2013 9:37 AM, tushar gurjar wrote: > > > Hello, > > Is it safe to power Beagleboard XM rev B with the +5V DC output of PC > ATX SMPS directly or should a linear regulated 5V supply be used > instead to be on the safer side? > > In other words, does the Beagleboard XM have circuitry to h

[beagleboard] Re: BBB 24-bit LCD using device tree

On Monday, October 7, 2013 10:31:17 AM UTC-4, bdwi...@gmail.com wrote: > > I have created a custom cape for a 24-bit LCD and am having trouble > getting the upper bits (>16) to work. I have disabled the HDMI and on > board eMMC. The panel comes up but is not showing all 24-bit color. > What v

[beagleboard] Re: Signal Processing on the BBB

Here is an example I wrote for my students that shows how to use ALSA to read in an audio signal, processes it and send it out again. fftw has been ported to the Bone. http://knez.weebly.com/2/post/2013/

[beagleboard] Re: BeagleBone Black peripherals

Here is the official list of accessories that have been verified to work with the BeagleBone Black: http://circuitco.com/support/index.php?title=BeagleBone_Black_Accessories For USB Wifi see this link: http://circuitco.com/support/index.php?title=BeagleBoneBlack#WIFI_Adapters And here is anoth

Re: [beagleboard] RE: DSP on beaglebone black

Here's an exercise I made for my students that shows how to use ALSA on a Beagle xM to read audio from an input, process it, and send it out again. It is an exercise, so you'll have to put some pieces together to make it work.

[beagleboard] Is it safe to power Beagleboard XM Rev B with 5V Supply of PC ATX SMPS?

Hello, Is it safe to power Beagleboard XM rev B with the +5V DC output of PC ATX SMPS directly or should a linear regulated 5V supply be used instead to be on the safer side? In other words, does the Beagleboard XM have circuitry to handle 5V SMPS supply input ? I want to be be very sure as

Re: [beagleboard] Re: How to open ports on compiled ubuntu-13.04-console-armhf-2013-07-22.tar.xz

On Tue, Oct 8, 2013 at 8:44 AM, Robert Nelson wrote: > On Mon, Oct 7, 2013 at 7:19 PM, Kenneth Martin wrote: >> On the "image" SD, both 22 and 80 are open, and openssh-server is running. I >> edited /etc/network/interfaces to be the same on the 'compiled version' SD, >> but no ports are open. > >

Re: [beagleboard] Debian on BBB

On Mon, Oct 7, 2013 at 7:37 PM, Timbo wrote: > Okay, the scripts > /opt/boot-scripts/am335x_evm.sh > and > /bin/bash /boot/uboot/tools/scripts/beaglebone-black-copy-microSD-to-eMMC.sh > are both being triggered correctly. > > The problem is that beaglebone-black-copy-microSD-to-eMMC.sh is failing

Re: [beagleboard] Re: How to open ports on compiled ubuntu-13.04-console-armhf-2013-07-22.tar.xz

On Mon, Oct 7, 2013 at 7:19 PM, Kenneth Martin wrote: > On the "image" SD, both 22 and 80 are open, and openssh-server is running. I > edited /etc/network/interfaces to be the same on the 'compiled version' SD, > but no ports are open. What is the "exact" file name of the one that doesn't work?

[beagleboard] Information abount FAT32 automount

Hi to everyone, i'm using BBB with angstrom 2013-06-20 distro img. I've seen that the system automatically mount FAT32 drive into media. For example, my FAT32 drive is /dev/sda and will be mounted on /medi

[beagleboard] Re: External Battery PLus charging and juice alerts

On Tuesday, October 1, 2013 2:57:39 AM UTC+8, Nishant Sood wrote: > > Anybody's running their beaglebone off of a external battery and a circuit > that can charge the same battery and also at the same time read from the > circuitry's IC that how much juice is there on the battery? > > Can you g

[beagleboard] BeagleBone Black peripherals

Hi, I would like to know where I can find BBB compatible peripherals such as USB wifi, USB HUB, touch screen or TFT monitor (4" - 7"), external power and keyboard and mouse. Thanks!! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscr

[beagleboard] Booting adeneo wince 7 on beaglebone black

Dear all I have loaded a 4GB SD card with the MLO and EBOOTSD.nb0 and NK.bin that comes with the AM335X_BeagleBoneBlack_WEC7_BIN_V0131 package from Adeno,Also I have formatted the card with Fat32 and 4096 byte sectors (using windows foarmt), and I have used the TI SD card utility for flashing t

[beagleboard] Adeno Win CE on BeagleBone Black

Dear all I have loaded a 4GB SD card with the MLO and EBOOTSD.nb0 and NK.bin that comes with the Demo package (AM335X_BeagleBoneBlack_WEC7_BIN_V0131),Also I have formatted the card with Fat32 and 4096 byte sectors (using windows foarmt), and I have used the TI SD card utility for flashing the SD

[beagleboard] Re: BBB 24-bit LCD using device tree

Ok, so I found out that fdd is the dma delay and also found the errata on 24-bit color to lcd pin mappings. That explains the colors being wrong. Still trying to find out why I can't change to 24-bit using the device tree. Any ideas? Brian On Monday, October 7, 2013 10:31:17 AM UTC-4, bd

Re: [beagleboard] Re: How to open ports on compiled ubuntu-13.04-console-armhf-2013-07-22.tar.xz

Hi Robert, pinging from a remote works fine; either with it's name (I have it in /etc/hosts on the remote), or with its IP address. ssh does not work with either, when trying ssh (or nmap or ping), I mostly use the IP address, not the name. The problem is no ports are open On 13-10-07 03:58 PM,

Re: [beagleboard] Re: How to open ports on compiled ubuntu-13.04-console-armhf-2013-07-22.tar.xz

On the "image" SD, both 22 and 80 are open, and openssh-server is running. I edited /etc/network/interfaces to be the same on the 'compiled version' SD, but no ports are open. On 13-10-07 03:59 PM, Robert Nelson wrote: On Mon, Oct 7, 2013 at 2:58 PM, Robert Nelson wrote: On Mon, Oct 7, 2013 a

[beagleboard] Re: Fast boot, no-GUI distro?

Hi! i made an Angstrom Image, well without GUI, use the Boot files on the BeagleBone demo page and just extract this image to your card. Its 2013.06 Branch Angstrom :) Do Tell me how it goes. here's the Link to my image https://docs.google.com/file/d/0B1CJYc5pls37Q3Fia1ctbmtoNWM/edit?usp=sharing

Re: [beagleboard] State of the Linux Kernel 3.12

On 08/10/13 09:32, Giuseppe Iellamo wrote: Hi all, I'm developing a setup using two BBB, one as High Level Controller / GUI and one used as Low Level Controller/motor driver board. For the GUI i would like to use some nice OpenGl accelerated GUI, and I've read in some old messages that this sh

[beagleboard] State of the Linux Kernel 3.12

Hi all, I'm developing a setup using two BBB, one as High Level Controller / GUI and one used as Low Level Controller/motor driver board. For the GUI i would like to use some nice OpenGl accelerated GUI, and I've read in some old messages that this should be integrated in 3.12 kernel. Is the

Re: [beagleboard] Re: Wifi on BBB 3.8.x - Are there drivers for any USB wifi adapters?

I am using the TP-LINK TL-WN722N without any issues. I have it on an *unpowered *hub with a Logitech C920. I am able to stream the webcam feed over wifi without problems. I have documented setting up WIFI under Arch Linux at http://blog.lemoneerlabs.com/post/The-fruits-of-my-labor At that time,

[beagleboard] Image for beagleboard xm

Hi all, I'm a newbie to all linux stuff.. so I need some help... I've compiled the u-boot and kernel using this tutorial: http://beagleboard.org/linux I was wondering how to change the lines: ~/kernel/kernel$ make ARCH=arm CROSS_COMPILE=arm-angstrom-linux-gnueabi- uImage-dtb.am335x-bone ~/kernel

[beagleboard] USB does not power ON on beagle board XM at low temperature

Hello, We are facing an issue with USB getting powered ON upon boot on beagle board XM when using Ubuntu image. Here are the details: Issue faced: USB and Ethernet does not turn ON at board power ON in Ubuntu image. This issue is seen with Ubuntu image only and not with Android image