[beagleboard] Re: SD Card as Extra Storage

Does http://dotnetdavid.wordpress.com/2013/09/28/beaglebone-black-get-more-space-from-your-sd-card/help? On Friday, May 16, 2014 5:19:08 AM UTC+1, David Song wrote: > > Hello, I am trying to use a 32GB SD card to expand my beaglebones space. > But, I am having trouble creating the partitions an

Re: [beagleboard] HC-05 Bluetooth and the beagle bone black ...

sorry for being a pest but ... probably I bite more thatn I can chew. Been looking on inet for info on that cts/rts thing and the only conclussion I get to is that ... I'm more lost now. I probably need to go down a few steps, any advice on what sort of tutorials should I take before attempt

Re: [beagleboard] Re: Beginner PRU Issue

On 5/15/2014 11:42 PM, foreverska wrote: > I found tonight someone has made a CLI debugger called prudebugger. > Beautiful piece of work. In single stepping and general breaking in my > code I realized the code was getting lost in an SBBO. When it does that it > seems to stop responding to re

Re: [beagleboard] BBB as a router w/ firewall capabilities

I can't get more than about 20Mbit/sec down with BBB as a router. I tried installing kernel 3.13.9-bone9 after reading your comment, but there is no difference. When I connect my old router, I get the 30Mbit/sec I pay for. Any ideas? Where is this ksoftirqd you speak of? I don't see it in my ru

Re: [beagleboard] BBB as a router w/ firewall capabilities

I'm not sure if you saw my original reply to this, which disappeared. In any case, I was able to max out my internet connection finally after applying the linux kernel update you suggested; before it maxed out at about 20Mbit/sec, and now I am reaching the 30Mbit/sec I pay for. However, I have

Re: [beagleboard] Re: Beaglebone Quadcopter!

I have some experience with 3g dongles on the beaglebone and they are very very unreliable. I've tried different models and they all suck. Also they are powerhungry, about 300 - 600 mAh at 5v. Depending on the state they are in idle or high power On May 15, 2014 8:45 PM, "Maxim Podbereznyy" wrote:

Re: [beagleboard] Debian Image Problems w/ APT

Great, thanks! I'll try that next time it starts locking up. Unfortunately the behavior seems a bit random at the moment, so I'm not sure when I'll actually be able to capture anything useful. For instance, it's been fine this morning. On Thursday, May 15, 2014 9:37:18 AM UTC-4, cmbaker3 wro

[beagleboard] Re: Dude, where's my BeagleBone Black?

Thanks for this informative heads-up! Does it mean that for bulk orders (we think of 1,000 or more pieces) there is no real plan how to go ahead? Of course, we would need a more or less reliable delivery slot. Or are you entering into a more widespread distribution and license scheme? Also: is R

[beagleboard] PRU pinmux mode values

Hello all, what is the correct mode value for PRU r30 (output) mode? I am finding conflicting information: http://elinux.org/Ti_AM33XX_PRUSSv2 - the table on this page lists mode 0x25 for output and 0x06 for input 0x25 would be 0x20 (IEN - input receiver enabled?) | mode 0x05 0x06 would be just

Re: [beagleboard] Using GPIO

On Thu, May 15, 2014 at 11:04 PM, Charles Steinkuehler < char...@steinkuehler.net> wrote: > On 5/15/2014 8:00 PM, Jason Kridner wrote: > > I was able to get PWM output, but I'm struggling with GPIOs for some > reason: > > > > root@beaglebone:~# dash -x `which config-pin` P9_18 out > > . > > . > >

Re: [beagleboard] Re: Dude, where's my BeagleBone Black?

I think Embest has some bulk order arrangement set up for their board. You can try them. They build their own version and we allow them to use the name and logo in their advertising and marking. But at the end of the day, it is their product. We have no plans for any different distribution scheme

[beagleboard] Announce: Flasher Changes

So while debugging an issue with the "flasher" script when flashing a large number of boards. We are yanking power when all 4 led's are on. It seems to reason, eventually the "flashing" microSD might just get corrupt. So in the interest of making the "flashing" microSD more reliable and of course

Re: [beagleboard] Trying to compile kernel for BBB, hangs on "booting the kernel"

Hi John, Thank you for the suggestion. The reason I had tried that is because I didn't know about it. I've taken a look and noticed that there is no defconfig for the beaglebone black in arch/arm/configs/ Further, there is no uImage in deploy after running the build_kernel script. I think tha

Re: [beagleboard] Trying to compile kernel for BBB, hangs on "booting the kernel"

On Fri, May 16, 2014 at 11:09 AM, Daniel Hastings < daniel.robert.hasti...@gmail.com> wrote: > Hi John, > > Thank you for the suggestion. > > The reason I had tried that is because I didn't know about it. I've taken > a look and noticed that there is no defconfig for the beaglebone black in > arch

Re: [beagleboard] Trying to compile kernel for BBB, hangs on "booting the kernel"

On Fri, May 16, 2014 at 11:16 AM, Robert Nelson wrote: > > > > On Fri, May 16, 2014 at 11:09 AM, Daniel Hastings < > daniel.robert.hasti...@gmail.com> wrote: > >> Hi John, >> >> Thank you for the suggestion. >> >> The reason I had tried that is because I didn't know about it. I've taken >> a look

Re: [beagleboard] Xenomai master -> BBB RCNelson 3.13-bone5 kernel patches

Hi, not as I wanted, ie: using the eMMC to have the best timing as possible. Le 15/05/2014 15:51, alexis.martin.1...@gmail.com a écrit : Hello dlewin555 Did you succeed in installing Xenomai on your BBB? Le lundi 10 mars 2014 14:14:59 UTC+1, dlewin555 a écrit : With the provided files i

Re: [beagleboard] Xenomai master -> BBB RCNelson 3.13-bone5 kernel patches

On Fri, May 16, 2014 at 11:31 AM, David Lewin wrote: > Hi, > > not as I wanted, ie: using the eMMC to have the best timing as possible. > Even with the 8-bit interface, the eMMC is not always the best performer. (/dev/mmcblk0 is SanDisk Ultra's in this test) root@arm:/home/debian# hdparm -tT

Re: [beagleboard] Trying to compile kernel for BBB, hangs on "booting the kernel"

Thanks Robert, I'll give it a try. On Friday, May 16, 2014 9:26:01 AM UTC-7, RobertCNelson wrote: > > > > > On Fri, May 16, 2014 at 11:16 AM, Robert Nelson > > > wrote: > >> >> >> >> On Fri, May 16, 2014 at 11:09 AM, Daniel Hastings < >> daniel.robe...@gmail.com > wrote: >> >>> Hi John, >>> >>>

Re: [beagleboard] Trying to compile kernel for BBB, hangs on "booting the kernel"

Pardon my ignorance, but how does one use a zImage with uBoot? On Friday, May 16, 2014 9:45:17 AM UTC-7, Daniel Hastings wrote: > > Thanks Robert, I'll give it a try. > > On Friday, May 16, 2014 9:26:01 AM UTC-7, RobertCNelson wrote: >> >> >> >> >> On Fri, May 16, 2014 at 11:16 AM, Robert Nelson w

Re: [beagleboard] Trying to compile kernel for BBB, hangs on "booting the kernel"

From: Daniel Hastings Reply-To: Date: Friday, May 16, 2014 at 10:06 AM To: Subject: Re: [beagleboard] Trying to compile kernel for BBB, hangs on "booting the kernel" > Pardon my ignorance, but how does one use a zImage with uBoot? If you stop at the u-boot prompt, do a printenv. You will

Re: [beagleboard] Trying to compile kernel for BBB, hangs on "booting the kernel"

Maybe this wil help some ? http://eewiki.net/display/linuxonarm/BeagleBone+Black On Fri, May 16, 2014 at 9:45 AM, Daniel Hastings < daniel.robert.hasti...@gmail.com> wrote: > Thanks Robert, I'll give it a try. > > On Friday, May 16, 2014 9:26:01 AM UTC-7, RobertCNelson wrote: >> >> >> >> >> On

Re: [beagleboard] Xenomai master -> BBB RCNelson 3.13-bone5 kernel patches

Interesting. It's the kind of test I want to implement : comparing Xenomai on Flash and SD card . Is it still better with writes operations ? Le 16/05/2014 18:38, Robert Nelson a écrit : On Fri, May 16, 2014 at 11:31 AM, David Lewin > wrote: Hi, not as I

[beagleboard] Animated face using 5 Adafruit LED matrix panels

Hi Everyone, I'm a n00b to the forums/BeagleBoards and I have a question regarding a project I'm working on. The goal is to create an animated face using 5 of the 16x32 LED matrices from Adafruit (http://www.adafruit.com/products/420). 2 of the panels will be the eyes and the other 3 are the

[beagleboard] How to check a filesystem on a remotely deployed device?

I am wondering how you would do a filesystem check (e.g. fsck) on a remote system (e.g. logged in via SSH)? You need to unmount the filesystem before checking it, but once you unmount it you have nothing left to execute from? We have a custom board based on the BeagleBone that uses ext3 on a uSD

Re: [beagleboard] Re: Beginner PRU Issue

Not the entire thing but I definitely didn't know about a SOC bridge. That section of code is a derivation on: http://boxysean.com/blog/2012/08/12/first-steps-with-the-beaglebone-pru/ Nothing is ever said about that and it worked for quite a few runs before becoming lost. However, I'm more than

Re: [beagleboard] Re: Beginner PRU Issue

In the PRU Reference Guide, see section 11.1.2 on the SYSCFG register. This is why you typically see something like the following at the start of most PRU programs: // Clear syscfg[standby_init] to enable ocp master port LBCO r0, CONST_PRUCFG, 4, 4 CLR r0, r0, 4 SBCO r0, CONST_PRU

[beagleboard] JTAG issues on BeagleBone Black

I'm trying to connect a Bus Blaster v3cto a Beagle Bone Black. I'm seeing identical output to the AM335X problem posted here: https://forum.sparkfun.com/viewtopic.php?f=18&t=35490 I'm using OpenOCD 0.8. TDO is always 1,

Re: [beagleboard] How to check a filesystem on a remotely deployed device?

google search yielded . . . http://www.cyberciti.biz/faq/linux-force-fsck-on-the-next-reboot-or-boot-sequence/ On Fri, May 16, 2014 at 2:53 PM, Fred Basset wrote: > I am wondering how you would do a filesystem check (e.g. fsck) on a remote > system (e.g. logged in via SSH)? > > You need to unmo

Re: [beagleboard] Announce: Flasher Changes

So has this change been incorporated in the latest downloadable flasher images? If so it might be a good thing to note both here and on any official wiki instructions (possibly linked to *FROM* the Download page) that images *AFTER* said date have this change. Though many do not, we ought hold pe

Re: [beagleboard] Announce: Flasher Changes

On May 16, 2014 5:49 PM, "Eric Fort" wrote: > > So has this change been incorporated in the latest downloadable flasher images? If so it might be a good thing to note both here and on any official wiki instructions (possibly linked to *FROM* the Download page) that images *AFTER* said date have t

Re: [beagleboard] How to check a filesystem on a remotely deployed device?

Thank you, damn should've found that myself. The only thing I am worried about is rebooting into fsck mode and then having it make changes and making the system unbootable. Not much I can do about that I suppose as I only have Ethernet access via a cell modem... On Fri, May 16, 2014 at 3:28 PM,

Re: [beagleboard] How to check a filesystem on a remotely deployed device?

From: Fred Basset Reply-To: Date: Friday, May 16, 2014 at 4:43 PM To: Subject: Re: [beagleboard] How to check a filesystem on a remotely deployed device? > Thank you, damn should've found that myself. > > The only thing I am worried about is rebooting into fsck mode and then having > it

Re: [beagleboard] Re: Beginner PRU Issue

Fantastic. That restored SBBO for me. Thanks a bunch! On Friday, May 16, 2014 5:11:53 PM UTC-5, Charles Steinkuehler wrote: > > In the PRU Reference Guide, see section 11.1.2 on the SYSCFG register. > > This is why you typically see something like the following at the start > of most PRU progr

Re: [beagleboard] Announce: Flasher Changes

As an alternative or maybe in conjunction you could have the 4 LED's blink together in the following order: 000111010100011101110111000111010001 (DONE) with a bit duration somewhere between 250 & 62.5 milliseconds, 1 representing on, and 0 representing off and the string repeating a number of t

[beagleboard] beaglebone black debian wheezy usb ip address change

Hi all, Does anybody know where (which file) the USB ip is set to 192.168.7.2 during boot so that I can change it? I have 10 bones and I want everyone to have its own ip. I tried /etc/network/interfaces but those entries are ignored. Thanks, Kai -- For more options, visit http://beagleboard

[beagleboard] Sending MIDI Out / Library with the BeagleBone Black ?

Hello guys, How are you? I have some previous experiences sending midi out with Arduino using the Arduino MIDI Library and was wondering how this could translate to BeagleBone Black. Is there an similar library or way of using that ardu

Re: [beagleboard] Re: Windows 8 (64bit) driver install problems

I cannot download the files you refer to On Tuesday, May 13, 2014 9:16:13 AM UTC+10, RobertCNelson wrote: > > On Mon, May 12, 2014 at 3:30 PM, > > wrote: > > Hi guys, > > > > I followed the sstep by step installation procedure to installl it > without > > the driver signature, and it in

[beagleboard] Re: Sending MIDI Out / Library with the BeagleBone Black ?

from what i could find so far i would have to use https://github.com/voodootikigod/node-serialport and write out like this: http://arduino.cc/en/Tutorial/Midi?from=Tutorial.MIDI seems very doable ( : On 17 May 2014 02:34, henrique matias wrote: > Hello guys, > > How are you? > > I have some p

Re: [beagleboard] beaglebone black debian wheezy usb ip address change

From: Kai Lehmkuehler Reply-To: Date: Friday, May 16, 2014 at 6:27 PM To: Subject: [beagleboard] beaglebone black debian wheezy usb ip address change > Hi all, > > Does anybody know where (which file) the USB ip is set to 192.168.7.2 during > boot so that I can change it? I have 10 bones

Re: [beagleboard] How to check a filesystem on a remotely deployed device?

On 5/16/2014 7:05 PM, John Syn wrote: > >> Thank you, damn should've found that myself. >> >> The only thing I am worried about is rebooting into fsck mode and then having >> it make changes and making the system unbootable. Not much I can do about >> that I suppose as I only have Ethernet access

[beagleboard] Re: UART, serial port read C/C++

hi! can you give me driver for uart? thks Vào 01:42:34 UTC+7 Thứ tư, ngày 07 tháng năm năm 2014, Andrey đã viết: > > Hello, > > I need to use an UART to communicate between beaglebone and the device. I > have written the C code, but it has a few problems within it. I can't > identify the cause o

Re: [beagleboard] How to check a filesystem on a remotely deployed device?

Yes you are correct of course. I'm just picking up the pieces from the previous developers. The next system I roll out will incorporate your suggestion. On Fri, May 16, 2014 at 7:41 PM, Charles Steinkuehler < char...@steinkuehler.net> wrote: > On 5/16/2014 7:05 PM, John Syn wrote: > > > >> Tha

[beagleboard] opkg: command not found

Hello, I just received my new element14 BeagleBone Black. I have little experience with Linux, and some experience with microcontrollers, so I got the BBB to tinker with. Right now my goal is to open a chrome browser in Linux. Since I do not have a physical HDMI connection to my monitor, I att

[beagleboard] Re: opkg: command not found

Please neglect the words after the Thanks: 2) Install any updates: opkg update 2) Install any updates: opkg updatin Apparently there was some error while typing my message. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscr