Re: [beagleboard] Latest image (bone-debian-8.2-tester-2gb-armhf-2015-11-12-2gb.img.xz) not booting on BBW (OK on BBB)

Le vendredi 15 janvier 2016 16:16:26 UTC+1, RobertCNelson a écrit : > > > > On Fri, Jan 15, 2016 at 8:53 AM, Stéphane Massot > wrote: > >> Hello, >> >> I have been working on a BBB from the 2015-11-12 image (debian 8.1). >> > > use weekly snapshots from: > > > http://elinux.org/Beagleboard:BeagleB

[beagleboard] wi-fi with beaglebone black

*root@beaglebone:~# iwconfig* wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm Retry short limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off lono wireless extensions.

[beagleboard] how to send bitstream file to FPGA from beaglebone web server

Hi I want to know is this possible to configure FPGA from beaglebone webserver by sending bitstream file. Thanks -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from thi

[beagleboard] Re: Beagle bone not network/serial accessible over USB in Mac OS X El Capitan

Thanks for posting. Hopefully this gets resolved. On Saturday, October 24, 2015 at 12:34:18 PM UTC-7, Heath Raftery wrote: > > To save others the angst, I just wanted to report that on the latest Mac > OS X (El Capitan 10.11) the Beaglebone Black is currently not usable via > the USB connection,

[beagleboard] Re: Debian 4.1.15-ti-r40 on BBB with LCD touch cursor jumping to right.

You can connect your button signals to onPressed() instead of onClicked() so it just uses the down event. That's working for me with Qt5/framebuffer/4.1 or 4.4 kernels and a 4DCape touchscreen, but the GUI for this app is pretty simple and only has buttons for user input. NewHaven capacitive t

Re: [beagleboard] How to set up multiple w1-gpio for a capeless BeagleBoneBlack?

I've come to the point where I can load the device tree and see that it is loaded. There is however no ID in /sys/devices/w1_bus_master1 Connections I have: GND = P9.1 DATA = P8.11 and VDD = P9.4 (3V3) For your info I also have a TMP36, DHT22 and BMP183 connected. They all seem to work fine. D

Re: [beagleboard] ubuntu doesnt go to desktop

Did you typed: $startx ??? But I think you should install a VNC-Server anyway 2016-01-09 16:22 GMT+01:00 : > hi guys > > I want to get ubuntu on my beaglebone black. I write image on micro sd and > after plugging beaglebone black to power its start booting. > > Afterwards i had to type in log

Re: [beagleboard] OSX el Capitan breaks HoRNDIS?

Hey Heath, I am running 10.11.1 on one laptop, and 10.11.2 on another laptop. I connected my BBB via USB, installed the drivers, attempted to SSH and was unable to connect. I also tried connecting via ethernet and using an external power supply, but for some reason I was not able to connect tha

Re: [beagleboard] Device tree overlay does not affect GPIO pin's state

1) Reboot the board 2) check whether the cape has been rightly loaded 3) if yes, check the pinmux again. Your device tree seems ok to me 2016-01-09 9:29 GMT+01:00 : > Hi all, > > I started using Beaglebone Black with Debian 7.9 for my project and I'm > trying to load my own device-tree overlay i

Re: [beagleboard] Device tree overlay does not affect GPIO pin's state

Sorry I forgot: you should check with the following command: root@beaglebone:~# cat /sys/kernel/debug/pinctrl/44e10800.pinmux/pins | grep "8a4" because you have 0x0a4 that is the offset. Ok, now you should add 44e10800 => 44e108a4 Looking for "8a4" is enough and you ll find the right pin. Pin 7

Re: [beagleboard] OSX el Capitan breaks HoRNDIS?

I connected using Ethernet after the USB failed. It worked after a couple of tries. Haven’t tried the USB again since recent OS upgrades. With the Ethernet, I had to use a separate USB supply, but no big deal. Hopefully, the issue is gone now. > On Jan 18, 2016, at 2:53 PM, joshua.a.b...@gmai

Re: [beagleboard] OSX el Capitan breaks HoRNDIS?

Joshua, Yes, it definitely worked for me on 10.11.1, but I later realised it probably had more to do with the restart than the system upgrade. I think even restarting the BBB was enough to stop it working, until the next reboot of 10.11.1. If you have a power supply and an ethernet port handy,

Re: [beagleboard] Can't connect to Beaglebone after doing a "reboot"

Yes. It does it something (more oft than wanted). The reason is that your BBB gets rebooted but in the process doesn't initialize the eth0. Check in your router and you'll see the BBB that is not able to get connected with the internet. I fixed in the following way: create a crontab with the follo

Re: [beagleboard] Re: Enable SPI interface with LCD 7 CAPE

Hi robert. Many thanks to you. I'll try it tomorrow. Best regards, Marco Em 17/01/2016 23:48, "Robert Nelson" escreveu: > On Sun, Jan 17, 2016 at 2:56 PM, wrote: > >> Hello there. > > > > I'm getting the same problem. did you find any solution for this? > > SPI0 share a line with one of the lcd

[beagleboard] Re: bbb startup fails with cape

Read BBB-SRM paragraph: 6.7 and 8.3 I drive some pins needed for the boot process Am Freitag, 12. Juni 2015 03:06:10 UTC+2 schrieb luc.d...@gmail.com: > > hello all, > I design a cape for BBB. > this cape use a lot of of bbb gpio (28 as input - opto isolated, 24 as > output - relay). > I launch s

[beagleboard] No output voltage on GPIO headers

I've messed around with device tree overlays a bit, and I'm wondering if I could have screwed something up to cause the 3.3 and 5v headers to not output voltage? Is there a way to fix this in /sys/ ? Thanks! -- For more options, visit http://beagleboard.org/discuss --- You received this mess

Re: [beagleboard] No output voltage on GPIO headers

Does the board still boot ? On 1/18/2016 2:32 PM, Sam Daleo wrote: > > I've messed around with device tree overlays a bit, and I'm wondering > if I could have screwed something up to cause the 3.3 and 5v headers > to not output voltage? Is there a way to fix this in /sys/ ? > > Thanks! > -- > Fo

[beagleboard] error while loading shared libraries BBB 4.1.12-ti-r29

*My BBB setup is as follows ...* Linux beaglebone 4.1.12-ti-r29 #1 SMP PREEMPT Mon Nov 9 22:46:19 UTC 2015 armv7l GNU/Linux BeagleBoard.org Debian Image 2015-11-12 *For whatever reason I cannot access a library (i.e. libEBBLibrary.so) and I am not sure what I am missing. Might someone offer a s

Re: [beagleboard] error while loading shared libraries BBB 4.1.12-ti-r29

On Mon, Jan 18, 2016 at 7:00 PM, Dean wrote: > My BBB setup is as follows ... > Linux beaglebone 4.1.12-ti-r29 #1 SMP PREEMPT Mon Nov 9 22:46:19 UTC 2015 > armv7l GNU/Linux > BeagleBoard.org Debian Image 2015-11-12 > > For whatever reason I cannot access a library (i.e. libEBBLibrary.so) and I > a

Re: [beagleboard] error while loading shared libraries BBB 4.1.12-ti-r29

On 01/18/2016 08:00 PM, Dean wrote: *My BBB setup is as follows ...* Linux beaglebone 4.1.12-ti-r29 #1 SMP PREEMPT Mon Nov 9 22:46:19 UTC 2015 armv7l GNU/Linux BeagleBoard.org Debian Image 2015-11-12 *For whatever reason I cannot access a library (i.e. libEBBLibrary.so) and I am not sure what

Re: [beagleboard] error while loading shared libraries BBB 4.1.12-ti-r29

Also, using LD_LIBRARY_PATH in this manner is just flat out wrong. If you have a shared library file, put it in the correct directory to begin with. On Mon, Jan 18, 2016 at 6:24 PM, Mike wrote: > On 01/18/2016 08:00 PM, Dean wrote: > > *My BBB setup is as follows ...* > Linux beaglebone 4.1.12-t

Re: [beagleboard] error while loading shared libraries BBB 4.1.12-ti-r29

On 01/18/2016 09:57 PM, William Hermans wrote: Also, using LD_LIBRARY_PATH in this manner is just flat out wrong. If you have a shared library file, put it in the correct directory to begin with. On Mon, Jan 18, 2016 at 6:24 PM, Mike > wrote: root@beaglebone:~/

Re: [beagleboard] error while loading shared libraries BBB 4.1.12-ti-r29

On Mon, Jan 18, 2016 at 9:57 PM, William Hermans wrote: > Also, using LD_LIBRARY_PATH in this manner is just flat out wrong. If you > have a shared library file, put it in the correct directory to begin with. > > On Mon, Jan 18, 2016 at 6:24 PM, Mike wrote: >> >> export LD_LIBRARY_PATH="../../li

Re: [beagleboard] error while loading shared libraries BBB 4.1.12-ti-r29

On 01/18/2016 10:14 PM, Przemek Klosowski wrote: On Mon, Jan 18, 2016 at 9:57 PM, William Hermans wrote: Also, using LD_LIBRARY_PATH in this manner is just flat out wrong. If you have a shared library file, put it in the correct directory to begin with. On Mon, Jan 18, 2016 at 6:24 PM, Mike w

Re: [beagleboard] error while loading shared libraries BBB 4.1.12-ti-r29

All said something else is going on here. libEBBLibrary.so is definitely there yet it does not take. I should mention that namespace std is being used to make updates on code easier. See code listed below. root@beaglebone:~/exploringBB/chp09/LCDcharacter# export LD_LIBRARY_PATH="~/exploringBB

[beagleboard] Updated toolchain and can't build program, can't find features.h

I just changed version of the arm toolchain to gcc-linaro-5.2-2015.11-x86_64_arm-linux-gnueabihf and a program that used to build now won't even compile now, claiming if can't find features.h. I have looked everywhere and cannot find it either. I downloaded wget -c https://releases.linaro.o