[beagleboard] Re: Beaglebone Black and RS485 Cape Interface

hello hi Travis Lytle i am using same waveshare cape to interface with my begalbone black.here i have to read can data using begalbone black but i have some questions regarding this can u please help me out?? if i use this board with my begal bone black is it possible to read CAN messages ???

Re: [beagleboard] Re: Beaglebone Black and RS485 Cape Interface

On Thu, Dec 1, 2016 at 5:06 AM, Bouni wrote: > Hi, > > thanks for your answers! > > I've searched the web yesterday in the evening for quite a long time and > stumbled up on this page: > > http://inspire.logicsupply.com/2014/09/beaglebone-rs-485- > communication.html > > If I got

Re: [beagleboard] Re: Beaglebone Black and RS485 Cape Interface

Hi, thanks for your answers! I've searched the web yesterday in the evening for quite a long time and stumbled up on this page: http://inspire.logicsupply.com/2014/09/beaglebone-rs-485-communication.html If I got it right, I can use the installed Kernel (Linux beaglebone 3.8.13-bone71.1)

Re: [beagleboard] Re: Beaglebone Black and RS485 Cape Interface

On Wed, Nov 30, 2016 at 1:21 PM, Bouni wrote: > Hi, > > indeed i want to go for Modbus TCP, but unfortunately my ventilation > system has only Modbus RTU. The BB will act as a Gateway between Modbus TCP > and Serial Modbus RTU. > Does your ventilation system output Modbus over

Re: [beagleboard] Re: Beaglebone Black and RS485 Cape Interface

Hi, I managed to get the CAN portion working following this forum . It is about the same cape. At this site , you have a document named getting started and there are

Re: [beagleboard] Re: Beaglebone Black and RS485 Cape Interface

Hi, indeed i want to go for Modbus TCP, but unfortunately my ventilation system has only Modbus RTU. The BB will act as a Gateway between Modbus TCP and Serial Modbus RTU. Am 30. November 2016 21:15:14 MEZ, schrieb William Hermans : >On Wed, Nov 30, 2016 at 11:45 AM, Bouni

Re: [beagleboard] Re: Beaglebone Black and RS485 Cape Interface

On Wed, Nov 30, 2016 at 11:45 AM, Bouni wrote: > Hi, > > I have almost the same situation. I have a Beaglebone Green and the > Waveshare RS485 CAN CAPE mentioned in the first post. > In the near future I want to use RS485 to build a Modbus TCP to Modbus RTU > Gateway to

[beagleboard] Re: Beaglebone Black and RS485 Cape Interface

Hi, I have almost the same situation. I have a Beaglebone Green and the Waveshare RS485 CAN CAPE mentioned in the first post. In the near future I want to use RS485 to build a Modbus TCP to Modbus RTU Gateway to communicate with a central ventilation system in my house. What i found out so far

[beagleboard] Re: Beaglebone Black and RS485 Cape Interface

Hi Travis, I am trying to do the same thing as you. With the Waveshare RS485/CAN cape make the CAN portion working. Could you please specify the steps you made in order to make it working? Were you using the provided image from 2013 or a clean new image? Best regards Firrel Dňa nedeľa, 9.

[beagleboard] Re: Beaglebone Black and RS485 Cape Interface

I've use the dts from waveshare website and have used the can portion of the board with no issue. http://www.waveshare.com/wiki/RS485_CAN_CAPE On Friday, September 23, 2016 at 9:10:14 AM UTC-4, sri...@faststreamtech.com wrote: > > Hi, > > I got this Beaglebone Black RS485 Cape from amazon