On 2/27/06, Dan Nicholson <[EMAIL PROTECTED]> wrote:
>
> OK, I believe you that it's a better encoder. I'll put it in the Wiki
> for now. If it becomes clear that the developer will be moving in
> this direction, I'll gladly add it to the book.
Finally got around to this. Here's the patch:
htt
On 3/15/06, DJ Lucas <[EMAIL PROTECTED]> wrote:
> Dan Nicholson wrote:
> > build of Xorg-7 with the fonts in /usr/share/X11/fonts. I won't get
>
> It's already partially in process (installing prereqs now). I'll report
> tomorrow after work, maybe sooner, but I doubt I get it done and tested
> co
Dan Nicholson wrote:
DJ,
Since you have a lot of experience here, maybe you could run a test
build of Xorg-7 with the fonts in /usr/share/X11/fonts. I won't get
there until the weekend probably.
It's already partially in process (installing prereqs now). I'll report
tomorrow after work,
On 3/15/06, DJ Lucas <[EMAIL PROTECTED]> wrote:
>
> Personally, I don't care which method is chosen so long as the TTF and
> OTF dirs are available to fontconfig. If we choose to simplify it by
> adding it directly into the X instructions, then I _like_ the RedHat
> solution suggested by Dan (/usr
What kind of inclusion issues are you having? I've never had any
problems with installing GnuTLS with the included libtasn1.
Tim
Well, this isn't a support group so I won't start detailling all the
issues I found and bore everyone on the list. Dan's right; I'll run
them with the gnuTLS
Dan Nicholson wrote:
Regardless, the fonts will be going in the X default location
($XORG_PREFIX/lib/X11/fonts) and symlinks to OTF and TTF will be made
in /usr/share/fonts. I think you, Alexander and I are in agreement
here. :-) Andrew, DJ?
Personally, I don't care which method is chosen
Dan Nicholson wrote:
> On 3/15/06, Bruce Dubbs <[EMAIL PROTECTED]> wrote:
>> Just a minor note: I'm not 100% sure but I don't think the problem is
>> bitmapped fonts, but Type 1 fonts. The documentation in fontconfig's
>> configure file indicates that bitmapped fonts are ignored by default.
>> I
The --prefix="" argument to configure causes dhcpcd's manual page to be
installed in /man instead of /usr/share/man. I suggest adding
--mandir=/usr/share/man to configure's arguments.
Tim
--
http://linuxfromscratch.org/mailman/listinfo/blfs-dev
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
U
On 3/15/06, Bruce Dubbs <[EMAIL PROTECTED]> wrote:
>
> --without-add-fonts: This
> switch disables the automatic search for X Window System fonts which,
> if found, may confuse some applications.
This is much better. I was stumped on wording at the time.
> > 3. Symlink /usr/share/fonts/X11-{OTF,
Randy McMurchy wrote:
> Should KDE be modified so that after KDE LIBS is installed the
> remaining ones are installed with the KDE prefix being discovered
> using the kde-config program installed by KDE LIBS?
>
> Something similar to this:
>
> ./configure --prefix=$(kde-config --prefix)
>
> Thi
Dan Nicholson wrote:
On 3/15/06, Marc St-Jacques <[EMAIL PROTECTED]> wrote:
Andrew Benton wrote:
What does the patch do? libtasn1 is a straight CMMI for me.
And good for you. :-) gnuTLS includes libtasn1 whithin it's source tree.
If libtasn1 isn't present, gnuTLS falls back on
On Wednesday 15 March 2006 20:44, Dan Nicholson wrote:
>...
> However,
> you have to consider blfs-support. Most of the people that ask
> support questions are not those that have the inclination to write
> scripts and figure out what's going on. They're the copy-and-pasters.
> Randy's fix help
Randy McMurchy wrote:
> Richard A Downing wrote these words on 03/15/06 11:09 CST:
>
>> There appear to be at least three kinds of so called KDE applications:
>>
>> 1) Those that use QT, but don't depend on KDE at all.
>> 2) Those that use KDE libs, but don't depend on the whole of KDE to
>> opera
On 3/15/06, Marc St-Jacques <[EMAIL PROTECTED]> wrote:
> Andrew Benton wrote:
> >
> > What does the patch do? libtasn1 is a straight CMMI for me.
>
> And good for you. :-) gnuTLS includes libtasn1 whithin it's source tree.
> If libtasn1 isn't present, gnuTLS falls back on it. But there are some
>
On 3/15/06, Thomas Trepl <[EMAIL PROTECTED]> wrote:
>
> On Wednesday 15 March 2006 17:51, Randy McMurchy wrote:
> >...
> > ./configure --prefix=$(kde-config --prefix)
> >
> Hmm, here you may assume that the install is done in the command line by using
> copy&paste from the book. I don't believe tha
Andrew Benton wrote:
Marc St-Jacques wrote:
The SSL FAQ on the gaim web site doesn't mention compiling libtasn1
before gnuTLS.
I disagree http://gaim.sourceforge.net/faq-ssl.php#q25
This info is also on the BLFS gaim page
Oh! your're right. Really missed something there. My bad, but I
Hi Randy,
On Wednesday 15 March 2006 17:51, Randy McMurchy wrote:
>...
> ./configure --prefix=$(kde-config --prefix)
>
> This way, you are essentially assured that the entire KDE
> installation will be in the correct prefix, even if someone later
> resumes installing KDE and forgets to set the $KD
On 3/15/06, Randy McMurchy <[EMAIL PROTECTED]> wrote:
>
> I'm not trying to argue with you, Dan, I'm only pointing out these items
> as I'm looking for a community decision on where we should install K3b,
> and I'm thinking these data facts may help with the decision.
Not at all. I was hoping you
Marc St-Jacques wrote:
The SSL FAQ on the gaim web site doesn't mention compiling libtasn1
before gnuTLS.
I disagree http://gaim.sourceforge.net/faq-ssl.php#q25
This info is also on the BLFS gaim page
The compiling of gnuTLS did not go well because of inclusion issues on
the libtasn1 files.
Dan Nicholson wrote these words on 03/15/06 12:30 CST:
>>I haven't tested much, but I agree with Richard that this is an app
>>that only uses kdelibs.
>
> Sorry for contradicting myself in the message. I should say that K3b
> can be built with only kdelibs. Later in the message I showed some
> i
On 3/15/06, Dan Nicholson <[EMAIL PROTECTED]> wrote:
>
> I haven't tested much, but I agree with Richard that this is an app
> that only uses kdelibs.
Sorry for contradicting myself in the message. I should say that K3b
can be built with only kdelibs. Later in the message I showed some
info that
On 3/15/06, Richard A Downing <[EMAIL PROTECTED]> wrote:
> >
> > Where should K3b be installed, /usr or $KDE_PREFIX?
>
> There appear to be at least three kinds of so called KDE applications:
>
> 2) Those that use KDE libs, but don't depend on the whole of KDE to
> operate (and none of the KDE infr
Richard A Downing wrote these words on 03/15/06 11:09 CST:
> There appear to be at least three kinds of so called KDE applications:
>
> 1) Those that use QT, but don't depend on KDE at all.
> 2) Those that use KDE libs, but don't depend on the whole of KDE to
> operate (and none of the KDE infras
On 3/15/06, Randy McMurchy <[EMAIL PROTECTED]> wrote:
>
> Something similar to this:
>
> ./configure --prefix=$(kde-config --prefix)
Sounds fine to me.
--
Dan
--
http://linuxfromscratch.org/mailman/listinfo/blfs-dev
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above inf
Just wanted to add something about gaim.
Since there was no entry for gaim in the stable BLFS book, I tried to
compile it from scratch myself (before discovering the entry in the BLFS
development book. Blah).
The SSL FAQ on the gaim web site doesn't mention compiling libtasn1
before gnuTLS.
On 3/15/06, Alexander E. Patrakov <[EMAIL PROTECTED]> wrote:
> Dan Nicholson wrote:
> > Now I'm confused. So, the effect you were after *really* was:
> >
> > 1. Configure fontconfig with --without-add-fonts
> > 2. Let X install its fonts in the default location
> > ($XORG_PREFIX/lib/X11/fonts)
>
Dan Nicholson wrote:
On 3/15/06, Andrew Benton <[EMAIL PROTECTED]> wrote:
Dan Nicholson wrote:
my plan is:
* Add --libdir=/usr/share to the Fonts section of xorg7.xml with note that
the fonts will end up in /usr/share/X11/fonts with the switch.
Won't installing the fonts in /usr/share recre
On 3/15/06, Alexander E. Patrakov <[EMAIL PROTECTED]> wrote:
> Dan Nicholson wrote:
>
> > * Add --libdir=/usr/share to the Fonts section of xorg7.xml with note that
> > the fonts will end up in /usr/share/X11/fonts with the switch.
>
> This should be tested before actually putting into the book.
On 3/15/06, Andrew Benton <[EMAIL PROTECTED]> wrote:
> Dan Nicholson wrote:
> > my plan is:
> >
> > * Add --libdir=/usr/share to the Fonts section of xorg7.xml with note that
> > the fonts will end up in /usr/share/X11/fonts with the switch.
>
> Won't installing the fonts in /usr/share recreate t
Dan Nicholson wrote:
* Add --libdir=/usr/share to the Fonts section of xorg7.xml with note that
the fonts will end up in /usr/share/X11/fonts with the switch.
This should be tested before actually putting into the book. Reason: by
installing fonts and encodings into any non-standard place,
Hello!
Here is proposition to recruite new girls any age in Ukraine. Money not
important now.
Best regards,
Dmitry
--
http://linuxfromscratch.org/mailman/listinfo/blfs-dev
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
Bruce Dubbs wrote:
DJ has been working the xorg packages pretty hard. Who wants to make
these updates? I can probably do it by the end of the week if no one
else wants to do it.
I can spare some time in the next few days.
Andy
--
http://linuxfromscratch.org/mailman/listinfo/blfs-dev
FAQ: htt
32 matches
Mail list logo
