> WRT multicast TX, this was indeed implemented on the BEE2 (I recall playing
> with this some years ago) by Jouko in 2009. Emails predate archive, from 05
> Feb 2009. I'm not sure what happened to this patch, but it's simple enough to
> re-add.
Just dug up the email. Correction and apologies,
Pretty much all the "layer 2+" switches (all the 10GbE unit that CASPERites are
using, to the best of my knowledge) support proper multicasting through IGMP
snooping. I figure we can do this setup part through the PPC without needing to
complicate the yellowblock controller with IGMP stuff. The
I just updated our old license, which had ended in Dec. 2012, by entering a
request on XUP (Xilinx University Program), and they fulfilled the request
in about 1 day. However, the license they gave me was for
UEF-VIVADO-SYSTEM-25,
which I hope includes ISE, but I fear it may not.
Nimish, did you
Hi all,
I'm upgrading xilinx 11.5 to 14.5. I downloaded the ISE Design Suite (14.5
Full Product Installation) from the following link:
http://www.xilinx.com/support/download/index.html/content/xilinx/en/downloadNav/design-tools/v2012_4---14_5.html
Is it the right and only xilinx software I need t
UNSUBSCRIBE
从我的Sony Xperia™智能手机发送
Yes, you'll need either IGMP snooping or an IGMP proxy on the switch. Most
L3 switches support IGMP snooping.
Jayanth
On Tue, Oct 1, 2013 at 1:21 PM, David MacMahon wrote:
> Hi, Jason,
>
> On Oct 1, 2013, at 4:35 AM, Jason Manley wrote:
>
> >> Ideally, the 10 GbE block would be modified to rec
Hi, Jason,
On Oct 1, 2013, at 4:35 AM, Jason Manley wrote:
>> Ideally, the 10 GbE block would be modified to recognize multicast
>> destination IP addressed and then add in the derived MAC address
>> automatically instead of getting it from the ARP table. Then it could send
>> both multicast
Hi All, I used 14.5 for a while and the only issue that I had was that
registers in one of my designs kept getting disconnected from the rest of
the design each time I opened up the model file. All other designs were
fine. This forced me back to 14.3. Although I do plan to test out 14.6 soon.
Wes
Hi all,
We were using 14.3 at the JBO workshop a few weeks ago -- partly because of
cautionary tales I heard about 14.4, and partly because of license expiry
date constraints (i.e. 14.3 was the latest version the spare Oxford
licenses supported).
Cheers,
Jack
On 1 Oct 2013 12:56, "Jason Manley"
Might be 14.5 works fine. I haven't tried it personally and I believe there
were issues with 14.4. Andrew and Paul are also on 14.3.
Jack, what were we using at the recent workshop?
Jason
On 01 Oct 2013, at 13:47 , Nimish Sane wrote:
> Really? Why does the Wiki page mention 14.5?
> https://c
Really? Why does the Wiki page mention 14.5?
https://casper.berkeley.edu/wiki/MSSGE_Setup_with_Xilinx_14.5_and_Matlab_2012b
Can someone please clarify?
Thanks a lot,
Nimish
On Tue, Oct 1, 2013 at 4:25 AM, Jason Manley wrote:
> > ...instead of 13.x, we are going for the latest 14.5.
>
> We're
> Ideally, the 10 GbE block would be modified to recognize multicast
> destination IP addressed and then add in the derived MAC address
> automatically instead of getting it from the ARP table. Then it could send
> both multicast and unicast packets.
I think this is easy, and I thought it had
> ...instead of 13.x, we are going for the latest 14.5.
We're currently on 14.3 at SKA-SA for all our ROACH-2 work. I haven't tried
14.5 but I think Wesley tried 14.4 and ran into some issues...???
Jason
13 matches
Mail list logo
