board = Zynq UltraScale+ RFSoC4x2board (Gen 3 ZU48DR)
I am in contact with a manufacturer of 100Gbe optical transceivers. For
troubleshooting, they want to see connection logs and alarms for the 100Gbe
port. I am sending data from the 100Gbe ethernet leaving the 4x2 on IP
10.17.16.20. (I am us
Ken,
The 100 GbE ethernet is not a processing system attached core in the typical
sense like your NIC on your servers. These are connected directly to the fabric
of the FPGA and are polled using their memory map register.
The 100 GbE is covered in tutorial 4 for the RFSoC tutorials. More is als
Dear Mitchell Burnett,
Thank you for the help with this matter. The manufacturer of the optical
transceiver is likely confused as to the nature of the RFSoC 4x2,
justifiably. To make some progress with them, I would need a kind of
utility for the 100Gbe port. Something which reads raw status
Ken,
I understand a bit better what you are after now. Some more information inline
below.
Best,
Mitch
On Jun 7, 2023, at 1:43 PM, Ken Semanov wrote:
Dear Mitchell Burnett,
Thank you for the help with this matter. The manufacturer of the optical
transceiver is likely confused as to the
4 matches
Mail list logo