[OSL | CCIE_Voice] CME - Unity MWI problem

Hi, I don't seem to be able to spot the problem here, any help appreciated. - Unity integration tested and working from UTIM. - 4th port set only for out MWI - CME can dial MWI on/off locally and it works - Dial into VM works fine from CME phones -

Re: [OSL | CCIE_Voice] AAR Problem!

Earlier TEHO routes were brought up. Now that you've mentioned you don't have partitions/css's can you double-check to see if you have any TEHO routes? In the event of congestion AAR kicks in and finds the best route - the TEHO route - pointing across the WAN and fails the call. What you need

Re: [OSL | CCIE_Voice] CME - Unity MWI problem

Have you run the unity diagnostic tool and can you paste the relevant config? -- MARK TURPIN | Senior Consultant - UC | Calence / Insight Networking Solutions | www.calence.com http://www.calence.com/ t. 314.656.2315 c. 314.660.5800 f. 314.656.2355 [EMAIL PROTECTED] The

[OSL | CCIE_Voice] Quick B-ACD query

Would appreciate any insight into why I am getting the following warning when doing BACD config on ISR. The warning comes when one tries to enter the param expressions under the service aa or service queue. Warning: Parameter has not been registered under yy namespace. Xxxx is

Re: [OSL | CCIE_Voice] Quick B-ACD query

This message is innocuous, disregard it. De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] En nombre de Stephen Collinson Enviado el: 17 June 2008 10:43 Para: OSL CCIE Voice Lab Exam Asunto: [OSL | CCIE_Voice] Quick B-ACD query Would appreciate any insight into why I am getting the following

Re: [OSL | CCIE_Voice] Quick B-ACD query

Thanks, much appreciated. Steve _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Christian Narvaez Sent: 17 June 2008 15:58 To: OSL CCIE Voice Lab Exam Subject: Re: [OSL | CCIE_Voice] Quick B-ACD query This message is innocuous, disregard it. De: [EMAIL

Re: [OSL | CCIE_Voice] CME - Unity MWI problem

Event log shows a collision. Checked UTIM and MWI is only box with check in it for this port. I am just in the process of flattening everything to start some new labs. I suspect it is possibly something I have been fiddling with in Unity. Will find out in a day or two with the clean setup.

[OSL | CCIE_Voice] AAR Problem!

Thanks Guys! I ll investigate more.. AH --- On Tue, 6/17/08, Turpin, Mark [EMAIL PROTECTED] wrote: From: Turpin, Mark [EMAIL PROTECTED] Subject: RE: [OSL | CCIE_Voice] AAR Problem! To: [EMAIL PROTECTED], OSL CCIE Voice Lab Exam ccie_voice@onlinestudylist.com, Jacob Owen [EMAIL

[OSL | CCIE_Voice] fr vats

I've seen in the end to end qos network design book a reference for minCIR to be CIR/2. QoS SRND page 204 says minCIR is by default CIR/2. In a thread last November VATS was brought up and the suggestion was minCIR = (95% * PVC)/2 (For 768k would = 364800). Can anyone explain why it isn't 768/2

Re: [OSL | CCIE_Voice] HW resources on gateway

Most if not all of you in the lab will see PVDM DSP's (NM-HDV) as opposed to PVDM-2 DSP's since that is what is on the CCIE-V blueprint. In this situation you HAVE TO use the naming convention I specified. Incidentally- I know Ben had mentioned about a year back on Netpro that newer pods would

Re: [OSL | CCIE_Voice] Vol1 Section 7 Task 8 : Multicast MoH

ccm-manager music-on-hold is used so that the music can be sent out to the PSTN- so this is more than likely required (although the question states that HQ and BR1 phones need to hear music so strictly speaking for this question it is not). The MOH settings in call-manager-fallback would be

[OSL | CCIE_Voice] Meet-me conference and xcoders

Scenario: x2001-- BR1rtr-WAN-HQrtr--CCM(Meet-m e) The issue is that x2007 at BR1 is running g729 across the WAN and attempting to join a meet-me conference. I had the xcoder resource allocated to both the HQ-MRG and BR1-MRG but was unable to