Hi,
In normal condition if the phones in branch cannot dial long distance call and
When Branch phones fallback to SRST and 4 digit dialling to Headquarter has to
be preserved will the restriciton for phones is applicable.eventhough 4 digit
dialling has to be preserved the call will be
Yes the restriction to the phone is still applicable. The phone should be able
to dial HQ via the SRST dial-peer , but not allowed dialling any LD
You will assign corlist local to SRST dialpeer to allow the phones to dial HQ
From: ccie_voice-boun...@onlinestudylist.com
OK if question pre-specifies H.323 IDs to be ccm_1 and ccm_2? Since both the
trunks can't have same name is this scenario valid and has any workaround.
Date: Fri, 20 Feb 2009 11:04:02 -0800
Subject: Re: [OSL | CCIE_Voice] CCM to GK trunkcan load balancing be achieved
From:
Hi List,
I want to confirm if there is a way to play MOH from BR1 flash in case Primary
MOH server is down.
thanks,
_
Chose your Life Partner! Join MSN Matrimony FREE
http://www.in.msn.com/matrimony
Hi Kapil
Here is a link that will help you:-
http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_feature_guide09186a00802d1c31.html#wp1118060
Regards
- Basant
On Wed, Feb 25, 2009 at 12:44 PM, Kapil Atrish kapilatr...@hotmail.comwrote:
Hi List,
I want to confirm if there is a
Thanks man for your quick reply.
Actually BR1 is not in SRST mode. I am playing multicast MOH from Router's
flash.
Let's say I am using Multicast IP/base port of Sub and sub goes down, is it
possible for BR1 to continue playing multicast MOH from its flash.
I couldn't find a wayout to make
Kapil,
I haven't tested this but .
If Sub unicast to BR1 than you can easily achieve this by spoofing the PUB
multicast add and have PUB ur second choice for MOH for Branch and have
multicast hop of 1, and config multicast MOH under call-manager-fall
Assuming you are trying to achieve
Kapil correction. No need of route filers, You can have PUB Hop count to 1 in
that case 239.1.1.1 will never reach Branch.
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Kumar, Narinder
Sent: Thursday, 26 February 2009 12:04 AM
To:
Yeah but once Sub is offline, the Multicast Address configured at BR1 is not
active. How do I point it to Pub dynamically.
I tried giving same Address to Pub/Sub and changing Base port 16384 and 16386
but haven't worked since BR1 is still configured for Sub Multicast IP and port
no.
Is there
Why do you give the same add to pub and Sub ? Trying giving pub and sub
different multicast base address
From: Kapil Atrish [mailto:kapilatr...@hotmail.com]
Sent: Thursday, 26 February 2009 12:28 AM
To: Kumar, Narinder; basant.ya...@gmail.com
Cc: ccie_voice@onlinestudylist.com
Subject: RE: [OSL
One of the labs has a configuration where two phones are configured with a
shared line and barge in. The restriction is that one phone can always barge
in, while the other never can.
The solution guide shows setting privacy options on the line as well as turning
on the built in bridge on the
Hello All Im testing this scenario: Assistant dn 2003, css-br1-all,location
BR1, AAR group BR1, external phone number mask 617522proxy line 2560,
css-ipma(pt-manager,pt-internal),location BR1, AAR group BR1, external phone
number mask 617522Route Point
Without AAR everything works fine- Mensaje original -De: DIEGO FERNANDO
MACIAS SANCHEZ dmac...@javeriana.edu.coFecha: Miércoles, 25 de Febrero de
2009, 12:18 pmAsunto: [OSL | CCIE_Voice] IPMA AAR configurationA:
ccie_voice@onlinestudylist.com Hello All Im testing this scenario:
Anyone happen to know if Cisco VG200 voice gateway support CME (Cisco manager
express)?
I found in Cisco IOS software centre, it has only MGCP/H323 software feature.
Regards,
James
_
Show them the way! Add maps and directions
Use a softkey template on the never can phone with the Barge and
cBarge Softkeys removed...
Kevin S. Porter
Systems Engineer L4
kpor...@netelligent.com mailto:kpor...@netelligent.com
(p) 314.392.6921
(f) 314.392.5421
http://www.netelligent.com/
From:
I would think that if the scenario allowed the use of the built-in
bridge that your solution would be ok. Since the Standard softkey
template, does not have the cBarge key by default, then this would
block the ability to barge from the phone without the built in bridge.
If cBarge is in the
Hi,
Personally, I found myself drawing and writing down always the same data
at the same place on the paper. For example, I put the Ip address on the
top and the loopback address on the bottom of the boxes representing my
routers and so on. I always write the specs for each section at the same
Kapil,
Post your config of BR1.
On Wed, Feb 25, 2009 at 7:40 AM, Kumar, Narinder narinder.ku...@uxcg.com.au
wrote:
Why do you give the same add to pub and Sub ? Trying giving pub and sub
different multicast base address
*From:* Kapil Atrish [mailto:kapilatr...@hotmail.com]
*Sent:*
Cliff,
When you dial the international number with #, it will conclude that's the
route pattern to take and Call Manager will not send the #.
Question 2, you can used either as long as TEHO works.
On Tue, Feb 24, 2009 at 12:28 PM, Cliff McGlamry cl...@mcglamry.net wrote:
Two questions about
Nope. No problem with your solution Cliff or Kevin's solution. They
all three achieve the same end goal. The lab is the same way and
grading is done by VERIFICATION not by looking at CONFIGURATION.
So long as no restrictions were presented (either in the same question
or even in a question
What is the total time you spend drawing and doing the call routing table?
- Original Message -
From: Sandy Lee
To: Cliff McGlamry
Cc: ccie_voice@onlinestudylist.com
Sent: Wednesday, February 25, 2009 4:28 PM
Subject: RE: [OSL | CCIE_Voice] Time management strategies
I have noticed that when calling from CCM to CME and the call then forwards to
CUE, for some reason if the calling phone is an IP Blue phone, I get no audio
and the call drops. This sounds strangely familiar to the situation someone
else posted about last week.
I went back through my notes on
In testing teho, I've found that there is a bit of a problem.
My route patterns that recognize BR2 extensions are also thinking that the PSTN
Spain extension is a BR2 extension and stripping it down. Has anyone else seen
this? Do you just need to get more specific with the internal
23 matches
Mail list logo
