[OSL | CCIE_Voice] Cisco Phones - 7960/7961

Guys - I don't believe this is an illegal post. I have two Cisco IP Phones for sale. I have a 7961 and a 7960. Both are like new. If interested, shoot me an email. Thanks! -- Matthew Berry /A+, CCENT, CCNA, CCNA Voice, CCVP, CCIE Written/ *Gmail:* ciscovoiceguru *Skype:* ciscovoicegur

Re: [OSL | CCIE_Voice] 7975 Firmware file not loading

After adding the new firmware device pack the the CUCM, did you restart the TFTP service(s)? --- Amy Ryan ­ CCIE #24677 (Voice) Technical Instructor - IPexpert, Inc. Mailto: ar...@ipexpert.com Telephone: +1.810.326.1444 Live Assistance, Please visit: www.ipexpert.com/chat

Re: [OSL | CCIE_Voice] Please Help: cannot select octo-line

Must be an IOS bug or something like that :S -- Dew Swen CCVP, CCNP On 4/13/2010 8:02 PM, Arnold Schwarzeneger wrote: Hi all, I have CME7.0(1) up and running. I wanted to start configuring an octo line, but all I see is the "dual-line" option: Router(config)#ephone-dn 1 ? dual-line dua

Re: [OSL | CCIE_Voice] Please Help: cannot select octo-line

Sure it's cucme 7.0? What version of IOS do you have? Sent via BlackBerry from T-Mobile -Original Message- From: Arnold Schwarzeneger Date: Wed, 14 Apr 2010 01:02:12 To: Subject: [OSL | CCIE_Voice] Please Help: cannot select octo-line ___

[OSL | CCIE_Voice] Please Help: cannot select octo-line

Hi all, I have CME7.0(1) up and running. I wanted to start configuring an octo line, but all I see is the "dual-line" option: Router(config)#ephone-dn 1 ? dual-line dual-line DN (2 calls per line/button) Router(config)#ephone-dn 10 ? dual-line dual-line DN (2 calls per line/button)

[OSL | CCIE_Voice] 7975 Firmware file not loading

Hi all, One of our customer had an issue with his 3x 7975 phones. The phones are showing an incorrect time (they are showing GMT) while all other phones in the same device pool are showing correct time BST (GMT+1). I looked at the display debugs of the phone and found that its looking for the

Re: [OSL | CCIE_Voice] OSL CUCM DHCP Server

Seems that the devil is in the details ;-) I was making the DHCP Network Address as A.B.C.1 /24 instead of A.B.C.0/24 I have tried to regenerate the issue and 2 times I have been able to generate and resolve the issue, hence for now it looks that that's the issue. Thanks everyone for the genero

Re: [OSL | CCIE_Voice] OSL CUCM DHCP Server

I had a similar problem and found that I had forgotten to put a default gateway in my scope. In that case you would see the offer, the phone would accept it, but then it wouldn't complete the accept, because the acceptance wouldn't make it to the server without a default gateway. Another stupi

Re: [OSL | CCIE_Voice] OSL CUCM DHCP Server

Yes, the DHCP Server is on the Pub, checked everything.. Let me redo the whole configuration once again, may be I missed something Regards From: bkvalent...@gmail.com [mailto:bkvalent...@gmail.com] Sent: Tuesday, April 13, 2010 3:21 PM To: anil batra; Samuel, Wilson; ccie_voice-boun...@onlinest

Re: [OSL | CCIE_Voice] OSL CUCM DHCP Server

Also, your dhcp server is the Pub, correct? Sent via BlackBerry from T-Mobile -Original Message- From: anil batra Date: Tue, 13 Apr 2010 12:19:58 To: ; ; ; Subject: Re: [OSL | CCIE_Voice] OSL CUCM DHCP Server Make sure you have DHCP monitor service ON on CUCM. --- On Wed, 4/14/10, b

Re: [OSL | CCIE_Voice] OSL CUCM DHCP Server

Make sure you have DHCP monitor service ON on CUCM. --- On Wed, 4/14/10, bkvalent...@gmail.com wrote: From: bkvalent...@gmail.com Subject: Re: [OSL | CCIE_Voice] OSL CUCM DHCP Server To: wilson.sam...@usc-bt.com, ccie_voice-boun...@onlinestudylist.com, ccie_voice@onlinestudylist.com Date: Wed

Re: [OSL | CCIE_Voice] OSL CUCM DHCP Server

This may seem silly, but it slips the mind sometimes. Did you remember to configure the switchports with the proper vlans? -Original Message- From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of wilson.sam...@usc-bt.com Sent: Tuesday, A

Re: [OSL | CCIE_Voice] OSL CUCM DHCP Server

Thanks for your response. Yes, the ip helper address is correct, infact on the router I do see that phone is looking for a DHCP Server, however the Server seems to be silent. I'm really stuck on this and don't seem to get any clue to get out of this. It must be something really silly, that I'm

Re: [OSL | CCIE_Voice] OSL CUCM DHCP Server

Have IP helper address pointing to the CUCM Pub IP? Make sure the default gateway offered is correct. I won't tell you how I learned that one. Brian Sent via BlackBerry from T-Mobile -Original Message- From: Date: Tue, 13 Apr 2010 13:55:51 To: Subject: [OSL | CCIE_Voice] OSL CUCM

Re: [OSL | CCIE_Voice] OSL CUCM DHCP Server

For some reason, I have seen the same issue if I enable the Option 150 on both the Server and the Pool. Try not to duplicate the options or configuration. Then restart DHCP Monitoring and the Call Manager Service. -Original Message- From: wilson.sam...@usc-bt.com To: ccie_voice@onli

[OSL | CCIE_Voice] OSL CUCM DHCP Server

Hi All, I'm trying to setup DHCP Server on CUCM (ver 7.0 ), however for some reason its not offering any ACK or DHCPOFFR for any DHCP Request on the network. I have already disabled CSA on the CUCM, anything else I missed? Appreciate any help on the aspect. Kind Regards Wilson Samuel _

Re: [OSL | CCIE_Voice] CUBE hold-resume issue

Hello Angel Can you tell us whether or not you have MTP checked in your gK controlled trunk and a MTP resource available for it to invoke. Thanks On Wed, Apr 14, 2010 at 2:33 AM, Angel Perez wrote: > Hi all: > > I've the following scenario: > > sip phone(3001)---cme---cube---ccm---sip phone(1

Re: [OSL | CCIE_Voice] CUBE hold-resume issue

Do you have 'midcall signaling pass-thru' turned off? Jeff From: Angel Perez [mailto:gorr...@hotmail.com] Sent: Tuesday, April 13, 2010 10:15 AM To: Jeff Spronk (jespronk); osl osl Subject: RE: [OSL | CCIE_Voice] CUBE hold-resume issue Hello Jeff: 12.4(20)T2 Thanks

Re: [OSL | CCIE_Voice] CUBE hold-resume issue

Hello Jeff: 12.4(20)T2 Thanks Subject: RE: [OSL | CCIE_Voice] CUBE hold-resume issue Date: Tue, 13 Apr 2010 08:06:29 -0700 From: jespr...@cisco.com To: gorr...@hotmail.com; ccie_voice@onlinestudylist.com Hi Angel, What version of IOS are you running? Jeff From: ccie_voice

Re: [OSL | CCIE_Voice] CUBE hold-resume issue

Matthew: This is my home lab, all phones are sip right now, but I can test it tomorrow hq gw is mgcp, but I think that this doesn't matter becouse is a gk call so the call comes in to ccm trough gk trunk, not registered gw. Regards Date: Tue, 13 Apr 2010 10:01:49 -0500 From: cis

Re: [OSL | CCIE_Voice] does CME support + sign?

Matthew, You are correct, a voice translation rule appending the + sign will do it. Amp Quoting Matthew Berry : > Wouldn't it depending on what protocol you were using on the CUCME > side? For example, H.323 does not support the + character. Therefore, > you'd need to setup a voice translation

Re: [OSL | CCIE_Voice] does CME support + sign?

Wouldn't it depending on what protocol you were using on the CUCME side? For example, H.323 does not support the + character. Therefore, you'd need to setup a voice translation rule on the voice-port to append a + to all incoming calls. I'd prefer the voice translation rule on the voice-port

Re: [OSL | CCIE_Voice] does CME support + sign?

Anupam, I do not recall seeing that '+ Dialing' was supported in CME when I read through the CME SRND. Amp Quoting anupam TYAGI : > Does cme version 7.0 support + sign. i can see in the isdn debug that the > calling number is coming with + , but on the missed or received call it is > with out

[OSL | CCIE_Voice] does CME support + sign?

Does cme version 7.0 support + sign. i can see in the isdn debug that the calling number is coming with + , but on the missed or received call it is with out +.. Is there any way to achieve it ___ For more information regarding industry leading CCIE Lab

Re: [OSL | CCIE_Voice] CUBE hold-resume issue

Hi Angel, What version of IOS are you running? Jeff From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Angel Perez Sent: Tuesday, April 13, 2010 8:33 AM To: osl osl Subject: [OSL | CCIE_Voice] CUBE hold-resume issue Hi all: I've

Re: [OSL | CCIE_Voice] CUBE hold-resume issue

Angel - Does the performance differ if you use a CUCM-register SCCP phone? What kind of gateway protocol is used at the CUCM side? If it's ProctorLabs, I'm guessing H.323? Matthew Berry /A+, CCENT, CCNA, CCNA Voice, CCVP, CCIE Written/ *Gmail:* ciscovoiceguru *Skype:* ciscovoiceguru *Tw

[OSL | CCIE_Voice] CUBE hold-resume issue

Hi all: I've the following scenario: sip phone(3001)---cme---cube---ccm---sip phone(1001) These three gws (cme, cube, ccm) are registered to hq gk Calls are working as expected, (codec, etc) the only thing that doesn't work is that when I've a call between 1001 and 3001 I can hold

Re: [OSL | CCIE_Voice] Forward Unregistered in SRST

Make sure the Forward all check box is not checked so you not fwd to vm. Have you tried to run debug isdn q931 on hq GW to make sure it recieve a call from cucm. On Tue, Apr 13, 2010 at 1:04 PM, Omotayo wrote: > Hello, > > i have configured SRST FOR Br1 so that hq and br2 phones can call it whe

Re: [OSL | CCIE_Voice] Unity Connection Timezones

Hello Ken, 1) This is the time zone used for OS, traces, etc 2) This will be used for user and features withing UC application itself. This timezone is the default timezone schedules use for call handlers, users, etc, hth, On Fri, Apr 9, 2010 at 10:40 AM, Ken Kov wrote: > Can someone tell me

Re: [OSL | CCIE_Voice] Lets put together Calling party transformation pattern on UCM 7.0.1 behaviour

Hello Jeremy, I think that an important fact to know is that cg/cd xform patterns get matched at the time the rp is being hit, so cg/cd xforms will override the transformations you perform at the rp level, If you configure the EPNM in a TP, the cg number getting to the rp will be the globalized n

Re: [OSL | CCIE_Voice] Forward Unregistered in SRST

Hello, i didnt uncheck it. i guess that might be the problem Thanks, will check and let you have the feedback Regards On Tue, Apr 13, 2010 at 11:36 AM, wrote: > Hello, > > Make sure the vm checkbox is not checked for the cfur internal line > configuration this takes precedence over the cfur s

Re: [OSL | CCIE_Voice] Forward Unregistered in SRST

Hello, Make sure the vm checkbox is not checked for the cfur internal line configuration this takes precedence over the cfur specific configuration, -Original Message- From: Omotayo Date: Tue, 13 Apr 2010 11:04:59 To: OSL Group Subject: [OSL | CCIE_Voice] Forward Unregistered in SRST

[OSL | CCIE_Voice] Forward Unregistered in SRST

Hello, i have configured SRST FOR Br1 so that hq and br2 phones can call it when unregistered from UCM( in SRST). i have the CSS as CSS-FUR with partition pt-fur i created a route pattern \+.1617! in pt-fur i have the number +16178631002 assigned whenn unregistered When i enable the SRST, it sh

[OSL | CCIE_Voice] Looking for a study partner / CCIE Voice lab (I have a full lab)

Hi everyone, I am looking for a study partner for the CCIE Voice Lab. I have a full lab willing to provide access to right study partner. You can e-mail me at: olliej1974 [at] yahoo [dot] com Thanks ___ For more information regarding industry

Re: [OSL | CCIE_Voice] Vol 2 Lab 10 Q4.6 - VoiceView and CUCM - Authentication Error

Thanks for that info Amy. I found a link that should be helpful. http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_tech_note09186a008067cb94.shtml Amp Quoting Amy Ryan : > Hello Sergio, > > Thank you for bringing to our attention that the solution was missing. This > has now been