Do you have access to the device you are calling ?
Are you sure it is setup and ready to receive the call ?
Call it from a handset - you should hear it ring even if the call cannot
complete as it's ISDN end to end
The problem may be with the provider but it could also be with the terminating
Dear Graham ,
I am calling remote device , i am trying to call on the same router where
pri is terminated.
with command isdn test call interface serial0/1/0:15
but getting the error no route to destination
while debugging isdn standard and q321 .
I tried google that says This
So if I get this correct you are trying to get the router to call itself using
the test call command and the service provider isn't routing the call back to
you.
If you call this number from a handset do you see the call reaching the router
when debugging Q.931 ?
Regards
Graham
On 23
Is it possible to change the PSTN dialplan on the IPEXPERT equipment. If so
how can I find information on how to do this..For example instead of using
the dialing plan for SPAIN and the other 2 USA cities. Can I choose another
country and 2 other USA cities..I have found that by randomly changing
Hi all,
Its time for me to do the recert for Voice written.
Can you please what are the correct materials for
the written exam.?
I believe the written has changed since last year so i am not sure what is
the
best way to go now.
Thanks in advance,
John
I'm working on Vol2 Lab7 Task2.4. The task involves the following:
HQ phone 2 dials 914158884343.
Prefer to use TEHO to route the call out BR1. Local telco expects 7
digits. BR1 is an H323 gateway, so CUCM sends it 98884343. The
gateway strips the 9 before sending to telco.
Second choice
You could try the command I've been seeing floating around lately:
voice service voip
no supplementary-service h225-notify cid-update
I honestly haven't try this myself, but from what I've read in the previous
emails, this should accomplish what you are trying to do
-Original Message-
Voice service voip
No supplementary-service h225-notify CID-update
Matthew Berry
**Sent from my iPhone**
Skype/Twitter: ciscovoiceguru
Google Voice: +1 612 424 5044
On Jul 23, 2010, at 12:31, Brian Valentine bkvalent...@gmail.com wrote:
I'm working on Vol2 Lab7 Task2.4. The task involves
no supplementary-service h225-notify cid-update doesn't seem to help.
I had an epiphany and figured out a work around to accomplish the
task. What the PG suggests seems to work fine, but only on an MGCP
gateway. I had to build an additional dial-peer in my BR1 gw with
destination-pattern
It has not changed yet but it is slated to change. I left my notes at home
but Ben Ng. said @ the techtorial that its slated to happen in what I think
was about three months from now. So if you intend to take it before
September I would use the current written blue print.
Ì have written down on my notes from the VoDs I watched and from testing
done that H323 gateways and cosmetic effect in calling device display is
achieved by the following on calls that traverse H323 gateways:
Any digit manipulation performed in:
RP or RL or RG or Inbound dial-peer or Num-Exp will
Hello
Can someone confirm my understanding. The below question implies the use of
priority-queue out inteface command.
For adjusting how much bandwidth is given to the egress priority queue of a
3750/3560/2960 switch the interface command:
srr-queue bandwidth shape *means nothing*
The srr
Hi Daniel,
I had to review again my notes and the documentation to tell for sure (wish
I knew it out of my head as earlier I was studying a lot of the lan qos
theory).
You are correct, the srr-queue bandwidth shape means nothing when you
configure the priority queue out. As it says on the doc:
Thanks sir for your reply.
This is my understanding for quite a while and i hope i am not wrong for all
this time. So i'm happy that you agree. This goes inline to the document
3750 QoS configuration examples - The document does not state this
objectively and I'm finding weird the fact of seeing
Hello
On CUE if I have a GDM with one of its members br2ph2-3002, how do I get MWI
working to lamp the member's phone?
I have unsolicited notify configured as MWI method. Tried to enable
outcalling and do the trick with the num-exp but outcall is not supported on
cue with CCM mode.
Suggestions
Hello List
Apologies for my previous incomplete post.
This environment has the BR2 router in CME SRST mode. The CUE is licensed
for CCM integration.
While in CME SRST mode I'm trying to get the BR2-PH2 line 1 that is 3002 to
have its MWI to light when the GDM receives a message.
BR2PH2 is
16 matches
Mail list logo