Forgot to add that HQ and BR1 phones are sccp.
On Wed, Jun 15, 2011 at 4:21 PM, Adil Shaikh wrote:
> Hi all,
>
> I have configured MVA hairpin on BR1 router which is an MGCP gateway.
> If the call is made to MVA route-pattern number [1999] from BR1 phone then
> i hear "Welcome to Cisco Unfiied C
Hi all,
I have configured MVA hairpin on BR1 router which is an MGCP gateway.
If the call is made to MVA route-pattern number [1999] from BR1 phone then i
hear "Welcome to Cisco Unfiied Communications"
If i call to MVA route-pattern number [1999] from HQ phone or PSTN phone
then i do not hear "Wel
Hi,
I have CME 7 and this gateway work as H323, and I have configure CUE, CUE is
working fine, but I am not getting MWI on phone., please find my config
below, please help me , if I am missing something.
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
a
I bought the Multi-phone IPBlue which allows me to simulate almost any hard
phone with any MAC for UCM or UCME.
Otherwise, the 45s would work fine until you get to labs that require a lot of
line appearances (when you need to do multiple lines, BLFs, Single-button-login
for UCCX, etc)
Good luc
If BR1 works as teho GW for HQ calls the inbound voip dial-peer should select
g729.
For br1 phone local calls - g711
De: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] En nombre de Greg
Enviado el: miércoles, 15 de junio de 2011 1:15
Para: ccie_voice@onl
I've see some people configure voice class codec for the lab like below:
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g729r8
I was wondering that's the point of having such a class.
I meant, for the lab, it explictly requires either g711 or g729. So why do
we want to hav
I think if you set the bandwidth to greater than 768 you will not have this
applied to the interface for BR2
On Tue, Jun 14, 2011 at 5:17 PM, Roig Borrell, Francesc Xavier <
francesc.ro...@tecnocom.es> wrote:
> Hi all,
>
>
>
> If in the exam in Qos WAN exercise were asked to configure MLF or FR1
The 7945 are the same as the 7965 used in the lab, except for the 2 buttons
verse 6. You will have some issues with that in testing but other than that
you should be able to adapt to them verses buying 796x phones. You might
want to get on 7960 for your PSTN as that would work best but again you
Hi all,
If in the exam in Qos WAN exercise were asked to configure MLF or FR12 between
HQ and SB, supposing there is only one physical interface in HQ, the traffic
shaping applied will affect the BR2 subintertace appliying a default mincir
28000 which is a problem for more than one call
HQ#s
do you have your access list set on Presence or your digest credentials on
that particular user ?
2011/6/14 Randall Crumm
> Have you checked the owner of the phone?
> rc
>
> --
> *From:* Alan Gardner
> *To:* "ccie_voice@onlinestudylist.com"
> *Sent:* Tuesday, June 1
Hi,
I was wondering if one can use 7911/7945 or 7921's (have them readily
available) as remote phones for the LAB's, Instead of the 7961/2 (need to
purchase) ?
I am currently on LAB 2 and 3 and am using softphones.
Regards,
Radhesh
Have you checked the owner of the phone?rcFrom: Alan Gardner To: "ccie_voice@onlinestudylist.com" Sent: Tuesday, June 14, 2011 8:12 AMSubject: [OSL | CCIE_Voice] CUPS Presence only showing Devices from BR1 and not HQ / Disconnecting (pending retry) under Server health
Done the integration and if I
If you click on the services on the left side of your CUPC Health status it
will give additional information pertaining to that section, IE: Presence.
Have you checked your ACL on the CUPS? Maybe you forgot to add the allow
for the HQ subnet. I assume the BR1 users work fine, only issue is with
Done the integration and if I go to User management and end users all of my BR1
show devices, but all my HQ phone do not show devices.
I have checked my line to user association all good.
I have checked my End user in cucm- all good. I have compared all of them and
cannot figure out what could
Done the integration and if I go to User management and end users all of my BR1
show devices, but all my HQ phone do not show devices.
I have checked my line to user association all good.
I have checked my End user in cucm- all good. I have compared all of them and
cannot figure out what could
Hi Donny,
I think that you can have a tone per line.
If you have a phone with 2 lines, then you can have a 2 different tone. One
for each.
But I don't believe it is possible to do what you are looking for.
Tone is not an option when adding entries into your personnal directory...
Julien
2011/6/
16 matches
Mail list logo
