Zero and One are already pre-recorded (by default) in UCCX, so you can use
them.
On Sun, Feb 12, 2012 at 12:09 AM, Randall Crumm wrote:
> HI,
> I know the steps I need to do but I am unsure of the prompts I need to
> record.
>
> Please let know what I need to record.
>
> I believe I need to rec
Hello,
Do we need to set the NTP Server for UCCX Win Server? Or the NTP settings
during the Initial Setup is enough? Well, at least for the exam.
I cannot set the NTP Server for Win2003 (UCCX Server) - "net time"
command does not work, as it is looking for Win Server NTP, and is not
conencting
There is a step to generate a number... M not in front of UCCX right now so
can't tell you exact name of the step, but it is very easy to find it.
In this step you tell it what you want it to gemerate, in your case number, and
then provide it with the value, and then output prompt.
Sent from my
Thank you for your email. I will be out of the office until on Tuesday 14th
February, and I will respond when I get back in. If it is an urgent matter,
please call (55)55459105 or you can contact to Alejandro Juache. If you need
support please send a email to sopo...@censystems.com.mx
Regards
Prompt - > "Create Generated Prompt", where you have to point the
String which you want to play out (in your case it would be String with
value of "1" or "2" or anything you like to announce/play out.
You have to select the Constructor Type as well, as it rules how the Number
is played out grama
Hello,
Assume that we have G711 and G729 MTP's in first MRG, and then Xcoder in
the next MRG:
MRGL oder:
1) MRG_MTP
2) MRG_Xcoder
So as we know, CUCM can allocate the required MTP's based on codec - if
call is going to be g711 then the G711 MTP will be allocated, and if the
call is going to b
The initial setup is enough, datucha!
Enviado via iPad
Em 12/02/2012, às 09:51, datucha123 datucha123 escreveu:
> Hello,
>
> Do we need to set the NTP Server for UCCX Win Server? Or the NTP settings
> during the Initial Setup is enough? Well, at least for the exam.
>
> I cannot set the N
Hi all I have a weird problem. I can call from PSTN to RS2 phone rings I
pick up no audio..and I can reverse the call with no audio.
The PSTN router is a 3725 with AIM-VOICE-30 and RS2 is a 3825w/ PVDM2-32
both using VWIC2-1MFT-T1/E1
I have no errors seconds etc.. on either controller.
HI,
I recorded a closed prompt. I am able to find it and save it anywhere.
My issues is in my script I have a play prompt step and when I use reactive
debug it the prompt is not playing. I getting the error "I'm sorry we
are experiencing system issues..."
My question is does it matter where I s
Hello Experts,
I recently followed few steps to use UCCX on a VMWare environment but I am
dealing with a few issues. I will explain first how I did it, and then I
will tell you what the problem is.
I installed on a MCS7835 the 2003.1.4 OS for HP Servers. The MCS we have is
HP, so... Everything we
Try to delete and add again your application, i ve came through this issue and
that was my workaround
Thanks
Typed using my thumbs iPhone
On 2012-02-12, at 11:32 AM, "Randall Crumm"
mailto:rrcr...@yahoo.com>> wrote:
HI,
I recorded a closed prompt. I am able to find it and save it anywhere
Hi,
How can I open a script when I am not logged into on of the PL pods?
Cheers,
Randall
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
ww
I installed a win2003 server on ESXi Applied the reg hacks so the CCX
install cd would recognize it as an MCS server then installed CCX ... Works
like a charm
Of course this is for lab purposes only...
KP
Sent from my iPhone and I have big thumbs ... So please excuse the typos.
On F
KP, would you mind sharing the Registry Hacks?
*Emanuel Damasceno*
CCNP Voice
On Sun, Feb 12, 2012 at 6:54 PM, CCIEVoiceKP wrote:
> I installed a win2003 server on ESXi Applied the reg hacks so the CCX
> install cd would recognize it as an MCS server then installed CCX ... Works
> like
Other than ICMP, can you access the IOS device and App servers ?
-Chase
--
If winners never quit and quitters never win, then who coined the phrase, "Quit
while you’re still ahead."?
Date:
Hi chase,
No, i can't
Regards,
On Sun, Feb 12, 2012 at 6:36 PM, chase mergenthal wrote:
> Other than ICMP, can you access the IOS device and App servers ?
>
> -Chase
>
>
> --
> If winners ne
Hi chase,
This is a ping from HQ-Router to my laptop
--
HQ-RTR#ping 192.168.10.15 repeat 50
Type escape sequence
Can to telnet to the loopback of HQ-RTR; from you laptop?
Also, What configs did you load?
-Chase
--
If winners never quit and quitters never win, then who coined the phrase, "Quit
while you’re
Try removing the ip mtu 1300 statement
Randall
Sent from my iPhone
On Feb 12, 2012, at 2:03 PM, Juan Carlos Anzola
wrote:
> Hi Folks,
>
> I am new to proctorlabs, today scheduled my first session, configured my
> 2811 Home Router and started with the basic connectivity configurations.
I removed the "ip mtu 1300" from fa0/0
same issue. pings for every two packets sent, one is lost.
Regards,
On Sun, Feb 12, 2012 at 7:00 PM, Rrcrumm wrote:
> Try removing the ip mtu 1300 statement
>
> Randall
>
> Sent from my iPhone
>
> On Feb 12, 2012, at 2:03 PM, Juan Carlos Anzola <
> ju
Hi Chase,
i loaded the configs for ISR. attached to the first mail is my config.
Regards.
On Sun, Feb 12, 2012 at 6:59 PM, chase mergenthal wrote:
> Can to telnet to the loopback of HQ-RTR; from you laptop?
>
> Also, What configs did you load?
>
>
> -Chase
>
>
> --
Sorry, I should be more clear.
When you log into the web interface, you will see "Lab configs".
So, which lab configs did you load?
After you get the configs loaded, you should be able to enter the MAC of your
PSTN phone, and at a minimum, get that registered.
-Chase
--
Hi chase,
I loaded LAB-1A. i didn't try with the PSTN Phone beacause it was LAB1
Regards,
On Sun, Feb 12, 2012 at 7:13 PM, chase mergenthal wrote:
> Sorry, I should be more clear.
> When you log into the web interface, you will see "Lab configs".
> So, which lab configs did you load?
> A
Hi Emanuel,
If you have windows 2003 standard edition you can boot from that cd and
repair your converted virtual machine. In that process you ll be providing
a different serial key at the repair face. So it will take that as the
active key. Hope this helps
On Mon, Feb 13, 2012 at 12:55 AM, Eman
Give it a shot...
if that fails, try using the software VPN solution, with a soft phone and see
what your results are...
Also, what IOS are you running?
-Chase
--
If winners never quit and quit
Thanks for the hint Ravindra.
I already deleted everything :(
I will try with a plain windows server 2003, if it is too stressful I will
reinstall on MCS and convert again. I will use your advice :)
Thank you very much
*Emanuel Damasceno*
CCNP Voice
On Sun, Feb 12, 2012 at 9:53 PM, Ravindra
Here's what I used:
For lab testing only install normal 2003 Server, the run regedit;
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Cisco Systems, Inc.\Systems Info\OS Image]
"Version"="2003.1.1"
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTW
Dont go through the painful procedure of installing and converting your
Cisco windows appliance version. straightaway install it on the ESXi or
Workstation. Create a vm with 2 GB memory and 160 GB hard drive. Install
from the Cisco OS cd. before installing UCCX repair your installation with
the win
28 matches
Mail list logo
