Rrcrumm,
apply this acl on the inbound interface when you do this step, then there
is no need adding additonal acl statements mentioned by Dan... remember you
applied it on the outside interface which doesn't have any control in
regulating the remote host with exception adding the Dan acl
Not a bug - different commands. srst ephone description just sets what shows in
the running config as the description tag on ephones that are learned. System
message is always what shows on the phone just above the soft keys.
DQ
d...@cisco.commailto:d...@cisco.com
Sent from my iPhone
On Jul
If question ask to use Unity Connection , then use UC Media Master.
From candidate PC open UC media master save your recording.
Now from Candidate PC , open UCCX GUI upload your recorded prompts.
For all other tasks of UCCX , open UCCX GUI from UCCX server ( first RDP to
UCCX server ) -- for
This seems like a dumb question...
If the hq rtr has a subinterface with native in it don't we have to have to
have a native statement on the switch port with the trunk to hq?
for example..
hq
interface fa 0/0.101
encapsulation dot1q 101 native
ip address 10.10.100.1 255.255.255.0
and the
Well, yes, it look like is working but in the background for HQ router
native vlan is 101 so, untagged traffic is send over vlan 101, on the far
switch the untagged traffic is been put on the native vlan (untagged) of
the local switch, in this case 1. That is why everything can work even with
this
Hello,
I have noticed some different behaviors and was wondering what you recommend
If the question asks for plan unknown and type unknown
should you set to
1. plan unknown and type unknown or
2. plan isdn type unknown or
3. plan call manager type call manager
For me I have tried the above
if it is h323 gateway, i will create a translation rule and apply at the
dial-peer... if it is mgcp gateway do it on the call manager route list detail
level...
thank you
krishna.
From: Randall Crumm rrcr...@yahoo.com
To: Online Study
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com http://www.platinumplacement.com/
-- next part --
An HTML attachment was scrubbed...
URL:
/archives/ccie_voice/attachments/20120730/4cce5389/attachment-0001.html
Hi
It is with MGCP gw
Sent from my iPhone
On Jul 30, 2012, at 9:55 AM, Krishna vinayak_...@yahoo.com wrote:
if it is h323 gateway, i will create a translation rule and apply at the
dial-peer... if it is mgcp gateway do it on the call manager route list
detail level...
thank you
www.PlatinumPlacement.com http://www.platinumplacement.com/
-- next part --
An HTML attachment was scrubbed...
URL: /archives/ccie_voice/attachments/20120730/4cce5389/attachment-0001.html
://www.platinumplacement.com/
-- next part --
An HTML attachment was scrubbed...
URL: /archives/ccie_voice/attachments/20120730/4cce5389/attachment-0001.html
--
___
CCIE_Voice mailing list
CCIE_Voice
If you don't use a switch module , a Router doesn't understand vlans.
When you configure encapsulation dot1q 101 under Router sub-interface , it
just add a vlan tag (101) before sending packets out of this interface
incoming packets with same vlan tag is matched for this sub-interface (for
layer
was scrubbed...
URL: /archives/ccie_voice/attachments/20120730/d05c6c96/attachment-0001.html
--
Message: 2
Date: Mon, 30 Jul 2012 12:00:40 -0700
From: Rrcrumm rrcr...@yahoo.com
To: Mann Chaddha mann.chad...@gmail.com
Cc: ccie_voice@onlinestudylist.com ccie_voice
industry leading CCIE Lab training,
please visit www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
-- next part --
An HTML attachment was scrubbed...
URL: /archives/ccie_voice/attachments/20120730/d05c6c96/attachment
I wanted to query the group to find out if there is a preferred method for
handling high availability with H.323 gateways. Specifically, call failover
when the PRI on the H.323 gateway is down (or simulated down, as the case may
be).
In the solution guides for the ipExpert labs I see that they
15 matches
Mail list logo
