Hi All
I had this working previously ,but for some reason I just can`t get the phones
to push their config to the gw when in srst mode ,only one phone registers
without dn and other phone does not even register.
Below is my config :
telephony-service
srst mode auto-provision all
srst dn template
That's a known defect.
The workaround is the following:
1) Register the phones to CUCM
2) Save the configuration write memory
3) Reload the voice gateway
4) Test SRST again
That should fix the problem, however, it might come back.
There is something wrong with the Simple Subnetwork Auto
It is ios 15.1 ?
Sent from my iPhone
On 27 Sep 2012, at 2:37 PM, Pablo Meneses
pmenese...@gmail.commailto:pmenese...@gmail.com wrote:
That's a known defect.
The workaround is the following:
1) Register the phones to CUCM
2) Save the configuration write memory
3) Reload the voice gateway
4)
Hi
It might be too late :(
Chek the following post. It contains all the answers and explanations for
this question
http://dreamforccie.wordpress.com/2010/08/07/understanding-mgcp-packets-a-brief-overview-and-example-with-debugs/
BR
Amaia
___
For more
Amaia,
follow the blog.ipexpert.com for right information on mgcp debug events... This
blog is incorrect in showing the right output for pstn phone is ringing..
thank you
krishna.
From: Amaia Lesta amaia.le...@gmail.com
To: ccie_voice@onlinestudylist.com
Congrats!
--
DQ
Dan Quinlan - CCIE #36129
412.237.6268
Video: sip:daqui...@cisco.com
From: Juan Carlos Anzola
juancarlosanz...@gmail.commailto:juancarlosanz...@gmail.com
Date: Thursday, September 27, 2012 6:01 AM
To: ccie_voice@onlinestudylist.commailto:ccie_voice@onlinestudylist.com
That's is not the version used on the lab.
Check the following link for a full list of equipment and versions:
https://learningnetwork.cisco.com/docs/DOC-5292
-Pablo Meneses.
On Thu, Sep 27, 2012 at 8:36 AM, Rynard Coetzee
rynard.coet...@bytes.co.zawrote:
It is ios 15.1 ?
Sent from my
Here is a good one too
http://blog.ipexpert.com/2012/09/06/mgcp-tshoot-call-setup-and-teardown/
On Thu, Sep 27, 2012 at 11:28 AM, Amaia Lesta amaia.le...@gmail.com wrote:
Hi
It might be too late :(
Chek the following post. It contains all the answers and explanations for
this question
Oh I see, I didn't know that.
But did you have a chance to try the steps I mentioned?
-Pablo Meneses.
On Thu, Sep 27, 2012 at 10:52 AM, Rynard Coetzee rynard.coet...@bytes.co.za
wrote:
Hi Pablo
I know what equipment is in the lab ,I have gone for 2 lab attempts. My
problem is that I
Hi
Yes I did try those steps ,problem still remains. But I have managed to stumble
upon the issue ,I just don`t know how to fix it yet. It seems that the phones
are unable to load their cnf.xml files from CUCM when they register so they
boot up with default .xml file ,which does not have the
Hi,
Thanks to everyone for writing back to me.
I did get few good strategies.
I am going tomorrow.
Just hope for me that if i fail.. I fail with good marks ;).
Trying to release the stress.
Guys do pray for me. i am little stress and nervous now.
Rgds
Enderson
Would you mind showing me the configuration file?
-Pablo Meneses.
On Thu, Sep 27, 2012 at 12:20 PM, Bill Lake whl...@gmail.com wrote:
Agree,
That's a known defect.
The workaround is the following:
1) Register the phones to CUCM
2) Save the configuration write memory
3) Reload the
A few random ideas...
Are you using sub or pub as tftp server? If sub maybe you have a
replication issue.
Can you download the SEP.cnf.xml from the TFTP server manually
(from windows command line tftp)?
If not try restarting tftp server on CUCMs, see if this causes it to
recreate
Raynard,
http://www.cisco.com/en/US/docs/voice_ip_comm/cusrst/feature/guide/srst8_1.html
I recently had a client that upgraded all their routers to 3900's Series
routers and along with that of course 15.x code. SRST in original
configuration stopped working with the 15.x code.
We were seeing
14 matches
Mail list logo