Hi Experts,
I am trying to configure PSTN gatekeeper to test Gatekeeper VIA routing, so I
decided to start with a simple scenario where no VIA zone is introduced, but I
am not able to get it working, the dialed string 011916745738932 arrives to
PSTN gatekeeper but with no hope to match,
-boun...@onlinestudylist.com] On Behalf Of Mouhammad Nasser
Sent: Wednesday, July 07, 2010 11:09 AM
To: ipexpert
Subject: [OSL | CCIE_Voice] PSTN Gatekeeper
Hi Experts,
I am trying to configure PSTN gatekeeper to test Gatekeeper VIA routing, so I
decided to start with a simple scenario where
From: Mouhammad Nasser [mailto:engnasse...@hotmail.com]
Sent: Wednesday, July 07, 2010 11:36 AM
To: Jeff Price (jeffpric)
Cc: ipexpert
Subject: RE: [OSL | CCIE_Voice] PSTN Gatekeeper
Hi Jeff,
Thank you for your reply
In order to make things simplist, I altered the extension number
connectivity between GK1 and GK2, but not between originating GW and GK2.
regards
kobel
2010/7/7 Mouhammad Nasser engnasse...@hotmail.com
Hi Jeff,
Stripping the technology prefix will be required if it is initially attached to
the string, but it is not. the string arrives as 01191
Hi Graham,
I have a question here about the different folder values, is there a reference
that contain all values for different models, can we access such a reference in
the exam, or we have to memorize values of the 7965 series?
Best regards,
Hi Erwan,
Threshold values are introduced to support weighted Tail Drop, please refer to
QoS SRND for that
I shall suggest another document here: Catalayst 3750 QoS configuration
examples
HTH
Hello everyone,
I am working on Lab 8 to make calls between CUCM and CME through CUBE; anyway:
I am using SCCP phones in CME instead of SIP.
Now, I can call from HQ to CME, but calls from CME to HQ fails with error code
38, and error message on phone is Unknown number, although calls
set correctly, look at what happens to the call
setup after it leaves CUBE
Graham
On 27 Jun 2010, at 09:54, Mouhammad Nasser engnasse...@hotmail.com wrote:
Hello everyone,
I am working on Lab 8 to make calls between CUCM and CME through CUBE; anyway:
I am using SCCP phones in CME instead
Hi Kobel,
The worst case takes a place upon the initialization of each RSVP call
calculation, CUCM 7.0 LLD refers that amond N calls, it is recommended to
calculate call number N as worst case, so it always succeeds (written in P.3-64
Configuration Recommendation)
Regarding the
Hi Daniel,
I have to admit that I think I was wrong, but I am not %100 sure also, it is
about how to interpret the document, in P. 3-58 section: RSVP Design Best
Practice it is mentioned in the second bullet that:
If all the PQ traffic is RSVP-enabled, the value specified in the ip rsvp
Hi Phill,
I may suggest the a reason might be the dialplan-pattern configured under
telephony-service
For example: if you dial-plan pattern is 032143... , and you configure
voice-mail to be 3500, then 032143500 will be dialed instead of 3500, then you
need to do:
- make your
Hi Kobel,
Is there any document for how to configure the CUP Publish trunk method?
I could understand from the posts that we still need to create a SIP trunk,
configure it in the CUP Publish service parameter field, and assign each user
to a line appearence
Anyway, if the CUCM
Hi CCIE Voice (hopefully, I wish you to start using ur number soon ;-) ),
Well, I may suggest something different, I have two suggestions:
1st, assign an ip address for your gatekeeper in first zone local command
2nd, use different interface for your VIA zone and your gatekeeper
Hello everyone,
I have questions about QoS in Ver.2 LAB 3
1st- In the 3750 part, the following command is used:
sw3750(config)#mls qos srr-queue output cos-map queue 1 threshold 3 5
my quesiton is: why do we need to use the threshold part of the command, as if
there is no
Hello Everyone,
I am trying to implement Ver.2 Lab 3 Messaging Part, In Auto Attendant part, I
configured the standard greeting in the created call handler approperiatly
(having Allow Transfers to Numbers Not Associated with Users or Call Handlers
checked), but I am still unable to dial
Hi Kau,
I suggest you use your cor lists names int and loca instead of using the
cor list members Allow and Block, because till now: there are no cor lists
allows niether incoming nor outgoing
Anyway, I recommend you to use more informative names for cor lists and their
members, this
Hi Jammer,
As per my understanding for this, yes Q1 will become a priority queue after we
issue command priority-queue out
Anyway, it is shaped to %20 so it will not starve other traffic. i.e. as long
as its traffic are within the boundaries of %20, it will be served before
anything
Hi Jammer,
If it is CME in SRST mode this can be done through defining ephone-template
like below:
ephone-template 5
fastdial 1 1101 name Front Register
fastdial 2 918005550111 Headquarters
softkeys idle Newcall Cfwdall Pickup
softkeys seized Endcall Cfwdall Pickup
softkeys
Hi Kobel,
In the Get Reporting Statistic step, one can retrieve the number of total
contacs in queue, which is defined as:
Number of total contacts since the statistics were last reset for this CSQ
But I didn't try it before, so I am not sure if one can choose which CSQ to
this?
2010/6/11 Mouhammad Nasser engnasse...@hotmail.com
Hi Kobel,
In the Get Reporting Statistic step, one can retrieve the number of total
contacs in queue, which is defined as:
Number of total contacts since the statistics were last reset for this CSQ
But I didn't try it before, so
the time zone benefits as well as the late start.
RTP
supposedly starts first thing in the morning bright and early.
2010/6/9 Mouhammad Nasser engnasse...@hotmail.com
Hi,
I think it is better to take one that is closest to one's timezone! this
will eliminate the factor of travel
Hi,
I think it is better to take one that is closest to one's timezone! this will
eliminate the factor of travel sickness, and one may go to exam awake enough!
Regards,
_
Hi everyone,
I am having a problem while trying to configure the gatekeeper part of Vol2
part1. although the transcoder is registered to CUBE, the call is still unable
to hit the transcoder, and it fails
Can anyone advise?
Best regards,
Mohammad
23 matches
Mail list logo