If the Voice service Voip commands are all configured...A restart has always
helped me ...
From: Boris
To: Steven
Cc: "ccie_voice@onlinestudylist.com"
Sent: Wednesday, January 18, 2012 10:19 AM
Subject: Re: [OSL | CCIE_Voice] Gatekeeper VIAZONE - Could no
Hello Guys
I have never any document related to this so seeking help from anyone
who can guide me on this ..Whether if its even possible or not..
I have Branch 2 site phones registered with CUCM.. The Unity express module
with Jtapi integration . I have configured voice view and it wor
Hello Guys
I have tried to soo many times but it has never worked perfectly
for me .. Could anyone please help me with this ..
here is my config...My cue is working fine.. I call press the message button
and listen to messages .. Voice view is giving me grief.. can anyone please
Hello Guys
I am working on this lab and for some reason its not working as
expected ...
The expected behavior is
5 Maximum calls to Number 3004.
Phone 1 should be able to Handle 3 incoming calls .. 4th call should ring on
Phone 2..
Phone 2 should be able to handle max 2 calls..
From: amit batra
To: ccie voice
Sent: Monday, September 12, 2011 12:21 PM
Subject: [OSL | CCIE_Voice] BACD Drop Through MoH issue
Hello Guys
I dont know if this issue is related to my previous sent email or
different..Anyways ... The question in the lab says
Hello Guys
I dont know if this issue is related to my previous sent email or
different..Anyways ... The question in the lab says Configure BR2 so that when
dial 032143000 it should ring 3001 and 3002 . If both users are busy queue the
call and MoH should be played...I configure BaCD drop
Hello Guys
I am stuck with this strange thing and for some reason cant get Moh
working on my CME BR2 router..It has always worked in the past Multicast and
Unicast..
In this particular question, there are no Multicast requirement so i just
configure moh music-on-hold.au command. Whe
Hello guys
recentlly i have heard some thing about TAPS.. Well i myslef have never
worked with TAPS so got scared a little bit . On Cisco website i was looking
for documentation but couldnt find a step by step guide ..I have found this
document which i kinda what i was looking. So thought o
Hello Everyone
I have configured VPIM as mentioned in the lab and using
the same steps mentioned in the video by Vik..But i am unable to send
message from any of the locations.
When i try to send message from the phone, i get the confirmation that "message
sent" but no MWI no message
try this
http://ccieash.wordpress.com/2010/06/25/h323-call-preservation/
might help you...
--- On Wed, 6/1/11, CCIE Voice wrote:
From: CCIE Voice
Subject: Re: [OSL | CCIE_Voice] Call Preservation Issue
To: "amit batra"
Cc: ccie_voice@onlinestudylist.com
Date: Wednesday, June 1,
Hello Everyone.
I have finished IPexperts Volume 2 lab 2 .. I managed to finish
everything apart from VPIM and Supplementary services ...VPIM is a license
issue so not worried ..
I have configured a GK trunk between CUCM and HQ router (Gatekeeper) and BR2
router.
all endpoints are regi
Hello Everyone
i know a lot of people study for CCIE Voice using their own hardware ( I am
doing the same).
I was just wondering that how people practice VPIM ? I use same version of CUCM
and unity as shown in Vik's video's..
When ever i try to configure VPIM i get license violation error
server
ip http path flash: (or /gui - path where u have the cme files)
ip http auth local
HTH
Prashant
On Mon, Mar 21, 2011 at 7:19 AM, amit batra wrote:
Hello Everyone ..
I have searched everywhere and tried all commands but this thing isnt
working..CUE is integrated with CME (BR2). everything
Hello Everyone ..
I have searched everywhere and tried all commands but this thing isnt
working..CUE is integrated with CME (BR2). everything is working as expected..
I have configured Voiceview .
When i press the services button. I can login. i can see messages in the inbox.
but when i pre
Watch Vik Malhi's video .. He has explaines this very well..
Answer to your question is in his video..
--- On Fri, 3/4/11, Ccie Voice wrote:
From: Ccie Voice
Subject: Re: [OSL | CCIE_Voice] Calling and Called Party Number Type
To: "Matthew Berry" , ccie_voice@onlinestudylist.com
Date: Fri
Hello guys.
could you please do everyone a favour of sending unicast reply. Instead of
sending a broadcast reply all.
Thanks.
Regards
Amit
Sent from my iPhone
On 25/02/2011, at 9:55 PM, Mohamed Gazzaz wrote:
Yes
Date: Thu, 24 Feb 2011 23:52:32 -0600
From: danie...@gmail.com
To: ccie_v
Hello guys
May be I am wrong. But I kind of remember this issue. People talked a lot
about it. And is a known bug. If this is the same issue which we are talking
about . I guess restarting the router was the fix.
Regards
Amit
Sent from my iPhone
On 19/01/2011, at 4:50, Vik Malhi
hello guys
correct me if i am wrong .. under the t1 controller pri-group command with
service mgcp prefix is missing
apart from that .. Have you enabled MGCP on the router ?
--- On Fri, 1/7/11, givemeccievoice2...@gmail.com
wrote:
From: givemeccievoice2...@gmail.com
Subject: Re:
HI
After i make one call .. The phone freezes... then i have to kill application
from Task manager ...This happens everytime..
CIPC works fine..
--- On Sat, 1/1/11, Rrcrumm wrote:
From: Rrcrumm
Subject: Re: [OSL | CCIE_Voice] IP Blue Phone with Windows 7
To: "amit batra
: [OSL | CCIE_Voice] IP Blue Phone with Windows 7
To: "'amit batra'" , ccie_voice@onlinestudylist.com,
"Shrini"
Date: Tuesday, December 28, 2010, 7:29 PM
By default TFTP Client ports are disabled in Win-7.
I faced the same problem @ CIPC, check windows feat
Hello Everyone..
I just wanna check one with with people in this forum..Does IP Blue soft
phone works fine wwith Windows 7 operating system or its just me having
troubles.. I have tried installing uninstalling and everything..
It doesnt work some time and the error i get is " Set the pr
/10, Goran Selthofer wrote:
From: Goran Selthofer
Subject: Re: [OSL | CCIE_Voice] UCCX 7.0(1) Error - Cannot connect to the
IPPhone Agent service
To: "amit batra"
Cc: "Tam Nhu" , "osl osl"
Date: Wednesday, September 22, 2010, 2:51 PM
Amit,
logically, if CA
ards
Amit
--- On Tue, 9/21/10, Tam Nhu wrote:
From: Tam Nhu
Subject: Re: [OSL | CCIE_Voice] UCCX 7.0(1) Error - Cannot connect to the
IPPhone Agent service
To: "Amit Batra"
Cc: "osl osl"
Date: Tuesday, September 21, 2010, 8:31 PM
I finally resolved the issue with VMw
45:40,733 WARN IPPA3008 IP phone address <10.10.200.2>: IPPA
client encountered an error <56:Invalid agent password specified.> while making
call to BIPPA service.
Regards
Amit
--- On Mon, 9/13/10, Tam Nhu wrote:
From: Tam Nhu
Subject: Re: [OSL | CCIE_Voice] UCCX 7.0(1) Error -
Hi GUys,
I am trying to setup remote monitoring script. i am using the default
RMON script in the application >> application management. . The directory
number i have setup for this is
2123945400
When i dial this number from PSTN phone its says "" Welcome to remote
monitoring.. Plea
Hi
Buddy ,, could you please share what helped you to fixed the issue???
Regards
Amit
Sent from my iPhone
On 19/09/2010, at 7:41 PM, vcciev wrote:
OK, resolved
___
For more information regarding industry leading CCIE Lab training, please visit
Hi Narayan
I think you are missing translation profile to add 9 infront of the ANI
coming from pstn...
The profile can be attached to either voice port or dial-peer used for incoming
calls in the incoming direction..with In translation profile calling number...
Prefix 9 for subscrber cal
Hi Tam
I got the original Uccx installation media from my work. I converted into
iso and uploaded on my vmware..
I didn't download it from anywhere..
Regards
Amit
Sent from my iPhone
On 14/09/2010, at 2:58 AM, Tam Nhu wrote:
Hi Amit,
It's great to hear that you have a uccx vmware ru
Hi Tam
I have Uccx running on vmware.. Please let me know if you need any
information..
Regards
Amit
Sent from my iPhone
On 14/09/2010, at 12:43 AM, Tam Nhu wrote:
One more thing, though, before I spend hell out of my time to troubleshoot
this. If anyone has your own UCCX server, cou
Hi
I am not an unity express expert. But I think this is after message action
thing.. Should be set to hang up...
In Unity connetion it's possible. I don't know how to do this in express.. I
hope this helps
Regards
Amit
Sent from my iPhone
On 13/09/2010, at 6:57 PM, Pithog Oil wrote
Hi Guys,
I am testing hunt group configuration on CME.. Following is my
routers config..
ephone-hunt 1 sequential
pilot 3100
list 3002
ephone-hunt 2 sequential
pilot 3200
list 3001
This configuration works fine... Now what i wanna do is that ... If call comes
for 321431
Hi Guys,
Thanks for your reply...Yes it all worked well in the end
Thanks to all of you
regards
Amit
--- On Sun, 9/12/10, Miron Kobelski wrote:
From: Miron Kobelski
Subject: Re: [OSL | CCIE_Voice] Unity Connection Phone view
To: "Tam Nhu"
Cc: ccie_voice@onlinestudyli
Hi Guys,
I have CUCM 7.0.1 and Unity connection 7.0.1..I am trying to setup phone
view feature of Unity connection..Following the document i have done all the
steps.. I couldnt find any supporting document and wanna know on how to use
this feature...I wanna see this working on my phones..
Hi Tariq
You will need Dte-Dce cables. We usually call them back to back cables.
They come in different lengths.. 1 feet 3 feet 6 feet or even longer. Buy
whatever suits ur need..
I hope this helps
Regards
Amit
Sent from my iPhone
On 1/08/2010, at 12:59 AM, Tariq Khan wrote:
Dear al
34 matches
Mail list logo
