Is this for a CCIE Lab or production environment?
On Thu, Jun 27, 2013 at 7:57 AM, Dharambir kumar varma <
dharambi...@gmail.com> wrote:
> Hi All,
> We have same extension range of 65XX both in Location A as well as in
> Location B. For dialing Location B extension we use prefix 81 .
> For diall
You can create another partition and assigned the extensions accordingly in
Unity Connection, don't forget to assign them to CSS.
On Thu, Jun 27, 2013 at 10:38 AM, ccieid1ot wrote:
> Is this for a CCIE Lab or production environment?
>
>
> On Thu, Jun 27, 2013 at 7:57 AM, Dhar
Check the codecs, transcoders, MRG, MRGL, etc
On Wed, Mar 20, 2013 at 11:16 AM, Vikky Kumar wrote:
> Hi Experts,
>
> I configured branch 2 CME/CUE working normal for Voice mails.
>
> CUE is registered with CUCM but I call not call CUE(6220) from HQ and
> Branch1 but branch2 phones 4001 and 4002
Try modifying your config to this:
class-map match-any signal
match ip dscp cs3
match protocol sip
match protocol h323
match protocol mgcp
match protocol skinny
class-map match-any voice
match ip dscp ef
match protocol rtp
match protocol rtcp
On Sun, Mar 3, 2013 at 7:29 PM, Jason Lee w
You will find your answers here.
http://www.voiceie.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=8;t=001456
On Fri, Mar 1, 2013 at 12:10 PM, Steve Keller wrote:
> Can anyone see a scenario where you would need to call into BACD at site C
> (CME) from Site B or Site A? The reason I ask is becuas
Ahh, I got lab 8.
It ask how to open a garage door with my toothpick. HELP PLEASE
AHHH
BTW, to the original poster:
http://www.fairfaxunderground.com/forum/file.php?2,file=50550,filename=363-bruce-willis-cool-story-bro-image.png
On Wed, Apr 25, 2012 at 7:25 AM, Abel ... wrote:
Check codec, transcoders config and dial-peer that's coming in from PH-A.
On Sun, Apr 22, 2012 at 9:13 PM, Chris wrote:
> Hi All,
> I am missing a fundamental concept. Following is my scenario.
>
> *PH-A*--sccp--*UCM**GK+CUBE *h323--*CME*
> (with
> xcoder and lo
of cube>"
>
> Dial-peer voice 1 voip
> description "to sip provider"
> voice-class sip profiles 100
>
> Hope this helps,
>
> Joel P
>
> On Tue, Jan 10, 2012 at 11:26 AM, ccieid1ot wrote:
>
>> Hi guys,
>>
>> We have an
Hi guys,
We have an issue of SNR not able to complete the calls to remote
destination since the SIP Provider is authenticating on DIDs. The
customer's CUCM is connected to our CUBE SP (ASR 1000) and we're connected
to our SIP Provider. Example: I call into the phone 4242862304, it has
SNR to 1
No.
On Nov 9, 2011 7:50 AM, "Voiper" wrote:
> Hi Labbers:
>
> I have a question about NTP. If I am using hq-rtr as the ntp master and
> configured CUCM ntp setting with hq-rtr loopback, would I still need to be
> able to ping 10.10.100.2 (pstn) from the pub or sub?
>
> My pstn router uses its dhc
Vmware snapshots will store your previous work.
On Oct 21, 2011 11:08 AM, "Mike" wrote:
> Hi all,
>
> ** **
>
> I have my own lab with 2811’s, HWIC4s, 7961 phones and VMWARE for all UC
> servers. In my R&S days I had my own gear and could load up labs with no
> issues.
>
> ** **
>
> My qu
If you have windows 7 pro and up, search for xpm. It's a virtual windows
xp desktop provided by Bill Gates. ;)
On Aug 2, 2011 7:31 PM, wrote:
> THANKS EVERYONE FOR YOUR ASSISTANCE. I USED DYNAMIC DNS JUST LIKE EVERYONE
SUGGESTED AND I OWE A SPECIAL THANKS TO ABEL WHO LOGGED IN AND SHOWED ME HOW
Agree with Bryan. Use dynamic dns for lab access.
On Aug 2, 2011 10:15 AM, "Bryan Byrne" wrote:
> You can get around the need for a static IP address with a dynamic DNS
server. I've used www.dyndns.com in the past. It used to be free, not sure
if it still is.
>
> -Bryan
>
> On Aug 2, 2011, at 10:
Congrats!!
On Jul 22, 2011 1:03 PM, "Cristobal Priego"
wrote:
> congratulations man !!
>
> 2011/7/22 Hough, Earl
>
>> Congratulations, and enjoy a well-deserved break!
>>
>> ** **
>>
>> Earl Hough
>>
>> CCIE #16508 (R&S/Security/Voice)
>>
>> ** **
>>
>> *From:* ccie_voice-boun...@
Congrats111
On Jul 19, 2011 2:23 PM, "adam compton" wrote:
> Good Job Cris!! you've helped me out with a few questions on the board
> before, and knew you would get it eventually. Hopefully i can add one more
> to the board Thursday!
>
> Adam Compton
>
> On Tue, Jul 19, 2011 at 11:49 AM, Cristobal
Yes it can. Use the same mwi-ports. Just different vm ports.
On Jul 18, 2011 5:58 PM, "Santiago Figueroa" wrote:
> Hello experts
>
>
>
> Anyone can tell me if the CUCM can to work with several Unity Connection,
Unity Enterprise, CUE at same time?Is necessary to active anything to
support more Vo
Look at the intel i7 cpu processors. They run native quads with hyperthread
and is enhanced for virtualization. I bought a dell 435mt for $550 after
cash back and coupons from the dell outlet store.
Specs:
Intel i7 cpu @2.67
9GB ram ddr3
1.5TB
Running ESXi 4.0
I bought this 2 years ago so price
Try binding your cme to your vlan31. Also, try add a hunt-group. Just
taking a stab in the dark.
On Jul 10, 2011 2:43 AM, "Sanoj Thomas" wrote:
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are y
Was the cards bought on ebay? Could be fake.
On Jul 6, 2011 3:32 PM, "Hough, Earl" wrote:
> That's where I would place my money - bad port, if you're able to use the
other 3 ports no problem. I'd still compare the outputs of show diag with a
router that has a fully functional module, just to make
Congrats!
On Wed, Jun 29, 2011 at 9:44 AM, George Goglidze wrote:
> Hi all,
>
> As the subject suggests, it's official, I'm dual CCIE #19926 R&S and Voice
> starting yesterday.
>
> Finally, it's a relief, no more studying late, spending weekends on a
> computer, making calls, my neighbours t
Yes, or another cucm server with a vwic on hq router. Pstn/wan could be
anything since its not tested.
duy
ccie #27737 voice
tmobile g2
On Jun 27, 2011 2:08 PM, "Bill Lake" wrote:
> Could you use a 3725 for your PSTN?
>
> On Mon, Jun 27, 2011 at 12:03 PM, ccieid1ot wrote:
If not 2811 then at least a 2801 should suffice. The 3725 won't support
'cme 7.0'
duy
ccie #27737 voice
tmobile g2
On Jun 27, 2011 10:27 AM, "Scott Jones" wrote:
> Hi everyone-I've got a question regarding lab equipment for my home
lab...I know on the test it uses 2811s, but it's hard to drop t
Alex, definitely needed. Test it out by enabling it on HQ router than don't
enable on BR2 router. Now open up the cue gui and see if it operated
correctly.
duy
ccie #27737 voice
tmobile g2
On Jun 27, 2011 6:17 AM, "Alex Goh" wrote:
> Hi Shrini,
>
> I guess what cristobal trying to mean is when
Based on my experiences, take your time to jot down ip addresses, vlans,
protocols to configure on each devices. Get your base/infrastructure setup,
then work on features/requirements in cli. Once those are all completed,
work on the GUI. Do enough where you have at least 1.5 to 2 hrs to
verify/
duy
ccie #27737 voice
tmobile g2
On Jun 25, 2011 12:35 PM, "Bill Lake" wrote:
> When we were at the OWLE Vik gave some very sound advice, don't get
> stuck, fix it or create a work around as fast as possible. If you get
> stuck, it not only hurts you for that one item but kills your time to
> fix
I didn't know that they had coffee?
duy
ccie #27737 voice
tmobile g2
On Jun 23, 2011 3:41 PM, "George Goglidze" wrote:
> would I be breaking NDA if I said they had horrible coffee in the lab? :-)
>
> On Thu, Jun 23, 2011 at 7:32 PM, ccieid1ot wrote:
>
>&g
I can't even spell NDA without shriveling.
On Thu, Jun 23, 2011 at 1:28 PM, Bill Lake wrote:
> Yes it is but I am not breaking NDA or even thinking about it : )
>
> On Thu, Jun 23, 2011 at 1:23 PM, ccieid1ot wrote:
>
>> That would be the answer in another universe
That would be the answer in another universe. So it's all relative.
duy
ccie #27737 voice
tmobile g2
On Jun 23, 2011 1:19 PM, "Bill Lake" wrote:
> I thought the answer was
> [image: $ f(x) = \sin x - \sqrt{ 3 } \cos x $]
>
> On Thu, Jun 23, 2011 at 11:38 AM, ccieid1o
Answer is 'C'
duy
ccie #27737 voice
tmobile g2
On Jun 22, 2011 7:26 PM, "Randall Saborio" wrote:
> Do you know what the NDA is about? (not that I want you to answer me. if
you
> don't know, please find out)
>
> Even so, you have the question, why can't you figure it out on a practice
> lab on yo
If it's pulling an IP than it probably is. Or it could have been an old one
that hasn't been released.
On Thu, Jun 16, 2011 at 11:06 AM, wrote:
> Is the vlan up...is cdp turned on
> -Original Message-
> From: Vinay Kumar6
> Sender: ccie_voice-boun...@onlinestudylist.com
> Date: Thu, 16
Roig hit the spot.
On Wed, Jun 15, 2011 at 4:00 AM, Roig Borrell, Francesc Xavier <
francesc.ro...@tecnocom.es> wrote:
> In the dial peer 15 add
>
> Incoming called-number 700[12]….
>
> So the cue call does not match the default dial-peer
>
>
>
> If you do debug voice dialpeer
>
>
Were they setup in the same location? How was the agent setup? One button
login or the norm? Rethink the steps that was done and try to remember
every detail of the question. Something minute can caused of lost points.
On Wed, Jun 8, 2011 at 8:09 AM, Michael Luo wrote:
> The one I got actual
If it was that easy then no need for experts.
On Tue, Jun 7, 2011 at 9:50 AM, adam compton wrote:
>
> Just failed the LAB 5 everybody has been talking about. I felt very
> prepared, but not for that test. Alot of things that IPExpert has never
> touched. That sucks cuz I was trying to use the
Use the auto configured threshold is fine and modify the cos of the
particular q. What you are looking at is the dscp-map to q.
duy
ccie #27737 voice
tmobile g2
On May 31, 2011 9:21 PM, "Cristobal Priego"
wrote:
> hello all,
>
> I have a question for you guys
>
> hopefully you can help me under
The mem is your ram, CF is your hd. Try the sandisk CF, I'm sure cisco
just oem it from either sandisk or another manufacturer.
duy
ccie #27737 voice
tmobile g2
On May 31, 2011 1:22 PM, "Alex Goh" wrote:
> Hi Guys,
>
> Hope I can seek a little help here, my AIM-CUE 1GB CF card failed on me
jus
Answer your 1st question, its 1/10th.
2nd question is correct.
duy
ccie #27737 voice
tmobile g2
On May 31, 2011 4:19 PM, "Cristobal Priego"
wrote:
> guys i have a question for your
>
> my questions is in regards to the shared bandwidth i know it's measured as
a
> weight and whenever you have sh
Congrats. Now to smoke some peyote. :)
duy
ccie #27737 voice
tmobile g2
On May 27, 2011 4:09 PM, "Adam Thompson" wrote:
> Congratulations!!! Sit back, relax, you have earned it.
>
> -Adam
> CCIE #28928
>
> On Fri, May 27, 2011 at 3:57 PM, Fatai Adekunle wrote:
>
>> Hot and fresh. I passed my l
The last time I saw this issue it was related to the dsp seizing and never
got released. So had to reboot it.
duy
ccie #27737 voice
tmobile g2
On May 25, 2011 11:17 PM, "Bill Lake" wrote:
> Thanks, the config had been running for several years with the 10 b
channels
> with no issues that we are
Congrats. Just 4 months and there's already 200 plus ccie certified. I
need to starting owning a starbucks. :P
duy
ccie #27737 voice
tmobile g2
On May 17, 2011 12:52 PM, "Moataz Mamdouh" wrote:
> Good Job
>
>
> Best Regards ,
>
> Moataz Mamdouh Tolba
> CCIE # 26129 (Voice)
>
> -Original M
What Earl said. Btw, I have one for sale. Send me an email offline.
duy
ccie #27737 voice
tmobile g2
On May 16, 2011 11:39 AM, "Hough, Earl"
wrote:
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Did you take it offline then 'restore factory default'?
duy
ccie #27737 voice
tmobile g2
On May 13, 2011 4:52 PM, "Brian Rudy" wrote:
> Hello Experts - I have a Aim-CUE module in my home lab running version
> 7.03. When I do a 'restore factory default' and reload the cue module, I
> never get pr
gt;
>
>
>
>
> From: ccie_voice-boun...@onlinestudylist.com
> [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of ccieid1ot
> Sent: 13 May 2011 15:37
> To: cisco-v...@puck.nether.net; ccie_voice@onlinestudylist.com
> Subject: [OSL | CCIE_Voice] CUCM 7.1.5.1-12 restore via DRS
>
From: ccie_voice-boun...@onlinestudylist.com
> [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of ccieid1ot
> Sent: 13 May 2011 15:37
> To: cisco-v...@puck.nether.net; ccie_voice@onlinestudylist.com
> Subject: [OSL | CCIE_Voice] CUCM 7.1.5.1-12 restore via DRS
>
>
>
active/platform/log/dbl.bin': Read-only file system
> /bin/chmod: changing permissions of
`/var/log/active/platform/log/dbl.bin': Read-only file system
>
> We were getting an error logging into the CLI as well, but I don't have it
recorded.
>
> HTH,
> Jason
>
> On
Disregard it. It's working now. Sheeesh
On Fri, May 13, 2011 at 9:36 AM, ccieid1ot wrote:
> Guys,
>
> Could somebody give me a sanity check? I can add the SFTP server but it
> doesn't see any tar files. I have tried using './' and '/' for the f
Guys,
Could somebody give me a sanity check? I can add the SFTP server but it
doesn't see any tar files. I have tried using './' and '/' for the file
path. If I use a client to login, I see all the tar files just CUCM does
not.
--
duy
CCIE #27737 Voice
0 if
no phone type specified.
>
> Sent from my iPad
>
> On 10 May 2011, at 06:00, ccieid1ot wrote:
>
>> Did you put a 'type 7965' under ephone?
>>
>> duy
>> ccie #27737 voice
>>
>> tmobile g2
>>
>> On May 9, 2011 11:00 P
Did you put a 'type 7965' under ephone?
duy
ccie #27737 voice
tmobile g2
On May 9, 2011 11:00 PM, "Abel ..." wrote:
> It look like the CME is not creating the cnf files for 7965
>
> CUCME#sh telephony-service tftp-bindings
> tftp-server system:/its/united_states/7960-tones.xml alias
> United_Sta
Yes
On Fri, Apr 29, 2011 at 4:35 AM, Pithog Oil wrote:
> Hi Experts,
>
> i am purchasing 4 phones to be used for IP expert Hardware VPN , i will
> like to know if i can use 3 additional softphones so as to have 7 phones in
> all so that i can practice all configurations.
>
> Thanks for your prom
Congrats!
On Wed, May 4, 2011 at 3:02 AM, Shrini wrote:
> Hi Experts,
>
> Today I am officially announced as Voice CCIE.
>
> Thanks to one and all for your valuable suggestions and help throughout
> this journey.
>
> Special thanks to Vik and IP Expert team for hosting this excellent mailer
Where's your transfer-pattern and call-forward pattern under
telephony-system?
On Tue, Apr 19, 2011 at 1:27 PM, Stephen Manuel wrote:
> Ladies and Gentlemen,
>
>
>
> I have the following setup in my home lab.
>
>
>
> 1760 Router operating as BR1
>
> 2811 Router operating as HQ w/CUE running CME 7
Call-forward no answer or busy set?
On Mon, Apr 11, 2011 at 12:33 AM, Randall Crumm <
randall.cr...@flextronics.com> wrote:
> Hi,
>
> I was working on a lab today and trying to get CUE to work. The problem I
> had was the call was never directed to the CUE for VM. It rang and after
> ~21-23 secon
Yes
duy
ccie #27737 voice
tmobile g2
On Apr 7, 2011 9:45 AM, "Julien Krieger" wrote:
> Hi guys,
>
> I am running a few tests to clear thing up on SRST with HSRP.
>
> I have 1 remote site with 2 local gateways. Theses gateways must act as
SRST
> should my wan goes down.
> I would usually create 2
Can CUCM ping the loopback IP?
On Tue, Mar 29, 2011 at 3:54 PM, Randall Crumm <
randall.cr...@flextronics.com> wrote:
> Thanks Earl,
>
> I’ll use this if I need to for future labs
>
>
>
> Randall
>
>
>
>
>
> *From:* Hough, Earl [mailto:earl.ho...@pcmallservices.com]
> *Sent:* Sunday, March 27, 20
No need for serial. Ethernet is fine. Pvmd2-16 should be enough.
duy
ccie #27737 voice
tmobile g2
On Mar 26, 2011 6:07 PM, "Shaun P" wrote:
> Hi Voicers:
>
> I have a home lab with 2811 as PSTN router and a 2522 as frame relay
router.
> Do I need to add a serial interface to my PSTN router and
Dial peers
On Thu, Mar 24, 2011 at 10:03 AM, wrote:
> Hi everyone,
>
> I would like to get your input about the subject above.
>
> Actually I have a Softswitch and one Proxy... I would like to know which
> parameters I have to configured to get the link up and making calls going
> thru between t
duy
ccie #27737 voice
tmobile g2
On Mar 20, 2011 1:09 PM, "mihal caro" wrote:
> Hi Mark
>
> I see CCIE as an achievement and not making lot of money. CCIE gives you
> lots of skills that you can use in the organisations. Of course you need
the
> experience to work in big organisations and big net
Cisco.com
duy
ccie #27737 voice
tmobile g2
On Mar 16, 2011 1:13 AM, "Ajay Singh" wrote:
> HI sir
>
>
> I need ccie voice more information...
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
What's under "voice service voip"?
duy
ccie #27737 voice
tmobile g2
On Mar 15, 2011 11:59 PM, "Erwan Erwan" wrote:
> hi all,
>
> I am practicing WB lab 6 , that use Gatekeeper for call from HQ (UCM) to
BR-2 (CME)
>
> - call from HQ-- 5001 to 3001 -- Br-2 and vice versa (thru Gatekeeper) ,
4
Do the written.
duy
ccie #27737 voice
tmobile g2
On Mar 15, 2011 10:12 AM, "Mohamed Adel" wrote:
>
> Dear Sir
> i want to be CCIE Voice
> so i know that i must get the Written and then the lab Exam
> already i am 3 years experience in network CISCO
> in routing , switching , security , wireless
We're talking about transfer patterns, not dialing correct?
On Mon, Mar 14, 2011 at 3:46 PM, Josh Kittle wrote:
> My apologies if this double-posts. I think my phone tried to send it from
> the wrong account.
>
> I'm playing around with transfer patterns and associated restrictions in
> CME (try
Set the bandwidth on the pvc before applying auto qos.
duy
ccie #27737 voice
tmobile g2
On Mar 8, 2011 4:13 PM, "Ccie Voice" wrote:
> Hi all,
>
> could you please tell me what is the most important things that I should
adjust
> if I need to use Auto QoS for MLP.
>
> i know it depends on the requ
e.
>
> Can you try in your lab and let me know about the result ?
>
> thx,
> Rahul
>
>
> On Mon, Mar 7, 2011 at 10:46 AM, ccieid1ot wrote:
>
>> Thanks Roger! Hopefully Rahul agrees as well. :P
>>
>> duy
>> ccie #27737 voice
>>
>>
ip and port as would have been streamed from the CUCM MOH
> server.
>
> On 3 March 2011 22:31, ccieid1ot wrote:
>
>> Rahul,
>>
>> Where would the voice class be applied to MOH? Dial-peers has no
relevance
>> to MOH.
>>
>>
>> On Wed, Mar 2, 2011 a
Configs? Make sure under multicast route has the loopback and voice vlan
int.
duy
ccie #27737 voice
tmobile g2
On Mar 4, 2011 3:14 PM, "Ccie Voice" wrote:
> Hi All,
>
> I did the following scenario:
>
> HQ and BR1
> I enabled MoH g711ual Multi-cast and I configured multicast under SRST
> config
It will be noted in the lab book. Take a deep breath. You can breathe
now. :)
On Thu, Mar 3, 2011 at 12:52 PM, Ccie Voice wrote:
> Thank you all for your reply,
>
> I just need to know if the PSTN router in the LAB will accept the call or
> no if it is not set to the proper value.
>
> If the
Rahul,
Where would the voice class be applied to MOH? Dial-peers has no relevance
to MOH.
On Wed, Mar 2, 2011 at 1:22 PM, Rahul Kapor wrote:
> Hi Roger ,
>
>
>
> If Voice class is not configured then MOH will negotiate codec g729 and
> then it that case port should be incremented by 4 . in th
Congrats!!
duy
ccie #27737 voice
tmobile g2
On Mar 2, 2011 9:32 AM, "Stutz, Bernhard" wrote:
> Hi,
>
>
>
> Finally my Journey to become CCIE Voice has ended. Let's start the next
> journey... (don't know what will be the next but I wouldn't do another
> CCIE so far ;-)
>
> I would like to th
George, if there isn't a redistribute static command, then you won't lose
all sites.
duy
ccie #27737 voice
tmobile g2
On Feb 26, 2011 5:29 AM, "George Goglidze" wrote:
> shutting down WAN does not help on proctorlabs, as you are supposed to
have
> a few Soft Phones connected from your PC.
> I pu
Ip route ccm ip to null interface.
duy
ccie #27737 voice
tmobile g2
On Feb 26, 2011 1:30 AM, "Ilya Rubinchik"
wrote:
> Just shutdown frame-relay subinterface on hq or branch router.
>
>
> --
> Best regards,
> Ilya Rubinchik
> Chief UC Engineer
> Mars Solutions Ltd.
>
> Skype: im_citius
> Mob: +9
You would get a "Pass" score. If you get % score you didn't pass. :P
On Fri, Feb 25, 2011 at 10:45 AM, mihal caro wrote:
> Hi all
>
>
> What is the minimum score that is required to pass CCIE VOICE LAB?
>
>
> regards
>
>
> ___
> For more information
Let's see the configs. It could be your cable.
On Thu, Feb 24, 2011 at 10:34 AM, Vinay Kumar6 wrote:
> Hi,
>
> I have connected two routers Back-to-Back using the E1 Cross over cable,
> but I am unable to get the *Multiple_Frame_Established.*
>
> I see on one of the side as slips are increasing,
What version of cme?
duy
ccie #27737 voice
tmobile g2
On Feb 23, 2011 11:34 AM, "Ki Wi" wrote:
> It's my first time trying out. However one of my phones works and the
other
> one refuse to. The non-working phone, when i press the line button, it
will
> make "new call" automatically, seems to me
Can you post your configs after reboot?
duy
ccie #27737 voice
tmobile g2
On Feb 21, 2011 10:24 AM, "Friderich Claude" wrote:
> Hello Guys,
>
> Does anybody already encountered the problem with Virtual access ??
>
> Let me explain .
>
> As I configure qos with MLP LFI between hq and br2 every
Yes, make sure RP is using it.
duy
ccie #27737 voice
tmobile g2
On Feb 20, 2011 6:03 PM, "Jay Woods" wrote:
>
> Does anyone know if I should be able to add an H.225 Gatekeeper controlled
trunk to a Route Group? It's not showing up in my RG list in CUCM.
>
>
>
>
__
Windows firewall on UCCX server?
duy
ccie #27737 voice
tmobile g2
On Feb 18, 2011 5:26 PM, "Steve Denney (stdenney)"
wrote:
> Sanity check...I was doing Vol2 Lab3 yesterday, and hitting an issue
> with not being able to FTP the CUE CCM license file over from the UCCX
> server.
>
> I had the CUE
Yes.
duy
ccie #27737 voice
tmobile g2
On Feb 18, 2011 5:28 PM, "Mohamed Gazzaz" wrote:
>
> Hello,
>
>
> Can We use 7970s instead of 7965,2,1 to prepare for the lab ? I have some
at work.
>
>
> Regards,
> Mohamed Gazzaz
>
___
For more information regard
Any reason you're setting your pri-group with 1-3,23-24? Try it with just
1-3
duy
ccie #27737 voice
tmobile g2
On Feb 18, 2011 5:29 PM, "Mark Reed" wrote:
> Some additional information as I'm finding new things as I dig deeper.
>
> FYI, PSTN is a 3725 with two NM-HDVs running Cisco IOS Softwar
Mihal, meant to say: dial-peer voice 3001 VOIP
;)
On Tue, Feb 15, 2011 at 2:34 AM, Ravindra Lakpriya wrote:
> Thanks Mihal,
>
> This must be the reason why internal one is failing with out waiting
> like the POTS phone. i will try this 2night and update you guys.
>
> Many thanks
>
> On Tue, Feb
Sorry saw ur no shut. Did u apply ip address in local zone and is the int
un shut?
duy
ccie #27737 voice
tmobile g2
On Feb 13, 2011 6:19 PM, "Zafar Shakeel" wrote:
> Hey Guys.
>
> Would appreciate if someone can give me a pointer about why a gatekeeper
would
> remain in shutdown state.
>
>
> Tr
Under gk mode, no shut
duy
ccie #27737 voice
tmobile g2
On Feb 13, 2011 6:19 PM, "Zafar Shakeel" wrote:
> Hey Guys.
>
> Would appreciate if someone can give me a pointer about why a gatekeeper
would
> remain in shutdown state.
>
>
> Trying to configure the gatekeeper on my PSTN router which is a
2651xm can be used for 2 sites but u would definitely need 2800 for the
latest version of cme. Buy nm-hd-2ve as they are cheaper and configured the
same as pvdm2. Ping me offline if you wanna buy some of my remaining
stuff. Use ip blue or vm with ip communicator if u have a beefy server.
Lots of
If its a bug with no work around, don't put too much emphasis on it. Just
recognize that it is and explain to the proctor. All of the lab scenarios
are given POC before putting into the actual labs. Some may have been
slipped and they'll remove it or update their labs. This is basing on a
milli
Congrats!
duy
ccie #27737 voice
tmobile g2
On Feb 12, 2011 1:14 PM, "CCIE" wrote:
> Congrats!!
>
> On Feb 12, 2011, at 9:15 AM, Bill Lake wrote:
>
>> Congratulations
>>
>> On Sat, Feb 12, 2011 at 9:37 AM, Kaif Shaikh
wrote:
>> Hi Guys,
>>
>> I am really thankful i passed my lab yestarday..
>>
Correct. If it's not installed figure another way or think what also
provides tftp. ;)
2011/2/11 Roger Källberg
> You should not count on that it will be installed on your desktop.
>
> *Roger Källberg*
> CCIE #26199 (Voice)
> Consultant
> Cygate AB
> Eric Perssons väg 21, SE-217 62 MALMÖ
>
>
M, Ashwani Ranpise wrote:
>>
>> ccied1ot,
>>
>> How much do you want for 2811 with AIM-CUE and NM-HD2ve ? I am in North
>> Carolina.
>>
>> Thanks,
>>
>> Ashwani
>> --
>> *From:*
>> ccie_voice-boun...@onlinestudylist.com
>>
In your cucm, did you set a srst reference or used the default gateway? SIP
phones needs the references.
duy
ccie #27737 voice
tmobile g2
On Feb 8, 2011 8:42 PM, "Roger Carpio" wrote:
> telephony-service instead and call-manager-fallback are not used for SIP
> SRST.
>
> I would try removing the
need to get users logged in if we chose device members?
>
> I thought it was only required when we choose "user member".
>
> see
> http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_1_2/ccmfeat/fsccmac.html#wp1225737
>
> Maybe I misunderstood it?
>
> Thank
If you hear busy then none of the users are logged in to ac.
duy
ccie #27737 voice
tmobile g2
On Feb 8, 2011 10:00 AM, "Michael Luo" wrote:
> I'm using the native Attendant Console on CUCM 7.1.2. Information as
below:
>
> Hunt Pilot: 5500
>
> Member: 5001, 1001
>
> Calling party: 5002
>
> Time:
Never heard that.
duy
ccie #27737 voice
tmobile g2
On Feb 7, 2011 4:28 AM, "anupam TYAGI" wrote:
> Hi ,
>
> Is there a mandatory requirement of having dsp on router for moh on srst
> Router .( moh should play from router flash )
>
> Thanks
___
For more
t;
> Thanks,
> Ashwani
>
>
> From: ccie_voice-boun...@onlinestudylist.com on behalf of ccieid1ot
> Sent: Fri 2/4/2011 3:54 PM
> To: khaled Saholy
> Cc: ccie_voice@onlinestudylist.com
> Subject: Re: [OSL | CCIE_Voice] Need assistance in set
I still have some pieces left. I'm willing to let it go for cheap. Let me
know. Oh and thanks. Was a long journey and I probably wouldn't have done
it again.
duy
ccie #27737 voice
tmobile g2
On Feb 4, 2011 1:48 PM, "khaled Saholy" wrote:
>
>
> Thanks cciedot for the information and congratul
The nm-hd-2ve has 30 channels onboard so no pvdm2 is needed. I used the
2811 because it supports cme 7.x. that is needed as the other routers
doesn't support it.
duy
ccie #27737 voice
tmobile g2
On Feb 4, 2011 1:07 PM, "khaled Saholy" wrote:
>
>
> It seems both modules are the same but NM-HD-2
So does the NM-HD-2VE. It supports the new way of configuring transcoders
and conf-b.
Here was my setup.
HQ
2610XM
NM-HDV-24
VWic-1MFT-T1
WIC-1T
SB
1760
PVDM-4
VWIC-1MFT-T1
WIC-1T
SC
2811
AIM-CUE
VWIC-1MFT-E1
WIC-1T
NM-HD-2VE
PSTN/WAN
3640
NM-HD-2VE
VWIC-2MFT-T1
VWIC-1MFT-T1
NM-4T
2011/2/
I have some vwics wic-1t aim-cue and 3550 switch, also a nm-hd-2ve. does the
same as nm-hdv2. But has 2 slots.
duy
ccie #27737 voice
tmobile g2
On Feb 4, 2011 8:54 AM, "khaled Saholy" wrote:
>
>
> Hi friends,
>
> I'm planning to buy home lab for CCIE Voice and I spent some days in
searching for
Practice on speed. Cli, gui, then test + ts.
duy
ccie #27737 voice
tmobile g2
On Jan 31, 2011 5:49 PM, "Cristobal Priego"
wrote:
> Hello all,
>
> I am ready to start with the workbook 2 and getting ready to take the test
> i was wondering if you could recommend a strategy that i should follow
>
Cor and corlist.
duy
ccie #27737 voice
tmobile g2
On Jan 30, 2011 3:38 PM, "Cisco Voip" wrote:
> Hi all.
>
> In my office, i have 10 executives, whom we want only selected group of
people
> to call. By default, anyone can call them right ? In cucm we are able to
do this
> via CSS. How can we ach
On your other question, the qos srnd is placed on the desktop.
duy
ccie #27737 voice
tmobile g2
On Jan 26, 2011 1:32 PM, "ccieid1ot" wrote:
> Correct me if I'm wrong, isn't trusting the ports setting the ingress and
> service policy is setting on egress?
>
> duy
Set it as .255 since it won't hurt.
duy
ccie #27737 voice
tmobile g2
On Jan 26, 2011 1:21 PM, "Shrini" wrote:
> Greetings:
>
> If I need phones to be assigned only specific range of IPs , say from
> 10.10.202.100 to 10.10.202.150 in a /24 network
>
> ip dhcp excluded-address 10.21.20.1 10.21.20.
Correct me if I'm wrong, isn't trusting the ports setting the ingress and
service policy is setting on egress?
duy
ccie #27737 voice
tmobile g2
On Jan 26, 2011 1:21 PM, "Miron Kobelski" wrote:
> Hello,
>
> I'm working on Vol2 Lab8 QoS section. Task 5.2 requires to conditionally
> trust DSCP mark
1 - 100 of 240 matches
Mail list logo
