Hello Guys,
Still waiting any update on this ?
On Mon, Sep 9, 2013 at 4:22 PM, sanity insanity
networksanitytoinsan...@gmail.com wrote:
hi Guys,
In the normal mode when wan is up I can call into the cue ( on site c )
through jtapi . However
when the wan link breaks and the when my
Hi,
*I'm sorry*, *we* are currently experiencing system problems and are *unable
to process your call *
Is usually played by UCCX I have never heard it from CUE. Try factory reset
on CUE just to make sure there is nothing wrong with it.
On Tue, Sep 10, 2013 at 7:54 AM, sanity insanity
Hello,
You can get that message if the SIP trigger is enabled for SRST but for
some reason the voicemail application isn't. Login to the CUE via CLI and
check that your SIP trigger is pointing to the voicemail application and
also do a 'show ccn application' to check the status of the voicemail
First of all,
How is your SiteC Router CUE? Is it originally MGCP Gateway integrated with
CUCM and the CUE is integrated with CUCM or CME?
If that happens , The only way I could think of that your CTI Route Point
85224044220 has mistakenly configured with Call Forward Unregister to the
UCCX Pilot
FWIW - I know I'm also used to getting that message from UCCX but you will
get it from CUE as well for reasons like the one I mentioned above. I
tested this in my lab to confirm and if you'd like to try, just disable the
voicemail application in CUE while using the SIP trigger that points to it.
hi Guys,
In the normal mode when wan is up I can call into the cue ( on site c )
through jtapi . However
when the wan link breaks and the when my site c router and phones fall
into srst and then try placing calls to the cue using sip dial peer I
hear the following prompt - *I'm sorry*,
all,
when i press VM button in SC phone, it ask for pin. And i press 12345 .
this work fine in normal mode (CUE register to UCM)
but if i switch to SRST mode, it also prompt for pin, just when i press 12345,
they never detected it.
any config i missed in CUE ?
May be you missed
dtmf-realy sip-notify
Under the dial-peer to CUE
And hence DTMF is not sent to CUE and you are not authenticated
Hope That helps
Thanks
___
For more information regarding industry leading CCIE Lab training, please visit
Hi Ivan,
Check your CUCM configs in the CUE web admin page. Go to 'Configure-Call
Manager' and make sure you have all of the required information populated.
The CUE setup wizard will let you walk through without specifying a JTAPI
user/pass but if you look into the menu I mentioned, it's listed
...@onlinestudylist.com] On Behalf Of Martin Sloan
Sent: Friday, June 07, 2013 9:31 PM
To: Ivan Darío Sánchez Calderón
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] CUE AFTER SRST
Hi Ivan,
Check your CUCM configs in the CUE web admin page. Go to 'Configure-Call
Manager' and make sure you
...@onlinestudylist.com] On Behalf Of Martin Sloan
Sent: Friday, June 07, 2013 9:31 PM
To: Ivan Darío Sánchez Calderón
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] CUE AFTER SRST
Hi Ivan,
Check your CUCM configs in the CUE web admin page. Go to 'Configure-Call
Manager' and make sure
Hi everyone,
When I have cue integrated with CUCM and I make some voicemail test when
the gateway is in srst everything works fine, but when I come back from
srst the CTI RP and the CTI Ports don't register. I restart the cue, the
CTI service on CUCM but still shows unregistered, someone knows
Hi Guys
We have cue registered with cucm
if the GW become in srst mode then the below commands will take care about
voicemail?
ccn subsystem sip
gateway address 192.168.3.254
!
ccn trigger sip phonenumber
application voicemail
enabled
maxsessions 6
end trigger
and also a sip dial peer
I would always put mwi sip unsolicited under the sip subsystem as well.
Depends how you intend on setting up your MWI though, outcalling vs
unsolicited sip notifications.
Derek
On Mon, Jan 14, 2013 at 6:52 AM, Chrysostomos Christofi
ch.christ...@logicom.net wrote:
Hi Guys
** **
We
, 14 Ιανουαρίου 2013 3:56 μμ
To: Chrysostomos Christofi
Cc: Online Study (ccie_voice@onlinestudylist.com)
Subject: Re: [OSL | CCIE_Voice] CUE in SRST
I would always put mwi sip unsolicited under the sip subsystem as well.
Depends how you intend on setting up your MWI though, outcalling vs
:56 μμ
To: Chrysostomos Christofi
Cc: Online Study (ccie_voice@onlinestudylist.com)
Subject: Re: [OSL | CCIE_Voice] CUE in SRST
I would always put mwi sip unsolicited under the sip subsystem as well.
Depends how you intend on setting up your MWI though, outcalling vs
unsolicited sip
thank you all
From: Ahmad Taamneh [mailto:ahmad_tam...@hotmail.com]
Sent: Δευτέρα, 14 Ιανουαρίου 2013 4:24 μμ
To: Chrysostomos Christofi
Cc: Derek Wyss; Online Study (ccie_voice@onlinestudylist.com)
Subject: Re: [OSL | CCIE_Voice] CUE in SRST
Yes, the ccn subsystem sip it's ccn trigger
If you test failover by stopping the ccm service, it is expected
If you shut down the wan ports the ports should register back
Enviado desde mi iPhone
El Jun 29, 2011, a las 21:06, sandeep.ra...@wipro.com escribió:
Hi All,
I have CUE in SRST mode and it works fine, but when i bring back
Hi All,
I have CUE in SRST mode and it works fine, but when i bring back CUCM i dont
see the CTI Route point and CTI ports getting registered at all unless i reboot
the CUE module.
Is this the way it normally behaves or am i unaware of some configuration to
fix this behaviour.
Also can you
Message-
From: Jonathan Charles [mailto:jonv...@gmail.com]
Sent: Wednesday, 12 August 2009 11:30 AM
To: Aamir Panjwani
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] CUE in SRST...
That is not SRST config
That is CCME config.
Jonathan
On Tue, Aug 11
...@gmail.com]
Sent: Tuesday, 11 August 2009 9:41 AM
To: Aamir Panjwani
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] CUE in SRST...
Nope.
On Mon, Aug 10, 2009 at 8:12 AM, Aamir
Panjwaniaamir.panjw...@ivision.com.au wrote:
Jonathan, did you manage to figure this out
weird
and unexpected behavior
Thanks
-Original Message-
From: Jonathan Charles [mailto:jonv...@gmail.com]
Sent: Tuesday, 11 August 2009 9:41 AM
To: Aamir Panjwani
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] CUE in SRST...
Nope.
On Mon, Aug 10, 2009 at 8:12 AM
: Tuesday, 11 August 2009 9:41 AM
To: Aamir Panjwani
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] CUE in SRST...
Nope.
On Mon, Aug 10, 2009 at 8:12 AM, Aamir
Panjwaniaamir.panjw...@ivision.com.au wrote:
Jonathan, did you manage to figure this out?
-Original
...@gmail.com]
Sent: Wednesday, 12 August 2009 11:30 AM
To: Aamir Panjwani
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] CUE in SRST...
That is not SRST config
That is CCME config.
Jonathan
On Tue, Aug 11, 2009 at 6:38 PM, Aamir
Panjwaniaamir.panjw...@ivision.com.au wrote
Thanks
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Aamir Panjwani
Sent: Wednesday, 12 August 2009 11:39 AM
To: Jonathan Charles
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] CUE in SRST
Jonathan, did you manage to figure this out?
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Jonathan
Charles
Sent: Sunday, 9 August 2009 8:00 AM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice
Sent: Sunday, 9 August 2009 8:00 AM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] CUE in SRST...
I posted this to other groups without adequate response...
So, I have a customer who wants to put in a CUE at every remote site
for VM, but use CUCM for call processing (so the CUE
I posted this to other groups without adequate response...
So, I have a customer who wants to put in a CUE at every remote site
for VM, but use CUCM for call processing (so the CUE would work in
SRST, but be connected to CUCM via JTAPI).
We have demo gear from Cisco and we have the CUE7 working
28 matches
Mail list logo