alledOctet3=0xA1
> GwOutpulsedCalledNumber=3001
> GwOutpulsedCalledOctet3=0xA1
> MediaInactiveDetected=no
> MediaInactiveTimestamp=
> MediaControlReceived=
> LongDurationCallDetected=no
> LongDurCallTimestamp=
> LongDurcallDuration=
> Username=
>
> Telephony call-legs: 1
> SIP call-legs: 0
> H323 call-
ctet3=0xA1
>GwOutpulsedCalledNumber=3001
>GwOutpulsedCalledOctet3=0xA1
>MediaInactiveDetected=no
>MediaInactiveTimestamp=
>MediaControlReceived=
>LongDurationCallDetected=no
>LongDurCallTimestamp=
>LongDurcallDuration=
>Username=
>
>
>Telephony call-legs: 1
>SIP call
iaInactiveTimestamp=
> MediaControlReceived=
> LongDurationCallDetected=no
> LongDurCallTimestamp=
> LongDurcallDuration=
> Username=
>
> Telephony call-legs: 1
> SIP call-legs: 0
> H323 call-legs: 1
> Call agent controlled call-legs: 0
> SCCP call-legs: 0
> Multicas
cked "Inbound Fast start " and "Outbound Fast Start"
>
>when i call from SB phone to 911 and vice versa. I did not see Fast Start.
>
>- Can you write correct detailed steps here?
>
>tks
>
>
>
>
>
>
>
> From: E
> ------
> *From:* Edgar Feliz
> *To:* Karen Johnson
> *Cc:* "ccie_voice@onlinestudylist.com"
> *Sent:* Wednesday, July 3, 2013 6:20:55 PM
> *Subject:* Re: [OSL | CCIE_Voice] fast start H323
>
> Karen See below for
e to 911 and vice versa. I did not see Fast Start.
- Can you write correct detailed steps here?
tks
From: Edgar Feliz
To: Karen Johnson
Cc: "ccie_voice@onlinestudylist.com"
Sent: Wednesday, July 3, 2013 6:20:55 PM
Subject: Re: [OSL | CCIE_Voice]
Thanks Edgar.
I try again now, still not show
From: Edgar Feliz
To: Karen Johnson
Cc: "ccie_voice@onlinestudylist.com"
Sent: Wednesday, July 3, 2013 6:20:55 PM
Subject: Re: [OSL | CCIE_Voice] fast start H323
Karen See below for fast conne
Hi Edgar,
that is not the "h323 message", in the question, saying " h323 message only".
-ikizoo
Date: Wed, 3 Jul 2013 20:29:02 -0400
From: ejzi...@gmail.com
To: karen.johnson...@yahoo.ca
CC: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] fast start H323
Also
Karen See below for fast connect... Make sure you are looking at the
section that has the RemoteIPAddress with the IP address of the CM. Also
did you enable F/S on the CM?
VOIP:
ConnectionId[0x43E821AF 0xB06B11E2 0x80020025 0x45D31A08]
IncomingConnectionId[0x43E821AF 0xB06B11E2 0x80020025 0x45D31A
Also on CM side with h245/h225 trace on this is the out F/S
05/21/2013 19:10:04.653 CCM|H225Cdpc::null0_CcSetupReq(3, 39229128):
FastStartInfo: Outbound FastStart Triggered - PreAllocating
MTP|
There is a similar message for inbound.
Edgar
On Wed, Jul 3, 2013 at 8:20 PM, Edgar Feliz wrote:
experts,
i have configure H323 GW to be "Fast start" by using Transcoder and enable
"fast start" under service voip in IOS GW.
however when i make call and verified using " sh call acti voice" and looking
at "Fast Connect"= False.
- is there any thing else needed to make this work ?
- what i
11 matches
Mail list logo