> Got it, thx.
>
> So this means the use of an "argument amplifier" or a "discussion wood"...
> (translated from german)
Yes :-)
Another common term is 'cluestick'. It's a type of LART (Luser Attitude
Readjustment Tool).
When HP released the LogicDart, I jokingly suggested it should be a
'De
Mouse wrote:
> >> [...] a dose of the clue-by-four!
> > Häh? What's that "clue-by-four!" ? :-)
>
> The :-) makes it look as though you actually know what it is, but your
> asking for native-anglophone help makes me think perhaps not. So I'm
> going to treat this as the request for idiom explanat
On 9/14/2015 1:10 PM, Holm Tiffe wrote:
> Holm Tiffe wrote:
>
>
> Ok, the test is running fine now ..
> I had to enable BEVENT with Switch 1 on the BA23 front panel (was disabled)
> but still the same error. Next I removed W9 from the M8192 Module and it
> works now. :-|
>
> Please, can someone
>> [...] a dose of the clue-by-four!
> Häh? What's that "clue-by-four!" ? :-)
The :-) makes it look as though you actually know what it is, but your
asking for native-anglophone help makes me think perhaps not. So I'm
going to treat this as the request for idiom explanation it looks like
on the s
tony duell wrote:
>
> > That would be my first interpretation too: that it is a directive
> > addressed to someone putatively running the test. It _might_ mean that
> > the test also tests to ensure that the jumper is installed.
>
> There is another interpretation that I have just realised. If
Mouse wrote:
> > Please, can someone from the natural english speakers here explain
> > how this sentence is meant:
>
> > "ZKDJB2 [...]. Ensure that halt trap option is disabled (jumper W9
> > installed)."
>
> > For me (as a german) that means that the jumper W9 has to be
> > installed to run
> That would be my first interpretation too: that it is a directive
> addressed to someone putatively running the test. It _might_ mean that
> the test also tests to ensure that the jumper is installed.
There is another interpretation that I have just realised. If this is the right
one
then who
> From: Holm Tiffe
> "Ensure that halt trap option is disabled (jumper W9 installed)."
Well, either that was transcribed incorrectly, or the person who wrote it
confused. On the M8192, per EK-KDJ1A-UG-002, pg. 2-1, W_5_ is the halt trap
option, and W9 is... BEVENT recognition. One remove
> Please, can someone from the natural english speakers here explain
> how this sentence is meant:
> "ZKDJB2 [...]. Ensure that halt trap option is disabled (jumper W9
> installed)."
> For me (as a german) that means that the jumper W9 has to be
> installed to run the test,
That would be my fi
>
> Please, can someone from the natural english speakers here explain
> how this sentence is meant:
>
> "ZKDJB2
> This diagnostic tests the KDJ11 basic instruction set including EIS,
> TRAPS and the alternate register set. Ensure that halt trap option is
> disabled (jumper W9 installed)."
>
T
Holm Tiffe wrote:
> Jay Jaeger wrote:
>
> > I have fiche for ZKDJB0, and fortunately it seems to match at this
> > particular error and address.
> >
> > "This test looks for BEVENT to Interrupt when BIT 6 in the BEVENT
> > Control register is set and interrupt priority level is set to 5".
> >
>
Jay Jaeger wrote:
> I have fiche for ZKDJB0, and fortunately it seems to match at this
> particular error and address.
>
> "This test looks for BEVENT to Interrupt when BIT 6 in the BEVENT
> Control register is set and interrupt priority level is set to 5".
>
> The particular error that you iden
I have fiche for ZKDJB0, and fortunately it seems to match at this
particular error and address.
"This test looks for BEVENT to Interrupt when BIT 6 in the BEVENT
Control register is set and interrupt priority level is set to 5".
The particular error that you identify occurs as the result of an E
While checking my repaired KDJ11-A M8192 Board with xxdp I get
the following error:
BOOTING UP XXDP-XM EXTENDED MONITOR
XXDP-XM EXTENDED MONITOR - XXDP V2.5
REVISION: F0
BOOTED FROM DL3
124KW OF MEMORY
NON-UNIBUS SYSTEM
RESTART ADDRESS: 152000
TYPE "H" FOR HELP !
.R ZKDJB2.BIC
ZKDJB2.BIC
ERRO
14 matches
Mail list logo
