Hi Everyone,
Can someone please tell me, what is the passing score for CSPFA and the
number of questions asked in the examination.
Thanks.
Faisal
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=52514t=52514
--
FAQ, list
Hi Everyone,
Can someone please tell me, what is the passing score for CSPFA and the
number of questions asked in the examination.
Thanks.
Faisal
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=52515t=52515
--
FAQ, list
Hi,
You have tried to post to GroupStudy.com's Professional mailing list. Because
the server does not recognize you as a confirmed poster, you will be required
to authenticate that you are using a valid e-mail address and are not a
spammer. By confirming this e-mail you certify that you are not
Hi Everyone,
Can someone please tell me, what is the passing score for CSPFA and the
number
of questions asked in the examination.
Thanks.
Faisal
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=52516t=52516
--
FAQ, list
I have had the same porblems here - definately IOS related. All though I
have to manually erase the flash first, it works fine on the routers where
the flash is stored in DRAM - haven't ried it on a 2500.
This is fixed is ver 12.2 IOS.
Andrew
-Original Message-
From: Chuck's Long Road
The following mail can't be sent to [EMAIL PROTECTED]:
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: (16047 bytes)
The attachment is the original mail
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=52519t=52519
--
FAQ,
You will find the undocumented commands here -
HTH
Dom Stocqueler.
robert
2140
cc:
OK, once again with feeling!
You will find the undocumented commands here -
http://www.boerland.com/dotu/
HTH
Dom Stocqueler.
There is a very good article on CCO entitled Comparing Traffic Policing
and Traffic Shaping for Bandwidth Limiting
which can be found at -
http://www.cisco.com/warp/public/105/policevsshape.html
HTH
Dom Stocqueler
Dom,
what is HTH?
thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=52522t=52463
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL
Hope This Helps!
HTH
Dom Stocqueler
Robert
Mac
cc:
Sent by:
The following configuration should work
1- ip ftp source-interface -source address
through which you will go to the ftp server.
2- ip ftp username 3- ip ftp password 4- exception
core-file
5- exception protocol ftp-protocol to be used
for dumping.
6-
Dear ALL,
I was looking for help on cisco router using the ? command, i found a
command called tunnel, anybody explain the using of that command by an
examples.
Regards
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=52526t=52526
Dear All,
This is my second post regarding ACS2.6 bugs...
The problem is:
As you know;-) I have an acs2.6 server on W2k advanced server , My users
Using it to connect to the internet and sometimes many of my users logged
into my network through the acs and when they disconnected from my system,
I have a similar set-up, ACS on Win2k, what do error message do you see in
the event log?
Magdy H. Ibrahim wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Dear All,
This is my second post regarding ACS2.6 bugs...
The problem is:
As you know;-) I have an acs2.6 server on W2k
Patrick,
The problem not Why my users disconnected... this may happened because he
ended the session stop using the internet.. etc.
The problem is why that user still exist on the ACS server, preventing him
from reconnecting again till I purge him from the ACS server
So why ACS act such
Hello group,
I' am saving the configuration of a Catalyst 3548 on a management station
using the command :
copy running to net via SNMP.
The Catalyst 3548 is running : Version 12.0(5.4)WC(1)
I tried to save the configuration of a Catalyst 4006 using the same command
but it did not work.
The
If you check the user who is listed in the acs they will be in the group
. This is normal when you use NT to
authenticate users by mapping an external db. Why they are can't re-connect
should be in the logs (reports then failed attempts), if they have a
successful authentication then it's
Sorry some text dissappeared along the way the group should say Mapped by
External Authenticaror
Patrick Donlon wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
If you check the user who is listed in the acs they will be in the group
. This is normal when you use NT to
Patrick,
I am using ACS Dbase
and when I check the error I found the following:
exceeds maximum session
So, I am wondering, this user not connected, then why he failed to reconnect
and why he still exist in the connected users Dbase???
Thanx
Magdy
Patrick Donlon wrote in message
[EMAIL
I am trying to create an access-list rule on a router, to deny telnet access
from a router to anywhere except another particular routers IP address.
using the following
access-list 1 permit 10.10.10.1
line vty 0 4
access-class out 1
However it doesnt seem to work. I have tryed inbound
Andrew,
Thank you for the information. But I do not want to write the configuration
to flash.
I want the save the configuration on my management station. I want to send a
command using SNMP from my management station to the switch and retrieve the
configuration back to the management station.
Hello, I purchased my CCNA last year, and since that I have been doing
MCSE but I only have about a year experience with router configuration
etc. I am rather interested in taking the Cisco Security Specialist 1
exams as I would like to specialize more within security. Anyone has
experience with
HI
Is any one from India, Mumbai, passed CCIP?
Paper BSCI is easy or dificult?
Kindly suggest me links where I can get help on the same.
Thanks and regards
Mukesh
CCNA
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=52538t=52538
I think you're tlking about pre-shared keys, the other option is to use
public and private keys with either an outside thrid party or a certificate
authority yourself.
Steven A. Ridder wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Guys,
I have a global financial company that
Peter,
Your response was dead on for what I need - comments inline.
To begin with, keep in mind that bgp routers only reflect best
paths. Hence, all your prepend stuff will generally not be visible on
This had escaped me - I never noticed it working from a single AS
perspective, even
Hello,
When I do debug on Multicasting I get the following message:
PIM-BSR: bootstrap on non-RPF path
Does anybody know what it means?
regards
Tarig
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=52541t=52541
--
FAQ, list
Note that standard acl defines source ip addresses, if 10.10.10.1 is the
destination that you want to allow you must use extended acl:
access-list 101 permit tcp any host 10.10.10.1 eq telnet
line vty 0 4
access-class out 101
Regards
Rafa
-Mensaje original-
De: Casey, Paul (6822)
You might want to think about a more Generic Security background and not
limit yourself to Cisco. I have my CCNP, MCSE, and MCNS certs and am am
doing some Network Security courses at the local Community college and to
get a broader background. With Network Security there is a so much to know
and
A few things to try.
1. In EXEC mode type: sh ip int brief. confirm both ethernet interfaces
are Up Up. If line is down check cabling
2. type debug ip packet and do a ping from a host on one subnet to a host
on the other subnet. You should get a good idea form the output where the
problem
This is probably a silly question but how do the users logout/disconnect. It
could be you need a idle-timeout setting to be applied to the users' group.
Also what version of acs are you running?
Magdy H. Ibrahim wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Patrick,
I am
Can anyone please give me reference to what SNMP Manager's they use?. I'm
trying to successfuly setup a Network Management Console (Using Fluke's
Network Inspector and Microsoft SMS Server) So far the SMS Server has proved
to be more real time and proactive. Any help would be appreciated.
I got Routing and Switching Prep kit by QUE' and CCIE-Study Guide by John
Swartz Todd Lammle, What else do i need to read or what books can you guys
recommend? Do i need to have
routing TCP/IP by Jeff Doyle? I dunno where to focus?! PLS HELP!
Many Thanks!
Message Posted at:
I total agree with you, to many sites, to many worries, to many
configurations..CA will be your answer
Juan Blanco
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Greg
Sent: Monday, September 02, 2002 9:44 AM
To: [EMAIL PROTECTED]
Subject: Re:
100% agree with all your points.
I was more trying to make a point that If given a correct set of
circumstances, anything can be blocked.
Thanks
Larry
-Original Message-
From: Chuck's Long Road [mailto:[EMAIL PROTECTED]]
Sent: Friday, August 30, 2002 4:20 PM
To: [EMAIL PROTECTED]
I am trying to connect a Xyplex 1620 terminal server
to the Console port on a number of Cisco routers.I have
it running (sort of) but I lose a few characters under heavy
load. This is odd, since 9600 baud is hardly heavy
compared to the Xyplex's capacity of 115K per port...
My log files show that 10.78.0.1 address is attempting to get through my
permimeter router . Would anyone know if this is someone really trying to
spoof me or what? And is there any way or tool I can use to determine the
real public source address this entity is coming from ? Does any one know if
for me it's been the other way round ;)
mcast+qos was blood, sweat and tears.
but one big difference between ccnp and ccip is that ccip seems much
more advanced.
-bis
Larkin, Richard wrote:
I found it challenging, but certainly not as difficult as the MPLS exam
which has a much higher pass
Casey, Paul (6822) wrote:
I am trying to create an access-list rule on a router, to deny telnet
access
from a router to anywhere except another particular routers IP address.
using the following
access-list 1 permit 10.10.10.1
line vty 0 4
access-class out 1
However it doesnt
re,
checked it:
http://www.systemtoolbox.com/article.php?articles_id=93
6. Access lists do not apply to traffic originating from the router.
They only apply to traffic passing through the router.
hth
-birgit
Casey, Paul (6822) wrote:
I am trying to create an access-list rule on a router,
I believe all the books that are currently out there are based on the old
blueprint (except perhaps the Cisco Press book, which I have not seen yet).
Earlier today I posted a free update to my own book (the NLI study guide)
that should be applicable to any of the last generation texts. You'll
Dear Majdy,
How are you? Hope every thing is OK with you?
Did you check that the accounting working well, since if you have a problem
in accounting it may cause some like these bugs.
Magdy H. Ibrahim wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Patrick,
I am using ACS
To be more clear, if you have a problem in accounting may be due to low in
memory the user is recorded when he logging in, but not recorded when he
logging out, so he still appear on line to the AS, which prevent him in next
login where you have configured max number of sessions .
Regards
Hey Neal,
This (show ip bg ne advertised-routes) is also something I had never
used - I just always trusted the route servers for that sort of
information. Makes things much clearer.
This command and it's peer, show ip bgp neighbor x/x received-routes are
very helpful and show the
I just did a quick look around my network and 'clns routing' doesn't
seem to work on any of the routers (16xx, 17xx, 26xx) I have in
operation. Is there a particular image train one needs to run or some
trick to getting ISIS working?
--
Neal Rauhauser CCNP, CCDP voice:
There are some old IPv6 beta images running around out there that have
crazy stuff like OSPF/BGP in the image for the Cisco 1000 series routers
- anyone got this stuff lying around? I just dusted off a 1003 and I'd
like it to do more than just access duty in the lab.
--
Neal Rauhauser CCNP,
Frederick,
The usual question comes next: What are you wanting to accomplish?
Do you want something that flashes telling you a router is down? Do
you want bandwidth statistics? Do you have a budget?
Adam Frederick 09/02/02 07:48AM
Can anyone please give me reference to what SNMP
At 04:52 PM 9/2/2002 +, Neal Rauhauser wrote:
I just did a quick look around my network and 'clns routing' doesn't
seem to work on any of the routers (16xx, 17xx, 26xx) I have in
operation. Is there a particular image train one needs to run or some
trick to getting ISIS working?
Usually a
Teltone ISDN Demonstrator (U interfaces only) in original box with floppy
disk. (probably not original power cord, though, as they are generally
fungible) $1,200 plus $15 flat shipping for FEDEX 2nd Day Shipping to
continental US.
2x NM-1V plus 2x VIC-2FXS. Original owner and original
1. Can someone help me in designing the internet network.
I have the following equipments
1. Cisco Pix Firewall 525 with (3) three interface
2. IDS 4220
3. Sun Cobalt - for DNS
4. AS500 with 120 lines (four (4) E1's)
5. Radius Cisco Secure running on Windows 2000
6. 2511 with 16 lines
7. TACACS
Dear Group,
I want to filter Nimda Virus, which spread mainly through the email
exchange. My question is : Can I use NBAR to filter the SMTP POP3 content
like HTTP? If not, is there any other way to do that ?
Thanks
--
Mohannad Khuffash
Network Administrator
Palestine Telecom
Tel:
Yes you can
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121
limit/121e/121e2/nbar2e.htm
Mohannad Khuffash wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Dear Group,
I want to filter Nimda Virus, which spread mainly through the email
exchange. My
Has anyone successfuly implemented a 2500 series router acting as a PPPoE
DHCP Client in an DSL environment. I'd like to remove my Linksys entirely
from my network since it provides too little functionality and control. If
anyone has done so I would be interested in seeing how they configured
As far as I know, 2500 series router cannot act as a PPPoE client. The
function of PPPoE client are bundled only to 800, 1600, 1700, 2600, 3600
series (incomplete list), but not 2500.
To verify, goto http://www.cisco.com/go/fn and perform a feature search for
pppoe client. Then you can see which
You are correct...the latest 2500 IOS version c2500-js-l.122-10b.bin does
not support PPPoE. Thanks!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=52570t=52568
--
FAQ, list archives, and subscription info:
Thanx Shawn,
I was planning for a fast reference so as to work on 4000 series and 6000
series switches and simultaneously take the exams. I hope BCMSN should help
me out.
Anyone aware of the WAN switching exams, books (IGX 8400 platform). Plz
advice.
Regs.
Message Posted at:
I'm wondering which PIX I need. I need something that will work with OC12
155Mbps when saturated. Right now we have a T3 line and will eventually
get an OC3. I would need redundant PIXs. Can anyone recommend a company
that leases them?
Thank you.
Message Posted at:
What is it and where do we really use it I mean in what circumstances?
Can someone pour some light on it?
thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=52573t=52573
--
FAQ, list archives, and subscription info:
Randy,
This appears to be a DHCP server querying its clients. This is pretty
common on a cable modem network. Yes, that is UDP port 67, and as you
can see, it's a broadcast. I wouldn't think it's a hacker, because of
the fact that it's a broadcast. It's probably just someone running a
DHCP
I used nothing but Boson.com exams when I was getting my CCNP two
years ago. Now I have started to work on the BSCI exam towards my CCIP
and I don't see a lot different in the BSCI pretest from what was needed
for BSCN.
Can someone who has passed the BSCI comment on this? I've studied less
Adam,
Take a look at Cisco Info Center.
http://www.cisco.com/go/cic
Clayton Dukes
CCNA, CCDA, CCDP, CCNP, NCC
-=]-Original Message-
-=]From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf
Of
-=]Adam Frederick
-=]Sent: Monday, September 02, 2002 10:49 AM
-=]To: [EMAIL
Hi
That was a brialliant attempt by priscilla. I hope we can get somehing this
to prep for ccie.
Bunmi Isinkaye
Cisco Certification Digest wrote:
Cisco Certification Digest Friday, August 30 2002 Volume 02 : Number 2232
In this issue of the Cisco Certification Mailing List Digest:
Re: Staic
Is your flash read-only? If so just change the config reg and reboot.
Marc Russell
Chuck's Long Road wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I've done this before, and it's not like it's real tough, but.
I am trying to upgrade my IOS images. Neither the Router
I finished BCMSN 12/2000 and I used almost nothing but the Cisco Press
BCMSN book. I did have hands on with cat1900/2900/5500 in large
operations though, but only L2 features in 5500.
I found the Boson exams to be an excellent gauge of my readiness -
http://www.boson.com
puro prasad wrote:
I am testing my ability to post. I sent one earlier that did not get
through.
What are the general thoughts regarding router sims. I have looked at the
demo for Boson's product, and I know that Sybex has one also. I thought the
Syex CCNA vLab was very useful. Thanks for the help.
-Bobby
Brad Ellis wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
12.1(5)T9 enterprise at the moment.
CL: I just finished a bit of research on CCO regarding IOS versions in
general. Very interesting. It might be a good idea to check out the
capabilities and make a detemination for
Hi Dennis,
I was planning to buy the Boson Test 3. Now I will wait for your
updated version. Will I able to receive the info from boson.com as soon as
it is released?
regards
Silju
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=52431t=52235
What are the prevailing thoughts on Router Sims. I need something for CCNP
practice and don't have resources for building a lab or or getting rack time
elsewhere. I looked at the Boson sim. It looks pretty cool, but the demo
doesn't allow config mode so you just look in the window.
---Thanks
check out the following:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/dial
_r/drdrtrvi.htm#1020188
watch the wrap
interesting. thanks for pointing it out.
Chuck
--
www.chuckslongroad.info
still a work in progress,
but on line for your enjoyment
z
Eng. ABDALLAH
On Mon, Sep 02, 2002 at 11:50:17PM +, John Chang wrote:
I'm wondering which PIX I need. I need something that will work with OC12
155Mbps when saturated. Right now we have a T3 line and will eventually
get an OC3. I would need redundant PIXs. Can anyone recommend a company
that
I did a quick search using Cisco TAC's Software Advisor:
http://www.cisco.com/kobayashi/support/tac/t_index.shtml
requires CCO login
and found no IS-IS on the lower end ( 16xx and 17xx ) that you mention
on the 26xx series you need an Enterprise version or a Service Provider
version, so far as
All in all a reasonably productive long weekend. Hope everyone's was
similar.
I've managed to get through quite a bit of the Cisco 12.1 IOS QoS
configuration guide - 250 pages of well, that's tonight's homily. 250
pages of what exactly?
Repetition. I wish I had a dollar for every time the
Hi folks,
I wonder if this is possible. I have our Dialin Cisco Router logging to a
syslog server. Now the debug output is always in the same format but I was
wondering if it can be changed.
Begin paste---
3204: Sep 3 06:37:19: %CALLRECORD-3-MICA_TERSE_CALL_FAILED_REC: DS0
Regards,
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=52584t=52584
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Dear ALL,
How i can see if somebody is spoofing the access list applied on router, or
how i can test it, if the spoofing the access list can be done.
Regards
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=52585t=52585
--
FAQ,
75 matches
Mail list logo
