I've run into this situation while doing some practicing with the 3550s and
some routers
2611--3550---35503640
all ethernet ports are set at full duplex 10 megabit speed.
the 2611 and the 3640 are connected via a vlan tunnel.
everything is working fine, until I turn on
At 8:24 PM + 12/28/02, The Long and Winding Road wrote:
chris kane wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi
Happy Holiday to all.
I have some question that I would like to ask the group regarding OSPF,
Fragmentation and MTU working together.
There
Hello all!!
I am working for a carrier company who uses ip network consisting of Cisco
Routers to transport voice calls.The company deals mainly with pre-paid
calling cards.The customer buys the card and dials a toll free no. to make a
voice call or makes a call thro a dialer program(Installed on
At 3:00 AM + 12/29/02, Lan Wong wrote:
Greetings,
I am currently preparing for the CIPT Exam and was wondering if someone can
suggest the best Boson exam to use for this test.
Thanks in advance
For fairness to vendors, may I suggest that the answers to this question
1. Not be limited
Try to build a Tunnel between 2 endpoint
ss ss wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hello all!!
I am working for a carrier company who uses ip network consisting of Cisco
Routers to transport voice calls.The company deals mainly with pre-paid
calling cards.The
Can share the software to me ? I just use it for testing.
Email: [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=59935t=59935
--
FAQ, list archives, and subscription info:
Hi,
I got the following information during debug.
128K_LL#debug priority
Priority output queueing debugging is on
128K_LL#
3d01h: now 263877385 tokens 16000 pak_size 12032 max_token_limit 16000
3d01h: now 263877750 tokens 16000 pak_size 12032 max_token_limit 16000
3d01h: now 263877754 tokens
Hi,
I just thinking a simple question for a while...
If I have only single router with 2 serial connection to Single ISP and no
BGP was configured.
Can inbound and outbound traffic be load balanced by only using 2 static
routes on both routers?
Also, what happen if either link is down? any
Hi.. Dear Group,
I would like to know why console password doesn't work. I key in my console
password in the following manner. But when I plug in the console, it
straight away give me a switch prompt. Why it never prompt me passord
before showing us switch
line con 0
password 7 XXX
Don't use the 7, just hit
login
password
Richard Campbell wrote:
Hi.. Dear Group,
I would like to know why console password doesn't work. I key
in my console
password in the following manner. But when I plug in the
console, it
straight away give me a switch prompt. Why it never
A late addition to the thread...
Priscilla is correct about using full duplex if it's a point to point link -
as long as the other end supports full duplex - not all of the older routers
do.
Another point to note is that the reported reliability of this link is only
250/255. Anything less than
Going through the old posts...
You may need to get your ISDN provider to set this up. It may be an extra
cost feature.
If it's working, you should be able to see the number using show isdn
active or similar. It may depend on the switch type for all I know - I'm
used to ETSI.
JMcL
This is something I am researching currently. I believe LLQ is CBWFQ+PQ and
the PQ is strict. This means that anything above the allocated rate is
dropped. This is fine for voice traffic where you reserve say 200kbps for 8
voice calls, and anything more than that is dropped, but not suitable for
Yes you can load share - but it wouldn't load share any individual flow - I
believe this ensures the order of packet arrival is correct.
If a link went down, I'm not sure about the packets in the interface queue
(ie, those that had been placed on the outbound interface queue) but I would
suspect
Hi.. When I was setting up my router configuration. It prompts me for secret
password and enable password. But I want to how why I still need enable
password when I have the enable secret? When I type Enable, i will be
required to type in my secret password. Then when the enable password will
Howard C. Berkowitz wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
At 3:00 AM + 12/29/02, Lan Wong wrote:
Greetings,
snip some things
I'll also throw out a general question. A post not long ago asked to
compare the labs of one vendor versus another, and I am affiliated
I came across this on a completely non-IT mailing list. Thought some might
be amused by it.
An interesting tech support problem...
The phone rings: tech support: hello computer tech support customer:
hello my computer was making a strange hissing noise last night and this
morning when I turned
Jenny McLeod wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I came across this on a completely non-IT mailing list. Thought some
might
be amused by it.
An interesting tech support problem...
The phone rings: tech support: hello computer tech support customer:
hello my
Hi All,
Thanks all information.
I am a little bit confused about LLQ. Below is my understanding after
digesting some documentation and feedback from others. Please correct me if
I'm wrong.
1. LLQ=PQ+CBWFQ and PQ is defined by using 'priority'
2. if using 'bandwidth', then I'm not using LLQ. What
Hi
if you set the enable secret then enable password is useless
regards
Kenny Smith wrote:
Hi.. When I was setting up my router configuration. It prompts me for
secret
password and enable password. But I want to how why I still need enable
password when I have the enable secret? When
Hi,
I urgently need Managing Cisco Network Security slides. If any body has
please send me or reply me, I will be greatful
Best Regards,
Wasim Iqbal
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=59950t=59950
--
FAQ, list
21 matches
Mail list logo