there are also a question regarding the size of
the key, should I use the default
Regards,
Bruno Fernandes
- Original Message -
From: Navin Parwal
To: [EMAIL PROTECTED]
Sent: Thursday, March 13, 2003 4:21 AM
Subject: Cepsetup
The configs for the CA server and PIX are given on the cisco
Hi,
I am getting nuts on this, is there any specific steps for configuring the
Microsoft CA Server for working with the IOS and PIX ?
Or do I follow the defaults ?
Is there any doc where I can see this explained ?
The conf on pix and ios side is simple but I don't now if the CA Server is
understand and
more the client is also requesting DH group 5 that the PIX doesn't support.
All this is hapening at Fase 1 .
Is this normal ?
Any comments on this please,
Thanks in advance,
Bruno Fernandes
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=64867t=64867
Should I expect IS-IS in the security LAB ?
Thanks and Regards,
Bruno Fernandes
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=64403t=64403
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Hi,
Just to confirm, does the PIX support TED ?
Regards,
BF
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=63903t=63903
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct
Hi,
What terminal client is used in CCIE Lab ?
Thanks and regards,
BF
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=63596t=63596
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report
Hi again,
I already tried to give the command in the tunnel interface but the
bridge-group command simply isn't there, I am doing this in 2600 router,
with an enterprise image.
Any comments
Thanks in advance,
Bruno Fernandes
The Long and Winding Road wrote
in message news:...
Bruno Fernandes
You will need to boot into monitor mode then tftp the file that you can
get from the TAC and clear de password
EX:
monitor interface 0
0: i8255X @ PCI(bus:0 dev:13 irq:10)
1: i8255X @ PCI(bus:0 dev:14 irq:7 )
Using 0: i82559 @ PCI(bus:0 dev:13 irq:10), MAC: 0050.54ff.82b9
monitor address
Good morning !!!
Is it possible to a Tunnel Interface to belong to a Bridge-Group ?
If yes, how ?
Regards,
Bruno
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=62235t=62235
--
FAQ, list archives, and subscription info:
Hi,
If I have 2 routers on the same NT wich parameter defines what router
will answer the call ?
Thanks in advance,
BF
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=61159t=61159
--
FAQ, list archives, and subscription info:
OK,
Assuming that I don't force the configuration with
# isdn answer1
What variable will determine the Router that it is chosen
Regards
BF
Jens Neelsen wrote in message
news:...
Hi,
it is the number called. You have to configure:
# int bri 0/0
# isdn answer1
Jens
--- Bruno
Hi,
Just a question, looking at the list of equipments for this LAB I see
PIX with version 5.2, this brings to me a question should we use the
conduit or the last access-list commands ?
Thanks and Regards,
BF
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=60553t=60553
OK Rookie question
I have 2 routers connected with a PPP link (serial)
Router A in area 0
Router B in area 20
I have several loopback interfaces in Router B area 20 and announced as
area 20, I have configured the loopback interfaces with C class
addresses. But when I issue a show ip route
point-to-point
Do you agree with this ?
Thanks for your help,
BF
The Long and Winding Road wrote
in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Bruno Fernandes wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
OK Rookie question
I have 2 r
20
Full OSPF adj has been achieved
Thanks for your help,
BF
-Original Message-
From: Michael W. Oliver [mailto:[EMAIL PROTECTED]]
Sent: domingo, 5 de Janeiro de 2003 16:38
To: Bruno Fernandes; [EMAIL PROTECTED]
Subject: Re: OSPF question [7:60342]
do you have the PPP interface on router
Nop,
Having a FastEthernet interface is a must have for what you are doing.
Regards,
Bruno Fernandes
cer wrote in message
news:...
Hi, all,
Can the 2500 series support 802.1Q? If so, what IOS version and
feature set would be needed?
I want to create some logical subinterfaces
Don't forget Kerberos.
Regards,
BF
Wilson, Christian wrote in
message news:...
I have recently implemented the following switches and routers:
4006
6509
3640
2600
My dillema is how to secure remote administration. I have not been
able to find any documentation supporting SSH on the
Hi,
Anyone using Webtrends with PIX Firewall ?
Regards,
Bruno Fernandes
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=56496t=56496
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Hi,
Can any one post some Security CCIE Bootcamp locations in Europe,
because
until now i didn't find anything.
Thanks,
Regards,
Bruno Fernandes
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=55935t=55935
--
FAQ, list archives
Hi,
After passing the written, when may I schedule the LAB ?
Do I have to wait for the update on the site ?
Regards
Bruno Fernandes
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=55651t=55651
--
FAQ, list archives
Hi !!!
If a sensor detects unauthorized activity, are the following possible
action ?
(action1) -- Shutdown Interface
(action2) -- Perform a traceroute to the source of the attack
I am taking the Vconsole tests and some of their answers follow this
actions, but this doesn't make much
Hi !!!
In the case a sensor detects a match in one of its signatures is it
possible for this sensor to shutdown a router interface ??
Thank's in advance
BF
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=54493t=54493
--
FAQ,
Hi !!!
Does SSH works on top of SSL or is SSH an application with its protocol
implementation ?
Thank's in advance,
BF
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=53869t=53869
--
FAQ, list archives, and subscription
correct ?
Thanks in advance,
Bruno Fernandes
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=53578t=53578
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure
For Redundancy you need a router with 2 ethernet port !!!
Regards
BF
John Chang wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
How can I get 2 small switches 2500XL or 3500XL to be redundant. The
router has one 100 ethernet port? Is it typical to use just one 100
port
25 matches
Mail list logo