Hi everybody
I am posting this here because I don't know a right place where I could ask.
This would be part of my question: do you guys know a discussion list like
this focused on Network Infrastructure Monitoring tools ? I tried the
noctools on the newsgroups but it is empty !!!
I am looking
: c2600-i-mz.121-1
cisco 3640 ios image : c3640-i-mz.120-3c
Any advice would be appreciated
Thanks in advance
Cristian
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=31749t=31749
--
FAQ, list archives, and subscription info: http
Sorry I forgot to tell you: it is just about data (if it would be possible).
No concerns
regarding the routing. I am working with static routing. It is a small
config.
Thanks for the question.
Cristian
Brian Whalen wrote:
You talking about routing protocol data, user traffic, or what?
Brian
Yes Eliajah, he is trying to implement an Dialu-up access server (I suppose)
and this is
why he needs ACS and but the users are NT users. I don't know if Unix
could use the
encryption scheme used by MS but yes there is an utility (pwdump) that
export the
accounts and the encrypted
. Learn more then just how to configure x25.
Most
of the x25 questions are obscure theory questions and they are relentless
with them. Again, something we dont use at work.
Cristian Piatnitchi wrote:
Hi
How about the ugly Cisco 700 questions ?
Any questions about this subject
Hi
How about the ugly Cisco 700 questions ?
Any questions about this subject ?
Michael Williams wrote:
Congrats! The BCRAN is difficult, so you should have no problems with the
others (assuming you study well)
Mike W.
Message Posted at:
it seems to instruct the device about the ip addresses of RouterA (if u
neglect one dot
at the end of the first IP address)
S A wrote:
can some one tel me what this comand will do
ip host RouterA 192.8.150.89. 192.6.10.1
Message Posted at:
Try the EtherBoy suite. It works fine for IPs but no URL option to monitor
as far as I know.
HTH
Cristian
-Original Message-
From: Steve Smith [mailto:[EMAIL PROTECTED]]
Sent: Monday, October 29, 2001 7:01 AM
To: [EMAIL PROTECTED]
Subject: Internet monitoring [7:24511]
Hey Gang, I need
Please see the link. I am intrested in this kind of operations:
http://www.cisco.com/warp/public/477/SNMP/snmp_faq.html#Q17
-Original Message-
From: Patrick Ramsey [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, October 23, 2001 7:16 AM
To: [EMAIL PROTECTED]
Subject: Re: snmp question
to the other switch cb
there is no protection against of a failure of switch ca. So I consider is
useless to have redundancy in the access and
distribution layers. Am I wrong ? If yes why ?
Thanks in advance
Cristian
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=23497t=23497
Hi to the group
I would ask you to help me to find out if
I must pass the CCNP exams in a specific sequence
I mean let's say: 640-503,640-504,640-505,640-506.
I woullike to start with Switching exam (640-504).
Is it possible ?
Thanks in advance
Cristian
Message Posted at:
http
3640 model.
Thank for your help
Cristian
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=10268t=10268
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure
!
frame-relay switching
!
interface Serial2/0
no ip address
encapsulation frame-relay
frame-relay intf-type dce
frame-relay route 300 interface Serial2/1 455
frame-relay route 500 interface Tunnel0 400
!
this works...
nni is for network-to-network interface, you can't have a DTE conneting
Hi all
I would like to know how to connect to a specific vty (let's say vty4)
Is there any specific command to do that ?
Thanks in advance
Cristian
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=4148t=4148
--
FAQ, list
Hi
Try this:
http://www.openview.hp.com/library/
Cristian
-Original Message-
From: John Kaberna [mailto:[EMAIL PROTECTED]]
Sent: Friday, April 06, 2001 3:47 AM
To: [EMAIL PROTECTED]
Subject: OT: HP Openview Training Materials
Sorry to bother the group with such an off-topic. I'm
Please let me know if you find out something about this subject
Thanks in advance
Cristian
-Original Message-
From: Vivek Singh [mailto:[EMAIL PROTECTED]]
Sent: Friday, April 06, 2001 12:11 PM
To: 'Piatnitchi Cristian'; 'John Kaberna'; '[EMAIL PROTECTED]'
Subject: RE: HP Openview
Hi all
Please excuse me for this out of topic issue.
I urgently need a software image for one of my BayStack350T (auto sense).
This is a Nortel equipment.
Any idea how and where from to get this software image ?
Thanks in advance
Cristian Piatnitchi
_
FAQ, list
one server to another.
Cristian
-Original Message-
From: Sean Young [mailto:[EMAIL PROTECTED]]
Sent: Monday, March 19, 2001 12:11 AM
To: [EMAIL PROTECTED]
Subject: migrating TACACS server from Solaris to Linux platforms
Hi Everyone,
I am researching on information TACACS server running
Try this it works on 1600 . I think is better to send us
the config that you are using.
Cristian
!
version 11.3
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname C1600
!
enable secret 5 //
enable password ??
!
chat-script dial
Try docs.soalris.com
there you have almost everything in PDF format.
If you need an accelerated training take a class
if not just start working with it.
Do everything that you are doing just under Solaris not as usually
on a Win box
Cristian
-Original Message-
From: Circusnuts
understood from Cisco's site
it isn't.
Am I right ?
Thanks in advance
Cristian
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
0xC223, datagramsize 16
44609: 2d04h: Se0 PPP: I pkt type 0xC223, datagramsize 16
44610: 2d04h: Se0 CHAP: I FAILURE id 84 len 14 msg is "E=691 R=1 "
44611: 2d04h: Se0 PPP: I pkt type 0xC223, datagramsize 16
Thanks for help
Cristian Piatnitchi
__
e.
Thanks in advance for help
Cristian Piatnitchi
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
that.
Thanks in advance
Cristian Piatnitchi
a CCNA aspirant :-))
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Hi all
I am trying to set up a C1600 to connect to a remote site running a Routing
and Ras software (MS NT4 server)
The RRAS is set up to allow to remote host to request an IP address.
Please help me to understand where I am wrong.
The modem disconts as you can see after he succesfully execute
Cristian
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]
Sent: Thursday, February 08, 2001 2:59 PM
To: [EMAIL PROTECTED]
Subject: Dialout with ACS Server - Controlling outgoing phone number
Hello,
I want to know if it is possible to control the outgoing phone number
Hi all
I need an advice. I have to choose between the set up
ACLs on the router and to set up ACLs on the servers's
swtich.
Which one is the best solution and why ?
Thanks in advance
Cristian Piatnitchi
_
FAQ, list archives, and subscription info: http
Hi all
1.What is the problem you are trying to solve?
Between my access router and the main servers will be installed a VPN
software. My acces router uses TACACS+ for authentication.
2 What is the purpose of the access lists?
I defined there some access lists for access our servers.
3. Is
to dial-up automatically
and to supply a username/password pair in order top establish a PPP
connection with
the remote server.
I Have been studying the CISCO site and I can not understand what kind of
config should I use.
Could you help me ?
Any link will be usefull
Thanks in advance
Cristian
: 10.10.10.1 2001 (line 1)
I have connection but neither local echo nor answer from the moedm for
AT commands.
Any explanation for that ?
Thanks in advance
Cristian
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct
Hi Kevin
CHeck the cisco ftp site I found there
the free TACACS+ server a few weeks ago. If the memory helps me
there is a free version for Solaris. You have to compile it.
Use Copernic to find the exact address. Search free TACACS
Crisitan
-Original Message-
From: Kevin Wigle
Hi Rico
Take care ! I had many problems with set up a STP, trunking and
802.1q between Cisco 5000 and Bay Networks.
I gave up because finally I used just 1 link between these devices.
I was surprised to see that FastEtherChannel on Cisco means trunking on
Bays'.
This is what somebody from
that the page show me the command
tacacs-server last-resort
here :
http://www.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/29_35xu/cmdref/m
acrcli.htm#xtocid24729124
but the Cat2900 seems to do not know about the command. Any explanation for
that ?
Thanks in advance.
Cristian
Ps. I would like
for your advice.
Thanks in advance
Cristian
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Hi Adam
Thanks for the link. Now the question is clear for me.
Yes is is true ssh is supported starting with IOS 12 but IOS 12.1 not
IOS 12.0
Is the upgrade free from a version to a higher one. I mean from 12.0 to 12.1
?
Thanks for help.
Cristian
-Original Message-
From: Adam Quiggle
Sorry I was wrong it seems to be supported starting with
12.0(5)S. My questions is still up. How about the upgrade ?
Thanks
Cristian
-Original Message-
From: Piatnitchi Cristian
Sent: Wednesday, January 03, 2001 12:19 PM
To: 'Adam Quiggle'; Piatnitchi Cristian; '[EMAIL PROTECTED
Is there any other solution for a secure
communication/session with a remote router/switch ?
Thanks in advance
Cristian
-Original Message-
From: Piatnitchi Cristian [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, January 03, 2001 12:19 PM
To: 'Adam Quiggle'; Piatnitchi Cristian; '[EMAIL
hardcoded; DTP only appeared with CatOS 4.2. See the next section, dedicated
to DTP. "
What is wrong ?
Thanks for the previous answer !
Cristian
-Original Message-
From: Stephen Skinner [mailto:[EMAIL PROTECTED]]
Sent: 15 noiembrie 2000 10:06
To: [EMAIL PROTECTED]
Subject: Re:
on every
VLAN
in the network. Make sure your network is loop-free before disabling
spanning tree.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: 13 noiembrie 2000 19:32
To: 'Piatnitchi Cristian'
Subject: RE: Cat5000, BayStack350 and 802.1q trunking
Are you
it !
Catalyst trunking ports : 2/18, 2/19
Where is the mistake ?
Thanks in advance
Cristian Piatnitchi
Cat5505*
**
set vlan 1 name default type ethernet mtu 1500 said 11 state active
#spantree
it !
Catalyst trunking ports : 2/18, 2/19
Where is the mistake ?
Thanks in advance
Cristian Piatnitchi
Cat5505*
**
set vlan 1 name default type ethernet mtu 1500 said 11 state active
#spantree
Hi all
I set-up the priority queuing.
How do I verify that priority queuing works on a serial interface (or on any
other kind of interface ) ?
Is there any IOS command for that ?
Does anybody want to explain me ?
Thanks in advance
Cristian Piatnitchi
_
FAQ, list
memory
--Scott
Piatnitchi Cristian wrote:
Hi all
Could anybody instruct me how to find the correspondence between
MAC addresses for connected devices and those ports where devices
are connected ?
Environment: Catalyst 5000 series and SNMP.
I tried with rfc1493.mib
Hi
I suppose u have to set-up through the DHCP the following settings:
-Wins Server address for your clients (You have to install one if there is
none)
-Node Type= H(Hybryd)see the MS docs
If u don't have Wins and you don't intend to install one you have to setup
the router interface to
for dot1dTpFdbPort, so I cant guess
the correspondence of MAC addresses with their source ports.
Cristian Piatnitchi
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_
UPDATED Posting Guidelines
ip helper 10.12.1.6
Where am I wrong ?
Cristian Piatnitchi
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ
Hi all
I have to monitor the traffic for 3 ports configured to work in trunking
Is there any possibility to monitor these values trough the SNMP ?
Does anybody know the OID and the mib that should I compile for that ?
Thanks in advance
Cristian Piatnitchi
Hi all
I have to monitor the traffic for 3 ports configured to work in trunking
Is there any possibility to monitor these values trough the SNMP ?
Does anybody know the OID and the mib that should I compile for that ?
Thanks in advance
Cristian Piatnitchi
?
Thanks in advance
Cristian Piatnitchi
___
Say Bye to Slow Internet!
http://www.home.com/xinbox/signup.html
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives
that on an external Cisco router
(2600). How do I do that ?
Can anybody give some ideas ? I am confused by QoS docs. Any help docs or
links ?
Thanks in advance
Cristian Piatnitchi
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list
OT: NT RRAS and leased line
Does in work ?
Has anybody succeded in working with that ?
Any useful link or advice ?
Thanks in advance
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info:
?
Thanks in advance
Cristian Piatnitchi
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
for a correct understanding of what I am
trying to do ?
Thanks in advance
Cristian
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations
53 matches
Mail list logo