"Dennis Bailey" wrote in message news:...
> Hi Peter,
>
> Here is how I would change the configs:
>
> The helper-address would go on the fast ethernet interface of both routers
> not the serial interface,
>
> Get rid of the secondary address and NAT on the
Hi Juan,
This link may be helpful. The is the exam objectives for CID test from the
cisco website. I have found that it is best to use these as a guideline for
studying regardless of the study material used so that I do not focus too
heavily on areas not covered.
http://www.cisco.com/warp/publi
Isn't this just the same thing as this group??
""Suranjith Ariyapperuma"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Dear Friends,
> Is forming a Virtual Study Group a practical idea ?. if yes would anyone
be
> willing to form one?, currently I am studying for CCNP routing e
Anybody been to these classes yet? Feedback?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=30266&t=30266
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosu
Sorry for the OT.
Wanted to Buy:
Cisco/HP 1516 Hubs
Any quantity
New or Used
seller must offer a 90 day warranty
Please contact me offline.
Thanks,
Dennis
([EMAIL PROTECTED])
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=22147&t=22147
-
I am wondering if anyone has been able to use CiscoSecure ACS for controling
access to router console and vty lines. I am currently running ACS 2.5 and
am using it for authentication of dialup and vpn remote access users. I
have been trying to figure out how to use it to control access to my rou
On the clock question, the smaller routers do not have a battery to keep the
clock settings during a reboot. You could add ntp to your configuration so
the clock is set automagically when the router's links come back up. Not
sure what you are asking on the second question but why wouldn't you fo
An easier way to see if you have any active routes would be sh ip eigrp
topology active
You could also add 'eigrp log-neighbor-changes' (double check the dashes)
under the eigrp configuration. Make sure you have no logging consol in your
config as well and either log to a syslog server or to a b
The Cisco Press 'Cisco Internetwork Design' and Top Down Network Design
books along with the exam objectives from CCO is what I used.
""Dale Frohman"" wrote in message
news:[EMAIL PROTECTED]...
> Hello Group,
>
> I was wondering what book is the best in preparing for the CID exam.
> I noticed a
Using software which designed for use on a cisco hardware platform on
another hardware platform is a violation of the software license(see General
Limitations (i). Be careful, read the license. A lot of the people here
are here to study for cisco certs which can be revoked for doing stuff like
t
Simple pre-sales level stuff on 'stratacom' is all I remember having to
know. Number of slots, backplane, etc. You will do better in your search
on CCO if you search 'wan switching' instead of stratacom.
As usual, pay special attention to anything that has been EOL for a couple
of years now ;-)
Chuck,
I have just about everything together for my CIE home lab but am having
trouble finding a complete CaveBear Percussive Maintenance Kit. The site
recommends several items which I have but was wondering if you or anyone
else on the list has ever tried to pass the test without hands on or at
Nasty stuff. I had similar issues with GSR's recently. If you aren't
careful, you might end up with hardware that is not compatible with the IOS.
What I found was that some of the new versions of IOS (i am running
12.0.16S) are not compatible with some of the older versions of hardware. I
don't
This is what a simple search on cco turned up.
http://www.cisco.com/warp/public/707/cmatrix.shtml
""Mohammed Saro"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I want a VPN dialer and a sample configuration to dial to an ISP then
> establish VPN between VPN client and the m
You might want to add the Lou Rossi Token Ring whitepaper at www.ccprep.com.
I found it was helpful.
""Tricia Wang"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi everybody:
> I am going to take my CCIE written exam really soon. But before I set
up
> a date to register th
It takes a couple of weeks. In the meantime, the archives are available on
the groupstudy website.
""[EMAIL PROTECTED] (Timothy Ouellette)"" wrote in
message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hello all. I have recently passed the tried to join the CCIE lab
> groupstudy by sending a
""kaushalenders"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> hi,
> can any body can tell a good news group for unix and solaris
> thanxs
> kaushalender
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=16099&t=15833
-
Depending upon the router platform you can use NBAR.
I am just really depressed right now because there are costumers getting
involved in our business. I knew I wasn't the only one who liked to get
dressed up but now think of the pressure that there will be with
professionals out there..
AT&T has a data center for co-location and hosting on 11th Ave in NYC.
Email me offline if you want the name of our rep. They have done a good job
for us.
Dennis
""Jonathan Chung"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi everyone.
>
> I would like to know who can prov
Experience and the archives show that 1 & 2 should be enough.
""Favio T"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> how is Boson test 3 i am thinking of buying it
> Thanks
>
> Felix da Cat
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=16074&t=15864
---
Get the ccprep.com broken ring whitepaper and know it. If you are
consistantly passing the Boson tests you are ready.
""Wright, Jeremy"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I just wanted to get a suggestion as to where to go next for my CCIE
written
> studying. This
If this is a server port then I would troubleshoot as follows:
Set speed/duplex on both ends of the connection and disable all other
autonegotiation features:
set port channel 8/48 off
set trunk 8/48 off .
If problem continues,
Replace the patch cord from the server to the jack (or the server to t
Oh my god! Not fatal error 1925! Place the computer in a box and send it
to:
Bill Gates
Redmond WA
""parky chan"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Dear all
> My office applicate is Easy Clear but when i use this
> function to print out
> document ,
>
Chuck is right on the money. I used nearly the same strategy for studying
but did not spend enough time on the Token Ring papers. Passed anyway but
could have been a little sharper on those papers. For practice tests I used
Boson #1 and #2 from www.boson.com If you have taken the CID test, tha
www.cisco.com/tac
>Top Issues
>Password Recovery
""KroyweN"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I am having hard time in hacking password in my cat 1900 xl catalyst i
also
> have 2820 but i dont know how to hack the password. Any instruction?
> Thanks
> Kroywen
M
I used the Cisco Press Books "Cisco Internetwork Design" and "Top Down
Network Design". The first one was probably enough for the exam, but the
second helps to put things into real world perspective.
As with all the exams, use the exam objectives on cisco.com/certifications
to avoid putting too
The new O'Reilly book is really good. Starts from the bottom and works its
way up.
http://www.oreilly.com/catalog/cisrtlist/
""Thomas"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi all,
>
> I am very weak on the Access-list and would like to find dig more on this
> area.
How many remote sites off each 7500?
Are the remote sites all 'stub' sites?
Do the remotes have connections to both 7500's (ie. primary and backup pvc)?
The passive-interface idea you have is probably a good one.
If your remote sites have a connection to both 7500's, make sure that you
have outb
access-list 101 permit tcp any any established
access-list 101 deny ip any any
""Joe Morabito"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> How can you apply an access list to a serial interface to block all
internet
> traffic without disabling the inside people from getting
You don't need an ip address on port 2/1 on the 6509. The ip address you
want to set on the 6509 is int sc0 which is the management interface on the
6509:
set int sc0 up
set int sc0 192.168.3.100
set ip route 0.0.0.0 192.168.3.254
(I may be slightly off on the syntax, just use the online help i
I think it's hit or miss on anything sooner than March 2002. Basically, I
think you can 'luck out' if you happen to search for dates at the same time
someone may be cancelling and re-scheduling or trying to swap a date. I
scheduled mine last week and came up with an available date during this
mo
This happened to me once and turning off fast switching on the BRI interface
made it work. command is 'no ip route-cache'. I am not sure if that will
solve your problem but give it a shot.
I also notice that you are routing for network 10.0.0.0 and 192.168.0.0 but
do not see any interfaces in t
check these out--
http://www.cisco.com/warp/public/cc/pd/si/ig8400/
http://www.cisco.com/warp/public/cc/pd/si/ig8400/prodlit/index.shtml
""zee k"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi all,
> Could you please post links to good Cisco IGX presnetation material or
>
Try this
http://www.cisco.com/networkers/nw01/
""dre"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Where are they?
>
> -dre
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11627&t=11518
--
FAQ, list archive
if your isp doesn't have a news server that you can download from you can
access from:
http://groups.google.com/groups?hl=en&safe=off&group=comp.dcom.sys.cisco
""Axilleas Likotsetas"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> thanks
> and the news server?
>
> O "Axilleas Li
comp.dcom.sys.cisco
""Axilleas Likotsetas"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> can anybody tell some other newsgroups abput cisco?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11363&t=11361
--
F
36 matches
Mail list logo
