problem.
Hope that Helps.
Regards,
Don Orlik
Technical Consultant
ArQana Technologies Inc.
Professional Services Organization
Internetworking Practice
""Hitesh Pathak (CSD-BBYRO-RTSG)"" <[EMAIL PROTECTED]> wrote in message
EA1BE
thin a switched environment is a whole other topic.
Hopefully, this clears up any questions that people may have.
Regards,
Don Orlik
""Chuck Church"" <[EMAIL PROTECTED]> wrote in message
004001c02451$c38fb560$ae0a48a6@superdave">news:004001c02451$c38fb560$ae0a48a6@
To make it easier on everyone, here is the link to Cisco's Website.
CCNP Track
http://www.cisco.com/warp/public/10/wwtraining/certprog/lan/programs/ccnp.ht
ml
CCDP Track
http://www.cisco.com/warp/public/10/wwtraining/certprog/lan/programs/ccdp.ht
ml
I hope this helps.....
Don Orlik
&q
decisions or a personal one. It
is really up to you. If it were me implementing this solution, I would use
NAT for sure and most likely private addresses.
Regards,
Don Orlik.
Oscar Rau <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> We are
the inside. Ensure there is
an open conduit or something along that line.
Hope that helps.
Don Orlik
""Dennis Ighomereho"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I would appreciate it if anyone can help me o
You can use either of the three or you can add the users manually to the
router. Depending on the amount of users, you may want to use a TACACS+
Server or something along that line.
Don
"Patrick Gannon" <[EMAIL PROTECTED]> wrote in message
60B00056DADCD311BC7600508B9B1AC607BBB7@SERVER2">news:60
In the frame relay interface use the following command. backup-interface
bri0 (or whatever the bri interface is).
Configure your ISDN interface the same as you would normally and this should
bring up the line if the frame relyay goes down.
Don
""Omer Shommo"" <[EMAIL PROTECTED]> wrote in messag
iated..
Don Orlik
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
It looks like that from your show version that the software version running
on your sup engine is 4.3. You should go to 5.4 or 5.5.
Don
<[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
>
>
>
>
> Ladies and gents,
>
> I received a new module WS-X5234 ( RJ-45 10/10
including the 2600, 3600, MC3810, and
AS5300.
Other then that understand the basics for Analog Telephony and Digital Voice
Technologies.
To study I used the Notes from the Course.
Best of Luck to all in whatever you persue.
Don Orlik
___
UPDATED Posting Guidelines
Most likely if there is different networks, you may
need to use a IP helper address. Take a look at that command because
I feel that could be your problem.
""Atif Awan"" <[EMAIL PROTECTED]> wrote in message 010701bfe84f$83c74bc0$050100c0@Tech">news:010701bfe84f$83c74bc0$050100c0@Tec
11 matches
Mail list logo