Both of them are common.
Eigrp is used mostly with cisco routers as it is easy to configure and maintain
.
Ospf needs before implemented it very well design.
In your case I will use EIGRP.
But if you are familiarly with OSPF go for it.
Regards
Elias Aggelidis
CCNP + CVOICE + SECURITY
I think you are on the wrong group !
- Original Message -
From: "Sam Adams" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, January 05, 2001 10:24 AM
Subject: RE: ccie lab
> What the heck is a ccXX? CCNA, CCDA, CCDP, CCNP, CCIE?
>
>
>
> -Original Message-
> From: [EMA
plus is the magic word
regards
- Original Message -
From: "Olden Pieterse" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, January 04, 2001 11:24 AM
Subject: x25 translation
> Hi there
>
> I have a customer that needs to do x25 to tcp translation on a 2511 .
> What images wi
You can use both Console and Aux to connect a modem,
but as Tony is syggesting use only the console for this kind of thinks !
Regards
Elias Aggelidis
CCNP + VOICE + SECURITY
- Original Message -
From: "Sam Adams" <[EMAIL PROTECTED]>
To: "'Andrew Whitaker'
See my inlined comments !
Regards
Elias Aggelidis
CCNP, CVoice, Security
- Original Message -
From: "Amit Gupta" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, December 28, 2000 7:44 AM
Subject: Voice Over IP
> Hi everybody,
>
> I need assi
IT DOES NOT SUPPORT TRUNKS !
Only 26xx and 36xx can do it !
- Original Message -
From: "Mark Krysinski" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, December 20, 2000 3:58 PM
Subject: ISL
> Does anyone know if you can use a 1750 with a 10/100 port in place of a 2600
> s
Try to get
as much seminars as you can
and read the CCO again and again !
After that get the Boson test
to get the expresion how the test is.
Regrds
Elias Aggelidis
CCNP + Voice + Security
- Original Message -
From: "Manny Colon" <[EMAIL PROTECTED]>
To: <[EMA
test with using only the Boson
tests and try to memorised all questions and answers !
BUT YOU WILL NEVER BE AN NP !
Hope this helps
Regards
Elias Aggelidis
CCNP + Voice + Security
- Original Message -
From: "Desai, Inamul" <[EMAIL PROTECTED]>
To: "'Andy Wu'
Search for ISL trunks !
There a lot PDFS under this !
Regards
Elias Aggelidis
CCNP + Voice + Security
- Original Message -
From: "mindiani mindiani" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, December 20, 2000 10:24 PM
Subject: VLAN Trunking on
Good Job !
Try to get some specialzations befor
you go for the CCIE as I am doing !
CCNP
Voice + Security and more to come
Regards
Elias Aggelidis
- Original Message -
From: "Ryan Ngai Hon Kong" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, Dec
Who says show ?
Catalyst 4000 IS SUPPORTING ISL
but only for the gigabit ethernet ports which is on the supervisor engine (not
the internal ones).
The internal one is supporting only 802.1q.
Regards
Elias Aggelidis
CCNP + Voice
- Original Message -
From: "Craig E. Smith&quo
Go for it.
DSL is faster that F/R and for my personal opinion is
better than F/R.
Of course DSL is coming through pure PSTN wires !
Take this in mind before you make your selection. But DSL is cheaper
that F/R.
Regards
- Original Message -
From: "Rick Stanger" <[EMAIL PROTECTED]>
To: <
The CIT course, the ACRC , and of course BOSON tests.
This 3 make me pass the test and take my CCNP !
- Original Message -
From: "John Nenye" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, December 11, 2000 11:23 PM
Subject: FRS 2.0
>
> Has anyone on the group taken the FRS 2
at
is using NETBios.
Hope this help
Regards
Elias Aggelidis
CCNP + Voice
- Original Message -
From: "Hubert Pun" <[EMAIL PROTECTED]>
To: "Cisco Study Group" <[EMAIL PROTECTED]>
Sent: Tuesday, December 12, 2000 5:17 AM
Subject: DLSw help
> Here is the
What exactly are you looking for ?
The attached PDF file has a lot examples how to perform FR/switching.
Regards
Elias Aggelidis
CCNP + Voice
- Original Message -
From: "Ken Yeo" <[EMAIL PROTECTED]>
Newsgroups: groupstudy.cisco
To: <[EMAIL PROTECTED]>
Sent: Wednes
If you want to see if your Fast Ethernet Channel is really passing traffic
try to generate big traffic and measured it using lets say MRTG.
There is a measurement program called ttcp which is generating udp packets
and is measuring the line speed !
Regards
Elias Aggelidis
CCNP + Voice
It should work !
The way I am implementing tunnels is using source , destination the loopbacks
of the boxes !
Added to that for just managment reasons I am putting an IP adress on the tunnel
in order to see if the tunnel is up and running !
Regards
Elias Aggelidis
CCNP + Voice
- Original
For all of those questions the answer is on the www.cisco.com
Even if you do not have an account there you can do a search for all of this
types
of questions !
Added to that RTFM !!
Regards
Elias Aggelidis
CCNP + Voice
- Original
Only your Certification signed from John Chambers !
Nothing else .
Elias Aggelidis
CCNP + Voice
- Original Message -
From: "REMI IBIDUNNI" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, December 06, 2000 9:47 AM
Subject: CCNP
>
> Folks,
&g
You can find some laser links that can support 100 Mbps - 622 Mbps
The only thing that required is optical View.
If this solution seems to you to expensive you c an try the aironet 340 product
.
It gives 10 Mbps with small cost .
Regards
Elias
- Original Message -
From: "Hartnell, Georg
Title: RE: More on VLANs
Greene,
MLS routing is enabled by default on the 6500 !
The commands you are syggesting is used only if you have
an external router , that it will do the MLS (such a 7200 with a 5500 )
!
Ben,
If you have enable the Intrface Vlan 200 on the MSFC
and assign an IP
When you are using 802.1q
DO NOT use the management VLAN (I mean VLAN 1)
Vlan 1 on the ISL trunks is used only for management (as CISCO says)
and Vlan 1 is the default Trunk Vlan on 802.1q.
If you use VLAN 1 on the 802.1q you will find out that big packets (> 1482 )
would not be processed correc
As you have already notice the PIX 520, 515 is an Intel based PC !
Yes you can put a non CISCO ethernet card as it uses PCI techology
but you is gone to give you the codes to upgrade your PIX in order to support
this 3rd interface ?
If your IOS is restricted it will see only the 2 cards ! Added
What to say !
If you want to use the GD then you have to forget the Voice function !
You can try the 12.1 ED but I want feel well with it.
You have to wait until the 13 to get Voice on the GD IOS.
Regards
- Original Message -
From: "Kevin Wigle" <[EMAIL PROTECTED]>
To: "cisco" <[EMAIL P
You are making a BIG MISTAKE !
Switches are working on L2 as and HUBs.
So when you are connecting a Hub to a switch you must
use a crossover cable !
Regards
Elias Aggelidis
- Original Message -
From: "Bradley J. Wilson" <[EMAIL PROTECTED]>
To: "cisco" <[E
www.cisco.com !
- Original Message -
From: "Nigel Taylor" <[EMAIL PROTECTED]>
To: "jeongwoo park" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Friday, December 01, 2000 5:06 AM
Subject: Re: picture of router?
> Visio. Enterprise...
>
> Nigel...
>
> - Original Message -
> Fr
As you can see the DLCI 16 is DELETED !
This means that DLCI 16 does not exist !
Regards
- Original Message -
From: "Adele Galus" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, November 30, 2000 7:15 AM
Subject: Frame Relay - Real Life Problem
> This is a configuration pro
Dear ALL,
there is no way to verify the CIR that the FRAME-RELAY provider
is giving you !
If you have defined the FRAME-RELAY map you can
execute the
sh frame-relay pvc X (x is your DLCI number)
If you are using traffic shaping you will see
more information including you queuing scheme.
Hope t
Elias Aggelidis ALGOSYSTEMS SA
Network Engineer 4, Sardeon Str
CCNA, CCNPNea Smyrni
CVOICE Specialised
PICA Administrator
Dear Aaron,
Good job !!!
I hope I will join you in the next semester !
Regards
Elias Aggelidis
CCNP+Voice
- Original Message -
From: "Jonathan Hays" <[EMAIL PROTECTED]>
To: "Aaron K. Dixon" <[EMAIL PROTECTED]>
Cc: "GroupStudy
sh log
- Original Message -
From:
karthikeyan
To: [EMAIL PROTECTED]
Sent: Tuesday, November 28, 2000 8:21
AM
Subject: In Router How to find ...to
which m/cs the syslog logging is enabled.
Hi Group,
How to find in Routers to
which machines the sys
ip http authentication is your command !
There you can set the authentication for either enable password or local
username/password
Regards
- Original Message -
From: "Cisco Guy" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Friday, November 24, 2000 10:05 PM
Sub
I have seen this question in one of the cisco exams !
The obvious answer was BUG ERROR !
- Original Message -
From: "John Neiberger" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, November 23, 2000 4:22 AM
Subject: Re: Line Down , Protocol Up ?
> Think this through startin
I have the same problem.
You can not make her understand what really CCIE is only when
you are going to take the big money !
Regards
- Original Message -
From: "Kevin Keay" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, November 22, 2000 9:51 PM
Subject: CCIE
>
>
> Hey Gr
FYI : WCCP is working with GRE ! DO NOT FORGET THAT .
ADDED to that in some versions (12.0.X) if you have enabled the CEF
THE ROUTER IS NOT Forwarding any packets to the WEB CACHE ENGINE !
Regards
- Original Message -
From: "Kirk Bollinger" <[EMAIL PROTECTED]>
To: "Jon Tucker" <[EMAIL PRO
Hi,
I do not think that you need to setup a LAB
to pass the CCNP.
But if you would like to do it you must have a 55xx, 36xx, 7xx, 25xx and
maybe a 4xxx
Regards
- Original Message -
From:
Michael Ross
To: [EMAIL PROTECTED]
Sent: Friday, November 24, 2000 1:51
- Original Message -
From: "Tim Lovelace" <[EMAIL PROTECTED]>
To: "cisco" <[EMAIL PROTECTED]>
Sent: Wednesday, November 22, 2000 4:16 PM
Subject: New Questions
> Greetings. I am new to the list. I am currently working on my CCNP and then
> I will be going to the CCIE. I am in the proces
Changing IOS maybe ???
Have you make any research about bugs ?
Regards
- Original Message -
From: "peter whittle" <[EMAIL PROTECTED]>
Newsgroups: groupstudy.cisco
To: <[EMAIL PROTECTED]>
Sent: Friday, November 24, 2000 12:13 AM
Subject: CIPT 2.0 - flapping CAT 6608
> Hi,
>
> I am worki
November 23, 2000 3:52 PM
Subject: Re: Stupid Cat 5xxx question
> well, the cable is the same cisco RJ-45 cable used for any console. it's in
> fact "inverted" meaning pin1 attaches to pin 8 of the other side and so on.
>
>
> ""Elias Aggelidis"&q
NOPE !
It has an RJ-45 connector which you can use it
with both DB25 or DB9 connectors from Cisco and
a STRAIT cable NOT ROLLOVER
ELIAS
- Original Message -
From: "Timothy Metz" <[EMAIL PROTECTED]>
Newsgroups: groupstudy.cisco
To: <[EMAIL PROTECTED]>
Sent: Thursday, November
NOPE !
I have seen it many times.
Check IOS (if they do not match put the same on both boxes)
I am trying to remember what was my problem (I was using ISDN)
When I will find my notes I send to you what I have done.
Regards
Elias
- Original Message -
From: "James D. Wil
- Original Message -
From: "James Wilson" <[EMAIL PROTECTED]>
To: "Naveen Sharma" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Thursday, November 23, 2000 9:53 AM
Subject: Re: HSRP
> The MAC address criteria is used when the routers bidding for active status
> have the same priorit
do you use tcp header compression
If yes try remove it first .
Regards
Elias
- Original Message -
From: "Brian" <[EMAIL PROTECTED]>
To: "dennis rufolo" <[EMAIL PROTECTED]>
Cc: "GROUPSTUDY" <[EMAIL PROTECTED]>
Sent: Thursday, November 23, 2000 8:47 AM
Subject: Re: EIGRP Mystery??
See my comments
- Original Message -
From: "C.M Leong" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, November 22, 2000 12:26 PM
Subject: Show ip int brief
> Hi :
>
> When I issue a "show ip int brief" command , what is
> the correct info should I get for BRI0 ( BRI0 is f
Just a new member to the list.
I am working for 3 years in an network company
and I am planing to get my CCIE in the next 9 months.
Regards
Elias Aggelidis ALGOSYSTEMS SA
Network Engineer
45 matches
Mail list logo
