do you use tcp header compression ????
If yes try remove it first .
Regards
Elias
----- Original Message -----
From: "Brian" <[EMAIL PROTECTED]>
To: "dennis rufolo" <[EMAIL PROTECTED]>
Cc: "GROUPSTUDY" <[EMAIL PROTECTED]>
Sent: Thursday, November 23, 2000 8:47 AM
Subject: Re: EIGRP Mystery??
>
> can you replicate this? did you capture any debug output?
>
> brian
>
> On Wed, 22 Nov 2000, dennis rufolo wrote:
>
> > Does anyone have a suggestion or solution???
> >
> > Frame Relay hub and spoke network. 2 central site 3640's each with a
> > T1(on each) set to dlci 900
> > on one and dlci 901 on the other.
> >
> > 85 remote locations, 1750's 56k wic1s 32k CIR. 42 mapped to dlci 900-
> > 43 mapped to dlci 901.
> >
> > We are using eigrp on a 10.0.0.0 network. HERE is the question. ( by
> > the way I have a current open T.A.C. case and they seem to be stumped)
> >
> > 4 remote locations dropped from our network. couldn't ping, telnet, or
> > pass traffic--YET
> > the show frame pvc # command on both the hub(3640) and the spokes(1750)
> > showed ACTIVE.
> > We were able to dial into the remote routers.
> >
> > After looking at all the obvious we tried to map a STATIC route and
> > bang!!! the circuit came right back.
> >
> > Why is this needed at all when we are using eigrp? Why only on these 4?
> >
> > I would appreciate any ideas. Thanks
> >
> > Dennis Rufolo
> > Ewing Irrigation Products
> > Phoenix,Az.
> >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
> -----------------------------------------------
> Brian Feeny, CCNP, CCDP [EMAIL PROTECTED]
> Network Administrator
> ShreveNet Inc. (ASN 11881)
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
