Dear Group,
Has anybody worked on this type of connectivity:-
x.25 Ethernet x.25
SUN BOXCISCO2620cisco2620SUN BOX
RS232RS232
My requirement is that The SUN box will talk to CISCO router with 2 serial
Dear Group
I am having one 6509 switch with 2 sup module cards (one in redudent mode).
All of a sudden from past couple of days i am observing that my SUP 1 modules
status LED is not glowing. Same time my sup2 modules management LED is
glowing
RED. But still my switch is working fine.
When I
is RED.
what else can u suggest...
regds
Arun wrote:
hi
You can try taking out the modules and putting them back i have seen that
this do the job most of the timedo this and see if it works ...
Regards
Arun Sharma
Infotech wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED].
Friends,
Is is possible to have multiple backup interfaces defined for one single
interface. If it's possible then how to set the priority.
any suggestions.
regds
Get free email and a permanent address at
Dear Group need your help.
###
R1 -- R2 - ISDN modem type TA device
##
R1:- Cisco 1700 with One Leased Line (S0) as primary link
One BRI (BRI0) as backup to Leased Line
R2 :- Cisco
or
inter-vlan routing?
Chuck
Once worked in a brokerage firm where during market hours 90% of my traffic
was broadcast - and a good thing, too!
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
Infotech
Sent: Thursday, April 12, 2001 10:17 PM
Infotech wrote:
Group Pls help me with this config:-
cat 4k switch---cat6509 vlan 1 Vlan2
NT PDC 1NT PDC 2
USERx USERy
I have a small setup of 3 catalyst switches. CAT6509 main switch is
having 2 SUP module (one
Infotech wrote:
Group Pls help me with this config:-
cat 4k switch---cat6509 vlan 1 Vlan2
NT PDC 1NT PDC 2
USERx USERy
I have a small setup of 3 catalyst switches. CAT6509 main switch is
having 2 SUP module (one
Dear Group,
I have a small query:
Is it advisable to disable broadcast on all the ports of switches. I have 3
catalyst series 6509/5500/5505 in my network running all the WINNT servers
4.0
with all win98/win95 as clients. With the help of CWSI I have observed that
many a times the broadcast
Group Pls help me with this config:-
cat 4k switch---cat6509-- cat 4k switch
vlan 1 Vlan2
NT PDC 1NT PDC 2
USERx USERy
I have a small setup of 3 catalyst switches. CAT6509 main switch is
having 2 SUP module (one
10 matches
Mail list logo