I have 4 interfaces:
Serial 0/1 - public IP for example 1.1.1.1
fast 0/1 -public IP for example 2.2.2.2
fast 0/0 -LAN IP : 192.168.1.1/24
My ip address pool for VPN : 192.168.1.170-192.168.1.190
On VPN padlock i haver Ip address from router for example 192.168.1.170
but I can't ping any address
I have some problems with my Ipsec configuration.
My configuration is like:
Internet---HQ---Internet--Office1
|
|InternetOffice2
Between HQ and Office i want to use VPN connection with Ipsec.
How should I make connection between Office1 and
thank you very much.
You advices were very helpful
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=12083t=11896
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and
I have 2 ISP and 2 serial and 2 ethernet in my 2509 Cisco router.
I want half my LAN goes through ISP1 and serial 0 and ethernet 0.
And the other through ISP2 and serial1 and ethernet1.
How should I do this ?
What combination with route map should I use ?
Message Posted at:
route-map command and routing policy on cisco routers
?
MacDonald wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
is your Router has AS number
Use BGP multi homing config
Jacek Malinowski wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I have 2
I have very big problem in Ethernet on my 4500 Cisco router.
The problem is when some station are pinging my ethernet ip on the router.
In some case the station can't ping my ethernet ip.
After command clear arp cache on my Cisco router the station can ping my
ethernet ip.
I gave on the ethernet
Is there possible configure QoS on switch 2924 XL ?
What software number I need ?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=9843t=9843
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
I think there is a problem with bad encryption or password.
Both side must have the same encryption,hash, and first of all password when
you use pre-share.
Gonzalo P. wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Derek,
Could you add some lines of the configuration? it
I've use 2 Cisco 1750 and Ipsec between them.
I have problem with transmision, in some case Ipsec does work.
Is it the problem in lifetime configuration ?
What are the optimal configuration for lifetimes ?
I've use 1000 sec. for Isakmp and Ipsec ?
Message Posted at:
I have the Ipsec connection between 2 LAN's:
A LAN 10.10.10.0 /24
|
router A 1750 195.111.111.1 /30
|
Internet
|
router B 1750 200.230.20.1 /30
|
B LAN 10.10.50.0
My access-list are:
Router A
access-list 110 permit ip 10.10.10.0 0.0.0.255 10.10.50.0
Hey
I have a big problem with Cisco router and Allied Telesyn routers.
First of all I want to make VPN conenction between Cisco (2611) and
Allied(AR320S).
On the Allied site there is an example, but it does work :(.
First of all i have used ISAKMP on both routers (cisco and allied).
On debuggind
I want to thank everyone for help.
But I forgot to specify that running BGP is impossible.
The company has a small network (100 users) and connection to Internet
through ISP B (like on the picture). That link must be always up.
The problem is that the company want to test another connection to
I want only to know if I've a default route ( 0.0.0.0 0.0.0.0 serial 1),
and ip policy route-map on the ethernet interface,
I'll go always trough serial 1 or if the match criteria are met I'll go
trough serial 0 ?
_
FAQ, list archives, and subscription info:
I have a big problem with the route-map command.
My network looks like :
ISP A ISP B
| |
| |
| |
--s0--(router 2611)--- s1--
configuration (hypothetical):
guess, but how about setting the next hop in the route-map
to
the IP address of ISP A?
- Original Message -
From: Jacek Malinowski
Newsgroups: groupstudy.cisco
To: [EMAIL PROTECTED]
Sent: Saturday, March 03, 2001 9:27 AM
Subject: Route-map
I have a big problem with the route-map com
15 matches
Mail list logo
