Howto log failed login attempts? [7:64146]

I would like to log all failed (and maybe even all successful) login attempts on a router to my syslog server, but I can't find a way to do this. Since I'm using a local user database, with login local on the VTY, I would like to see what user acconts are beeing tried at the logon prompt. Can anyo

Reverse Telnet SW for PC? [7:37246]

Does anybody know if there's any software out there to turn a PC into a "Cisco 2509"? What I need is the abillity to telnet to the PC and get the telnet traffic redirected out a COM port, just like reverse telnet in the Cisco. One solution is of course to get a 2509, but for the moment my budget w

VPN 3000 Auth. with W2k ActiveDirectory? [7:35270]

Is it possible to get the VPN 3000 Concentrator to authenticate dial-in users using an internal Windows 2000 Active Directory, or is it only the "old" Windows NT 4 Domain model that's supported? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=35270&t=35270 -

RE: 3rd party Flash memory [7:28823]

I upgraded a 2600 and a couple of 2500's some time ago. The 2600 worked just fine and so did the flash memories to the 2500's. The 2500 DRAM's however... To make a long story short, it turned out that since there is a large number of revisions of the 2500 not all memories worked in all boxes. In

C2620 with NM-1FE1R2W? [7:28716]

Does a NM-1FE1R2W= work in a Cisco 2620 router? I thought all NM's worked in both the C26xx and C36xx series, but I can't get this configuration to work. When I look in the HW/SW compability matrix only SW for the C36xx is shown for this module. Any suggestions? Message Posted at: http://www.

RE: 2500 IOS TFTP Problem - For a change! (sarc) [7:25144]

I had some trouble downloading a new BIG 12.2 image to my 2500. It erased the flash OK and started the download, but rebooted after a few packets. This seemed to be due to a bad DRAM, and when I removed that the download worked just fine. /Johan Message Posted at: http://www.groupstudy.com/for

RE: C2500 DRAM problem [7:24954]

I had the exact same trouble with the bootstrap memory test, so I searched the CCO and came up with the following links: Bootstrap Program http://www.cisco.com/univercd/cc/td/doc/product/access/acs_fix/cis2500 /2505/2500him/76996.htm (Watch the URL-wrap!) Bootstrap Diagnostic Tests http://www.ci

C2500 DRAM problem [7:24954]

I've got some problem with a couple of 16MB DRAM modules for my C2500 routers. I bought non Cisco memories for my lab routers, but I get Parity Error alot and the router just reboots. I also bought non Cisco flash modules, but these seems to work just fine. Is there some way to run a verbose chec

IP Tunnel on different port? [7:23750]

Hi, I'm trying to figure out if it's possible to create some sort of IP tunnel on a port of my choice. My problem is that I'm behind a firewall beyond my administration and I want to create a connection between my homesite and my protected lab environment inside the FW. The firewall is open only f

RE: Foundation Exam Opinion [7:14353]

as pretty clear just reading the first question. The test is longer and has more questions than one individual test, but on the other hand, it's shorter and has fewer questions than the three tests alltogether. Johan Hjalmarsson ABB Communications AB Malmö, Sweden CCNP, CCDP, MCP Mes

RE: Reverse Telnet [7:14317]

First you need to know the line number of the AUX port on your device. You can find this by looking at the output from the "show line" command. On a 2501 the AUX port is line number 1. Next add 2000 to this linenumber, e.g 2001 for the C2501. Now all you need to do is to add a host statement that

RE: Config Register Weirdness, again... [7:9181]

Here's a readout of the bits in the config-register. Bit#Configuration register option settings: 15 Diagnostic mode disabled 14 IP broadcasts do not have network numbers 13 Boot default ROM software if network boot fails 12-11 Console speed is 9600 baud 10 IP broadcasts