People, yesterday I took the 640-604 exam and passed with 901, I did spend
37 minutes to answer the questions which were so well defined.
Used only the cisco press certification guide for the 504 exam and some lab,
I can say the material for 504 covers very well the 604 contents. So, those
who has
Anybody could tell me how much do you pay for try the ccie lab?
I4ve heard that for written test the price is $300, but for the lab I never
heard about.
thanks,
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=55487&t=55487
--
FAQ
Guys, if one take a ccnp exam today, is there a time limit to take the other
3 exams or else the exam gets invalid?
Can someone help me?
tks a lot,
leo
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=54848&t=54848
--
FAQ,
Anyone who experienced monitoring Cisco Router=B4s CPU Load could tell =
me the
OID used?
By the way, if the procedure to generate the cfg file if it is =
different is
welcome!
=20
Thanks a lot people,
=20
leo
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=54174&t=54174
-
People,
Any advise for my problem is welcome :
I have an 2501 with a 4MB DRAM module that works fine. Yesterday, I got 3
differents 8MB DRAM modules and I tried to upgrade it, but when it boots, it
shows me only 4MB DRAM.
I tried change the first module but, the other two gave me the same symp
Hi all,
Anyone who took the CCNP/DP Foundations Exam could give me some comment
about it?
The CCNPs could talk about the two ways for achieve the certification : one
exam in each time +
CIT or Foundations + CIT. What are the good and the bad points on each way
on your opinion?
tks in advance,
Hi people,
Anybody who used the Cisco Press -CCDA Exam Preparation Guide- and took the
DCN exam could give some advise about it? Is only it sufficient or the exam
prep?
tks a lot,
leo
ccna
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=36762&t=36762
---
What is the passing marks for the exams:?
640-503 - Routing
640-504 - Switching
640-505 - Remote Access
640-506 - Support
thanks a lot,
Leonardo, ccna.
[EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=31503&t=31503
--
Hello people,
I would like thanks all you who help me on the way for cert.
Yesterday I got my CCNA with a score 913. My study material was the CCNA
Preparation guide by Wendell Odom and CCO, I think this two are the
essencial material for test studing.
For all that will try STUDY, STUDY and
Dear, try this simple config on router :
line aux 0
transport input all
modem inout
flowcontrol hardware
speed 38400
If problem persists, look this page :
http://www.cisco.com/warp/public/471/50.html
GooD LucK
-leonardo.
-Mensagem original-
De: [EMAIL PROTECTED] [mailto:[E
Hello,
anybody who took ccna test 2.0 got ATM or Gigabit Eth, Token Ring
questions??
at Cisco preparation guide they sign this. Is it true?
thanks,
-leonardo
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
__
dear,
do not forget setting the port 80 to deny www access ok.
best regards,
-leonardo
-Mensagem original-
De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]Em nome de beth
shriver
Enviada em: terça-feira, 5 de setembro de 2000 17:16
Para: [EMAIL PROTECTED]
Assunto: access list is not w
Dear,
With a
Syslog Server you can do this.
You need set aaa accounting and logging
commands correctly. (at Cisco´s site you can find
exemples!).
good
luck,
-leonardo
-Mensagem original-De: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]Em nome de Henrique Issamu
TeradaEn
Hello group,
could anybody tip me some site where I can found basic information about IP
integration with SNA, execpt the Cisco´s Site.
tks in advance,
leonardo.
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and su
Stan,
verify if is not there some access-list applied to filter telnet trafic (to
some servers) through the router!
Once I apllyed a a-list denying telnet access through the router and when I
was telneting the router, it gets connection but do not prompt me the
password´s request.
Verify, this c
Jim,
If you configure the Media Player to not use HTTP, it will use port 1755.
I think it´s only one way to do this: - Configure the media player to not
use http and create a access-list denying all to use remote port 1755.
*Without configuring the media player to do this, it will always use por
for back up, use a tftp server - any download site has one for free.
for managing, configure snmp in the routers/switches and find "Router IP
Console" in www.innerdive.com, it's trial for 30 days. I think it's good
when working with snmp.
Or, if you want spend money, buy the CiscoWorks 2000, hehe
Type the "terminal monitor" command in the privileged EXEC mode to see the
debugging.
Leonardo.
-Original Message-
From: Omer [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, June 27, 2000 10:49 PM
To: Cisco Group Study
Subject: No debug over telnet
Hello,
I have noticed that although I can
18 matches
Mail list logo