Re: DS3 slow connection problem. [7:65491]

Hi Jim, Here's the output you wanted. I was thinking about the cablelength so I might give it a try in the morning becaause it looks to me like more than 10 feet but not alot more perhaps 15-20, Also, the wiring was previously working fine in the same place but conected to a converter then into a

RE: DS3 slow connection problem. [7:65491]

Hi Again Everyone, Just to let you all know, this morning I changed the 7200 router serial interface clock to int and left the 7500 clock set to line, this actually made the connection worse, I got 5% packet loss as opposed to 1% packet loss when both router interfaces were set to line, I changed

RE: DS3 slow connection problem. [7:65491]

Brilliant! Thanks everyone. I'm going to work on it in the morning and i'll let you know how I get on. Mark. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=65523&t=65491 -- FAQ, list archives, and subscription info: http://www.gro

RE: DS3 slow connection problem. [7:65491]

Thanks Spio, I've cleared the counters for "show int" and noticed that the input errors are showing up on the 7200 and not on the 7500 which might make things a bit clearer, the counters hadn't been cleared since installation so the 7500 input errors might have been from when it was first brought

DS3 slow connection problem. [7:65491]

Hi All, I need some help to troubleshoot a problem, I have a 7500 router with a ds3(45Mbps) connected to a 7200 ds3 (45Mbps). The line appears to be very slow and is showing input errors on the 7200 and 7500 serial interfaces. Here's some info below from the serial interfaces on both the 7200 and

Foundry serveriron problems [7:58767]

Hi, I know this board is strictly cisco but i have a problem that is somewhat related, as you probably know the foundry kit uses alot of the same commands as cisco kit so i thought you may be able to help. I have a foundry serveriron and someone has erased the flash by mistake, so now it only boo

RE: Help needed with an extended access list [7:53971]

Brilliant, thanks Carl i'll try it in the morning. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=54005&t=53971 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondiscl

Help needed with an extended access list [7:53971]

Hi All, I need your help please, here's a question about extended access lists, I have a network address of 171.17.0.0 and I need to divide this into 1024 subnets which means I have to use a mask of 255.255.255.192. The first usable subnet is 171.17.0.64 giving a usable range for the hosts add

Re: MIB strings CAT6506 [7:52995]

Thanks for your input, however I am trying to pull the stats off a physical port on a Catalyst 6500 when I poll/snmpwalk the switch I get a different value than that is on the Cat If you look at the data below you will see that line 8,and 9 are the traffic in and out. However I don't know the mib

MIB strings CAT6506 [7:52995]

Hi Does any one know what are the Mib strings to monitor the traffic (Octets) in and out of a physical port on a Catalyst 6506 Using the "Show Counter 3/1" tells me but I want to use SNMP to graph the traffic. Thanks Mark. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=5299

CAT6500 rebooting into boot mode [7:52654]

HI, I have a problem with our cat6500, an ospf change on the network caused by resetting one of our nortel routers is resetting the Cat6500 and I don't know why, also, for some reason when the 6500 MSFC comes back up it's in boot mode. Does anybody know why this could be happening? Your help on