Works fine for me...
ip address outside dhcp setroute
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
Mike
--- H Howard Lewis Bloom
wrote:
> I updated a PIX 506 with 6.2.2 and the lastest PDM.
> I did the setup
> through the PDM, setup PAT for the outside to inside
> interface,
I've been having a strange problem. When reverse
telnetting from my 2514's AUX port to my 25xx's
console port (I've tried multiple routers). I am
sometimes losing packets during show commands. The
router that initiates the reverse telnet cpu is at
most 35%. I've tried using variations of flow
I'm interested in building a PIX out of a PC. The only
problem is finding an affordable 16MB Flash ISA Card.
Cisco's part number PIX-FLASH-16MB. The cheapest I can
find is $700. For that I could buy a used 506. Does
anyone know of a more affordable solution? Is their a
generic card that can be mod
I have a home lab consisting of 2500's, 2600's, and
3620's. Some of their fans are really loud. I am
thinking of replacing them w/ fans that are more
quiet. Does anyone have experience with this that can
recommend a manufacturer or reseller?
Thanks,
Mike
__
2610's (with the recent IOS) can do it. I have it
working in my home lab. 2500's can NOT do 802.1q
encapsulation, I believe it is a limitation of the
ASIC. Port speed has nothing do with it.
Mike
--- Connie Nie wrote:
> I don't think you can do that on a 10M interface.
> Has to be a fast ethe
I have a home lab of about 10 routers. Is there a way
to reduce or eliminate the fan noise? Are there
replacement fans that are less noisy? Anyone have any
tips? The noise is driving me kind of crazy and it
can't be good for my hearing in the long term.
Thanks,
Mike
_
What are the best books to buy or places to obtain
router labs? I already have the CCIE Lab Practice Kit
from Satterlee & Hutnik. Are there labs that take you
from the basics to more complex scenario's? I want to
build a strong foundation and then jump into the CCIE
level labs.
Thanks,
Mike
_
Does anyone know specifically what hardware Cisco
replaced to correct this problem? CPU? Motherboard?
RAM? NIC?
Thanks,
Mike
--- Dale Wishop wrote:
> We had a PIX 506 with this problem. Field notice is
> at:
>
> http://www.cisco.com/warp/customer/770/fn15490.shtml
>
> But, the field n
ct
> the Technical Assistance Center by following the
> instructions at the end
> if this notice and request a standard RMA.
>
> Bri
>
>
> On Mon, 8 Jul 2002, Michael Gunnels wrote:
>
> > Does anyone know specifically what hardware Cisco
> > replaced to cor
I have 3 for sale (New In Box).
Mike
--- "Kaminski, Shawn G"
wrote:
> Juan,
>
> Better check with the wife first! :-)
>
> Shawn K.
>
> > -Original Message-
> > From: Juan Blanco [SMTP:[EMAIL PROTECTED]]
> > Sent: Tuesday, July 30, 2002 5:59 PM
> > To: [EMAIL PROTECTED]
I have been having a recurring problem in the past 2
weeks (usually daily) which is solved by power cycling
my Motorola Surfboard 4100 cable modem. I'm using a
PIX 520 firewall with the attached config.
When the problem occurs, the cable modem's LED's
appear normal. And Comcast is able to ping
11 matches
Mail list logo